SPECIAL REPAIRS TO BUILDING No T 39 COOK HOUSE OF CERTAIN UNIT AT MARIANI IN JORHAT MILITARY STATION UNDER GE JORHAT

Amount

Demolition of cement concrete (un reinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as directed.

Demolition of cement concrete (un reinforced) in any position not otherwise specifically provided for, complete all as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

Dismantling timber scantling in unframed work, 40 Sq cm and over in section, in any position, complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n. exc. 1.5 Sq. M each, complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sq. M but not exc. 4.0 Sq M each, complete all as directed.

Taking down, shutters of any description not exceeding 1.00 Sq M each, complete all as directed.

Taking down, shutters of any description exc. 1.00 Sq. M and n. exc. 2.00 Sq. M each, complete all as directed.

Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as directed.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as directed.

Taking up or down, steel tubing 15 mm bore, and connection including cleaning for re-fixing or removal from site of work complete all as directed.

Taking up or down, steel tubing 20 mm bore, and connection including cleaning for re-fixing or removal from site of work complete all as directed.

Dismantling water tanks of capacity exceeding 500 litres & not exceeding 1000 litres and removing to store for taking credit,complete all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil ,complete all as specified and directed.

Returning filling in soft/loose soil, including, spreading levelling watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and directed.

Materials and Labour for plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate as in surface channels and drains complete all as specified and directed.

Materials and Labour Extra for forming fair finishing to surfaces channels/drain 30 cm inner girth in cement concrete,using extra cement, including forms, moulds, etc.,complete all as specified and directed.

Add or deduct from serial item No 20 here in before for each 25 mm girth or part thereof over or under 30 cm for forming fair finished drain or channel in cement concrete, using extra cement including forms, moulds, mitered /stopped ends etc. complete.

Materials and Labour for plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work complete all as specified and directed.

Supply only integral water proofing compound all as specified

Materials and Labour for,cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, in stone concrete block or slab walls, complete all as specified and directed.

Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6), complete all as specified and directed.

Supply and Fix, second-class hard wood timber scantlings, wrought, in unframed works and in any position, fixed with nails complete all as specified and directed.

Supply and Fix, second class hard wood, plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue, pinned at joints, complete all as specified and directed.

Supply and Fix, 30 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Supply and Fix, 30 mm thick, second class hardwood, glazed skeleton shutters, open rebated and prepared to receive glass, gauze etc. ,divided into squares, with plain,chamfered or rounded,mitred and rebated sash bars,any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of windows, ventilators provided with stiles and rails as specified in SSR Part I Section 8, clause 8.24 (b) and fitted to chowkhats complete all as specified and directed.

Supply and Fix, 35 mm thick,second class hard wood, glazed skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of shutters as specified in SSR Part I Section 8, clause 8.24 (a) and fitted to chowkhats complete all as specified and directed.

Supply and fix second class hard wood small fittings such as brackets of any type, latch and hinge blocks shaped door and windows stops and the like, including all necessary labours; articles n. exc. 200 Cu cm each complete all as specified and as directed.

Supply Only, mild steel butt hinges, medium weight, cold rolled 50 mm size,complete all as specified and directed

Supply and Fix, mild steel butt hinges, medium weight, cold rolled 75 mm size complete all as specified and directed

Supply and Fix, mild steel butt hinges, medium weight, cold rolled 100 mm size complete all as specified and directed

Supply and Fix,continuous (piano) hinges,brass, width of flaps (when open) 30 mm,complete all as specified and directed

Supply and Fix ,mild steel barrel tower bolt, black Japan finished, with bright bolt 125 mm long, complete all as specified and directed.

Supply and Fix ,mild steel barrel tower bolt, black Japan finished, with bright bolt 200 mm long, complete all as specified and directed.

Supply and Fix, aluminium handles, cast type, anodized, 125 mm size, complete all as specified and directed.

Supply and Fix, aluminium handles, cast type, anodized, 150 mm size, complete all as specified and directed.

Supply and Fix, Mild steel sliding door bolts,length of bolt 300 mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

Supply and Fix,harrison rails,anodised aluminium alloy, with fixing brackets,stops, rollers etc., complete all as specified and directed.

Supply and Fix, cast iron body, door closer hydraulically regulated, designation No. 1 universal type,suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed, complete all as specified and directed.

Supply and Fix,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Supply and fix mild steel TMT bars 6 mm to 8 mm dia., cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.

Materials and Labour for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Grade E-165 complete all as specified and directed.

Materials and Labour for mild steel works, conforming to Fe 290, Grade E-165 , in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles, complete all as specified and directed.

Supply and Fix, pressed steel frames, size 125 x 60mm, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and directed.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed.

Material and Labour for,Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre,complete all as specified and directed.

Materials and Labour for, 4 mm thick, high pressure steam cured (HPSC) non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/Aluminium framework with screws, complete all as specified and directed.

Materials and Labour for, 4 mm thick, No of ply 3, plywood, grade BWR, type BB, fixed with screws to timber frame work,complete all as specified and directed.

Materials and Labour for, 18/19 mm thick particle board, medium density, flat pressed,single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work,complete all as specified and directed.

Materials and Labour for, glazed ceramic coloured tiles, 300 X 200 X 7mm thick, conforming to IS 15622, economy class, Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3), complete all as specified and directed.

Materials and Labour for,Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,conforming to IS 15622, economy class, Grade B IIa, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4), complete all as specified and directed

Materials and Labour for machine cut Kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed bed or bedding layer of cement mortar (1:4), complete all as specified and directed.

Materials and Labour for machine cut Kota stone slab 20-25 mm in raisers of steps, skirting, dado and pillar, laid over and including 15 mm thick screed bed of cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Materials and Labour for,Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C1 using 20 mm graded aggregates as in floor/plinth protection including finishing surface even and smooth without using extra cement , complete all as specified and directed.

Materials and Labour for, forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A', complete all as specified and directed.

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork and finishing surface even and smooth without using extra cement, complete all as specified and directed.

Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)

Material and Labour for applying three coats of white wash to new fibre board surfaces in ceiling,complete all as specified and directed.

Materials and Labour for applying applying two coats of distemper oil emulsion,white or tinted,to new plastered surfaces on walls including priming with alkali resistant priming paint over 1 mm thick wall care putty,and including preparation of surfaces, complete all as specified and directed.

Material and Labour for washing,rubbing down and stopping of distempered and painted surfaces and applying two coats of oil bound distemper,white or tinted over 1 mm thick wall care putty,on walls, complete all as specified and directed.

Materials and Labour for, two coats of 100% Acrylic Exterior Emulsion Paint, white or tinted, on walls over a coat of primer, including preparation of new plastered surfaces, complete all as specified and directed. (Berger Paints:Weather Coat XP Advance/Asian Paints:Apex Ultima/ ICI Paints: Dulux Weather Shield Max/ Jenson & Nicholson Pvt. Ltd.: Safeguard Optima)

Materials and Labour for, washing,rubbing down and stopping of painted surfaces and applying two coats of 100% Acrylic Exterior Emulsion Paint, white or tinted, on walls, complete all as specified and directed. (Berger Paints:Weather Coat XP Advance/Asian Paints:Apex Ultima/ ICI Paints: Dulux Weather Shield Max/ Jenson & Nicholson Pvt. Ltd.: Safeguard Optima)

Supply and Fix,3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sq M in each pane complete all as specified and directed.

Material and Labour for applying one coat of synthetic enamel paint on old painted steel and iron surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

Material and Labour for applying one coats of synthetic enamel paint on old painted wood or wood based surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.

Material and Labour for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I complete, all as specified and directed.

Materials and Labour for, Ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed complete all as specified and directed.

Supply and Fix, bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, 15 mm bore and fixed, complete all as specified and directed.

Supply and Fix, stop valves, cast copper alloy,chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed.

Supply and Fix, pillar taps, cast copper alloy, with capstan heads, fancy type,chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore,complete all as specified and directed.

Supply and Fix, PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified and directed.

Supply and Fix in repairs, vitreous china wash basin, white, flat back, size 550 X 400 mm excluding taps, waste chain and porcelain stopper, but including brackets,complete all as specified and directed.

Supply and Fix in repairs, sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm,complete all as specified and directed.

Supply and Fix, 50 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe, complete all as specified and directed.

Supply,installation,testing and commissioning of ,spherical wind driven turbine ventilator with aluminium ventilator material and stainless steel (SS 304 Grade) hardware, 18 mm dia.SS center shaft with two nos self lubricated ball bearings,outer dia of turbine min 760 mm, doom dia. min. 380 mm,rotor dia. min 655 mm,throat dia. min 610 mm, height min 360 mm,with minimum 38 Nos of statically and dynamically balanced aluminium alloy vanes of 0.50 mm thickness,including provision of translucent UV stabilized FRP Base plate of size 1600 mm x 1050 mm ( Approx.),complete all as specified and directed. Mfg: Alpha PEB Ltd.,Chennai - 600008/Air Roof Ventilators,Bengaluru - 560097/TurboVentilators India (http://www.turboventilatorsindia.com).

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down copper/aluminium sub main wiring complete and removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking out unserviceable, U/G cables, 1100 Volts grade from trenches/ ducts/ poles etc of size 25 Sq. mm 4 Core complete all as directed.

Taking down existing, galvanized steel tubing, 40 mm bore, of any grade,in trenches or fixed to poles/Walls etc,including all fittings, complete all as directed.

Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC Conduit complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for, one light point or one fan point controlled by one switch, complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core,laid in and including PVC Conduit complete with all fittings and accessories, fixed to walls/ceiling,including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 pin socket outlet, 5 Amps on the same board with other switches,complete all as specified and directed.

Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC Conduit complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for, one 3 pin socket outlet 5 amps, independent,complete all as specified and directed. .

Materials and Labour for concealed type point wiring with 2.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC Conduit complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for, one 3 pin socket outlet 15 amps, independent,complete all as specified and directed. NOTE:- (Applicable to Serial Item No. 89,90,91 & 92 Here in Before): - The quoted rates are deemed to be inclusive of the rate for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth, in brick/concrete block walls.

Supply and Fix, switch piano, flush button, single pole, one way, 5 Amps, complete all as specified and directed.

Supply and Fix, socket outlet 2 in 1, 3 pin, 5A, complete all as specified and directed

Supply and Fix, switch socket combination, 3 pin, 5 Amp,flush type , complete all as specified and directed.

Supply and Fix, switch socket combination 2 in 1, 3 pin, 5 and 15 Amp, flush type, universal,complete all as specified and directed

Supply and Fix stepped type electronic fan regulator, flush type, on existing phenolic laminated sheet etc. as required , complete all as specified and directed.

Supply and fix Ceiling Rose, three terminal, PVC/ Polycarbonate insulated body, complete all as specified and directed.

Supply and Fix,LED batten with fire retardant poly carbonate housing and opal poly carbonate diffuser, with white LEDs,1X20 W, with electronic driver complete with all accessories internally pre wired,including lamp,complete all as specified and directed. [Cat No. "20W T5 60K LED Batten" Code 6BP2608F020 of Make 'Eveready' or equivalent Model of Make 'Philips'/ 'Bajaj'/'Crompton Greaves']

Supply and Fix,LED batten with fire retardant poly carbonate housing and opal polycarbonate diffuser with white LEDs,1X10 W, electronic driver complete with all accessories internally pre wired,including lamp,complete all as specified and directed. [Cat No. "10WT560K 2ft Batten" Code: 6BP2608T010 of Make 'Eveready' or equivalent Model of Make 'Philips'/ 'Bajaj''Crompton Greaves']

Supply and Fix, LED panel 18 Watts, recess mounted down lighter,round, with polycarbonate housing and polycarbonate diffuser,lumen efficacy up to 100lm/W, CRI :>80,intregrated driver, THD:<20%, integrated colour temperature:6500K, surge protection:2.5 KV, operating voltage:220-240 V AC, Ta:-10°C to 45°C, complete all as specified and directed. [Cat No. "LED Panel 18 W 65 K RD Recess PC Backlit I " Code:6PP26I8RB18 of Make 'Eveready' or equivalent Model of Make 'Philips'/ 'Bajaj']

Supply and Fix in repairs, LED street light fittings, 30 Watts,CCT 5700°K,with single piece pressure die cast aluminium housing and secondary optics with individual LEDs,intregrated driver, surge protection 10 KV and degree of protection IP-65,including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.75 Sq mm, 3 core, 1100 Volts grade, from light fitting to point outlet,and including provision of fixing bracket made out of 25 mm bore galvanized steel tubing, medium grade, (1.5 RM Approx), bent to shape required and fixed to wall/pole with FI clamp 25 X 3 mm, nuts, bolts and washers complete all as specified and directed. [Cat No.LEDSLO30157-02, Code:"6R57PAA7030" of Make 'Eveready' or equivalent Model of Make 'Philips'/ 'Bajaj'/'Crompton Greaves']

Materials and Labour for concealed sub main wiring with two single core FRLSH PVC insulated unsheathed cable 4.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade and continuous earth wire of two single core FRLSH PVC insulated, unsheathed cable 2.50 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in PVC conduit, complete all as specified and directed.

Materials and Labour for concealed sub main wiring with two single core FRLSH PVC insulated unsheathed cable 6.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade and continuous earth wire of two single core FRLSH PVC insulated, unsheathed cable 4.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in PVC conduit, complete all as specified and directed. NOTE :-(Applicable for Serial Item No. 103 & 104) The quoted rates are deemed to be inclusive of the rate for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth, in brick/concrete block walls.

Supply and Fix, double door, sheet metal enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 200 Amps rated bus bar, Single Pole & Neutral, complete all as specified and directed. [Cat No.DBSPN008DD of Make L&T or equivalent Model of Make Legrand/Siemens]

Supply and Fix, double door, sheet metal enclosure for DBs for mounting of MCB, 415 Volts,12 way,Triple Pole & Neutral,complete all as specified and directed [Cat No.DBTPN012DD of Make L&T or equivalent Model of Make Legrand/Siemens]

Supply and Fix, miniature circuit breaker (MCBs) single pole, 240 Volts, 10KA, 6 to 32 Amps complete all as specified and directed. [Cat No BB10060C/BB10100C/BB10160C/BB10200C/ BB10250C/ BB10320C of Make “L&T” or equivalent Model of Make Legrand/Siemens]

Supply and Fix, miniature circuit breaker (MCBs) double pole, 240 Volts, 10KA, 40 Amps complete all as specified and directed. [Cat No.BB20400C of Make “L&T” or equivalent Model of Make Legrand/Siemens]

Supply and Fix, miniature circuit breaker (MCBs) four pole, 415 Volts, 10KA, 40 to 63 Amps complete all as specified and directed. [Cat No.BB40400C/BB40500C/BB40630C of Make “L&T” or equivalent Model of Make Legrand/Siemens]

Horizontal boring of holes, under road/ pavement / hard standing etc.,not exceeding 10 Metres in length, in any type of soil, suitable for passing through 40 mm bore, galvanised steel tubing,complete all as specified and directed.

Supply and Laying galvanized steel tubing, 40 mm bore, light grade, in trenches or fixed to poles/Walls etc., for cable protection, complete all as specified and directed

Supply,laying, jointing and testing of , XLPE insulated, PVC sheathed, armoured, heavy duty electric cables with aluminium conductor for working voltage up to and including 1100 volts, of cross sectional area 25 sq. mm 4 core,complete all as specified and directed.

Supply and filling in dry sand in cable trenches before and after the cables are laid, as in sand cushioning to cables, complete all as specified and directed.

Supply and laying common burnt clay building bricks, sub-class ‘B’ designation 75, old size bricks, in cable trenches, as cable protection, complete all as specified and directed.

Materials and Labour for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanised steel earth lead wire 4 mm dia. by means of bolts, nuts check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009)

RAJGURU & CO