Installation and commissioning of 1000 mm conveyor belt no T2 B4 and B2 in RVIIB seam Shyamsundarpur Colliery under Bankola Area

Amount

Installation, commissioning & extension of 1000mm wide x 525 mtr long 90KWx2 550 volt belt conveyor in RVIIA seam from 31L/10ED to 46L/10ED for T2 panel of SHCM at Shyamsundarpur colliery under Bankola Area.

Transportation and installation of complete drive drum driven drum with gear, motor, base frame - 12.5MT+ discharge unit-2.5MT+tail end -1MT+Load table-1MT+Ioop take up with tension trolley drum-3.60MT+Fix unit-1MT+motor, winch starter and switches cables etc -2.0MT+1000mm wide conveyor structure with top, bottom roller and foot stool-525mtr @106Kg/mtr =55.65MT +13 times Tail end shifting(extension)13 MT= total weight= 92.25 MT

Fitting of tail end and discharge scraper.

Belt laying including transporting of belt, jointing, tensioning,trial run etc

Foundation bolting for fitting of drive unit , discharge unit, loop take up and taii end etc=120nos

Cleaning of coal and unused materials before installation job

Making and fabrication of new discharge unit

Making, and fabrication of Load table

Fencing of drive loop take up and tail end

Making vertical support from roof and floor for hanging theconveyor structure from drive head to discharge by welding, gas cutting etc. considering Cost of consumables.

Cost of Belt fastener/joint E-35 Comb and grip type suitable for Mato make machine available in mines.

Drive base frame, Loop take up base and discharge base cernet concrete.

Installation, commissioning, extension and dismantling of 1000mm wide x 455 mtr long 90KWx2 550 volt belt conveyor in RVIIA seam from 37L/10ED to 37L/10ED for B4 panel of SHCM at Shyamsundarpur colliery under Bankola Area.

Transportation and installation of complete drive drum driven drum with gear motor base frame -12.5MT+discharge unit- 2.5MT +tail end -1MT+Load table-1MT+loop take up with tension trolley drum-3.60MT +Fix unit-1MT+motor, winch starter and Switches cables etc -2.0MT+1000mm wide conveyor structure with top, bottom roller and foot stool-455mtr @106Kg/mtr =48.23MT +11 times Tail end shifting(extension)-11MT= total weight =82.83 MT

Fitting of tail end and discharge scraper.

Belt laying including transporting of belt, jointing, tensioning,trial run etc.

Foundation bolting for fitting of drive unit, discharge unit, loop take up and tail end etc =120nos

Cleaning of coal and unused materials before installation job.

Making, and fabrication of Load table.

Fencing of dive ,loop take up and tail end.

Making vertical support from roof and floor for hanging theconveyor structure from drive head to discharge by welding,gas cutting etc. considering cost of consumables.

Dismantling of complete drive drum driven drum with gear motor base frame -12.5MT+discharge unit-2.5MT+tail end - 1MT+L0ad table-1MT+loop take up with tension trolley drum-3.60MT+Fix unit-1MT+motor, winch starter and switches cables etc -2.0MT+1000mm wide conveyor structure with top, bottom roller and foot stool-455mtr @106Kg/mtr =48.23MT = total weight =71.83 MT

Taken out and coiling of belt.

Cost of M.S. Nut bolts and washers

Cost of Belt fastener /joint E-35 Comb and grip type suitable for Mato make machine available in mines.

Drive base frame, Loop take up base and discharge base cement concrete

Installation, commissioning, and dismantling of 1000mm wide x 490 mtr long 90KWx2 550 volt belt conveyor in RVIIA seam from 39L/10ED to 39L/4WD for B2 panel of SHCM at Shyamsundarpur colliery under Bankola Area

Transportation and installation of complete drive drum driven drum with gear motor base frame -12.5MT+discharge unit- 2.5MT +tail end -1MT+Load table-1MT+loop take up with tension trolley drum-3.60MT +Fix unit-1MT+motor, winch starter and Switches cables etc -2.0MT+1000mm wide conveyor structure with top, bottom roller and foot stool-490mtr @106Kg/mtr =51.94MT +12 times Tail end shifting(extension)-12MT= total weight =87.54 MT

Fitting of tail end and discharge scraper.

Belt laying including transporting of belt, jointing, tensioning,trial run etc.

Foundation bolting for fitting of drive unit, discharge unit, loop take up and tail end etc =120nos

Cleaning of coal and unused materials before installation job.

Making, and fabrication of Load table.

Fencing of dive ,loop take up and tail end.

Making vertical support from roof and floor for hanging theconveyor structure from drive head to discharge by welding,gas cutting etc. considering cost of consumables.

Dismantling of complete drive drum driven drum with gear motor base frame -12.5MT+discharge unit-2.5MT+tail end - 1MT+Load table-1MT+loop take up with tension trolley drum-3.60MT+Fix unit-1MT+motor, winch starter and switches cables etc -2.0MT+1000mm wide conveyor structure with top, bottom roller and foot stool-490mtr @106Kg/mtr =51.94MT = total weight =75.54 MT

Taken out and coiling of belt.

Cost of M.S. Nut bolts and washers

Cost of Belt fastener /joint E-35 Comb and grip type suitable for Mato make machine available in mines.

Drive base frame, Loop take up base and discharge base cement concrete

Total impact of GST for the purpose of CTC

SWAPAN KUMAR AKHULI (BID ID -1133674)