CERTAIN B/R REPAIR WORKS TO UNIT UNDER AGE B/R-II OF GE GOLCONDA

Amount

Demolition of cement concrete in ground floor or paving of any description n.exc. 15cm thickness (Un re-inforced) below or above GL including removing the debris outside MD land complete all as specified and directed.

M&L 100 mm thick cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) for footpath / hardstanding finished spike rolling to surface or making impression of expanded metal while the concrete is green complete all as specified and directed.

M&L chequered cement concrete coloured tiles, textured finished of size 250 x 250 x 22 mm/ 300 x 300 x 22 mm thick set jointed in neat cement slurry and pointed with white cement and pigment in floors to match with colour of tiles, over 15mm thick screed bed in CM (1:6) including dismantling of existing tiles complete all as specified and directed.

M&L for Cement concrete in sub base, 1:4:8 type D2 using 40 mm graded stone aggregate complete all as specified and directed.

Demolition of brick work or stone masonary, built in cement mortar complete all as specified and directed.

M & L brick work with fly ash bricks built in CM 1:6 straight or curved on plan exc 6 mtr mean radius complete all as specified and directed.

M & L PCC (1:2:4), type B0 (using 12.5 mm graded stone aggregate) as in surface channels and drains, finished even and smooth complete all as specified & directed.

Demolition of cement concrete of any description in any position (Reinforced) complete all as specified and directed.

M&L precast cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) in cover slabs (for drains / manholes etc.), shelves and similar articles with plain faces complete with joints to match set in cement mortar 1:6 complete all as specified and directed. Note: The rate quoted is deemed to be inclusive of Cost of form work.

S&F Mild steel TMT bars 6 to 8 dia, cut to length, bent to shape required, inlcuding cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, inlcuding cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Excavation in trenches n.exc 1.50m wide and n.exc. 1.50 m depth and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches n.exc 1.50m wide and depth exc. 1.50 m but n. exc 3 m and getting out in hard/dense soil complete all as specified and directed.

M & L Reinforced cement concrete pipes, 150mm bore, class NP2, conforming to IS 458, laid and jointed complete with collars laid in trenches including taking down existing pipe, complete all as specified and directed.

M & L Reinforced cement concrete pipes, 200mm bore, class NP2, conforming to IS 458, laid and jointed with collars laid in trenches including taking down existing pipe etc., complete all as specified and directed.

M & L Plain cement concrete (1:3:6) type C2 (40mm graded stone aggregate) as concrete bed to drain pipes of any dia including forming cradles complete all as specified and directed

Cutting holes into or through brick walls built in cement mortar for removing/refixing PVC/CI fittings and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, superficial area n exc 150 sq cm each complete all as specified and directed.

Returning, filling in incl spreading, leveling, watering and well ramming in layers n. exc 25 cm complete all as specified and directed.

Removing excavated materials n'exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point in soils complete all as specified and directed.

M & L PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M & L PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) set in CM 1:4 as in benching to manholes complete all as specified and directed.

M & L PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in copping incl necessary form work complete all as specified and directed.

S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to walls, bore of pipe in 110 mm, etc complete all as specifed and directed.

S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to walls, bore of pipe in 75 mm, etc complete all as specifed and directed.

M&L PVC (SWR) bends with access door any radius 110 mm dia, complete all as specified and directed.

M&L PVC (SWR) bends with access door any radius 75 mm dia, complete all as specified and directed.

M&L PVC (SWR) branch piece, single (single Y) equal or unequal any radious, 110 mm dia, complete all as specified and directed.

M&L PVC (SWR) junction single, (Single T) equal or unequal any radious, 110 mm dia, complete all as specified and directed.

Dismantling Asbestos cement sheet (Corrugated/Semi-corrugated etc.) in roof covering complete all as specified and directed.

M&L for 6 mm thick Non-Asbestos cement fibre corrugated sheet in roof, fixed with J or L hook or cranked bolt with washers complete all as specified and directed.

Fixing only 6 mm thick Asbestos cement corrugated sheet in roof, fixed with J or L hook or cranked bolt with washers complete all as specified and directed.

S & F 6 mm thick Non - Asbestos cement fibre two pieces adjustable serrated ridge fixed with J or L hook or cranked bolt with washers complete all as specified and directed.

S&F for 110 mm PVC (SWR) pipes single socket length fixed as spouts on roof including cutting holes in brickwork/stone masory/concrete surface and making good with rich cement mortar and sealed with bitumen complete all as specified and directed.

Disconnecting existing tanks of capacity exc 250 ltr & n exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc complete all as specified and directed.

Disconnecting existing tanks of capacity exc 500 ltr & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc complete all as specified and directed.

Demolition of cement concrete on roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work etc complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof padding complete all as specified and directed.

Cutting out V - grooves in plaster / masonary and inserting the waterproffing membrane and making good in CM 1:3 complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm laid over primed surface including bitumnious primer conforming to IS -3384 applied @ 0.3 ltrs/sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame, including rendering 10mm thick in cm 1:4 on concrete surfaces of roofs, parapet etc. finishing to surfaces even and smooth without using extra cement and provinding necessary slope with using WPC @ 3% by weight of cement complete incl taking down existing froof treatment and cement plaster of any description, roughing, preparing the surface by cleaning the surface with wire brushing scrubbinbg down with water to receive new treatment complete all as specified and directed.

Dismantling timber scantlings 40 Sq cm and over in section in any position in framed work complete all as specified and directed.

M & L for 2nd class hard wood, clean sawn, in scantiling timber fixed with nails complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/slabs/blankets any thickness, incl cover filltets and grids and S & F in true horizontal level false ceiling system, The snap grid shall be of hot dipped galavnised steel sections exposed suface with precoated capping, main tee of size 24x32mm at every 1200mm c/c and cross tee of size 24x27mm (1200mm & 600mm long) at every 600mm c/c and wall angle of size 19x19mm fixed to perimetere wall, as per manufacturer's instructions, grid to be suspended at every 1200mm c/c in both directions by using 3mm dia pre-straightened GI wire at every 1200mm interval at the main tee supported from existing RCC slab fixed with Metal dash fastener including provision of 4mm thick white colour textured designer cement ceiling board (V board) of size 595 x 595 mm fixed with screws/clips complete all as per manufactureres instructions and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each complete all as specified and directed.

M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints and making good the surfaces complete all as specified and directed.

S & F in repairs 2nd class hardwood exc 13 & n exc 25 sqcm plain fillets.'square,rectangular or triangular insection, clean sawn, secured with nails or brads complete all as specified and directed

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size 25x3MM MS flat; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate in bed block for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and directed.

S & F Window guard bars, plain, let in and fixed independently in wodden frames, L or T section section supports for shelves etc. and similar articles conforming to Fe 290-0 or Gde E-165 including making hole on wooden frame to insert guard bars complete all as specified and directed.

M&L 2nd class hard wood plain framed factory made panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm thick particle board with commercial face veneers on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 35 mm thick IInd class hard wood factory made glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge, divided into squares ,edges of framing plain, chamfered or rounded, fitted with cut and miterd beads or rebated sash bars for securing glass or gauge etc. complete all as specified.

S & F 30 mm thick 2nd class hard wood factory made glazed and skeleton shutter of divided into square, with plain chamfered or rounded metred and rebital sash bar any number and framing moulded windows, ventila-tors, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.20 (b) fitted to chowkats complete all as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per manufacturer instruction complete all as specified and directed.

S & F factory made solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC 'C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as per manufacture instruction complete all as specified and directed.

S & F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as specified and directed.

S & F 100 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200 mm etc complete all as spfd and directed.

S & F 150 mm length of extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F for Extruded aluminium alloy handles, fabricated type,anodised, Size of handle in 100 mm,etc complete all as specified and directed.

S & F for Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc complete all as specified and directed.

S & F for Aluminium wire type I, Gate and shutter, hooks and eyes 150 mm etc complete all as specified and directed.

S & F MS Butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.

S & F in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate (short type, fighter jet aeroplane shape type) complete all as specified and directed.

S & F MS Butt hinges medium weight cold rolled of size 75mm complete all as specified and directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.00 mm & fixed with stainless steel wire staples fixed complete all as specified and directed.

M & L preparation of surfaces of wood based material description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed.

S & F 3mm thick figured glass, pin head type andd glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete.

S&F in repairs 140 mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

Taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water completely.

M&L rendering 15mm thick in CM 1:6 on fair faces of brick surfaces of walls finished the surfaces even & smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on fair faces of brick surfaces of walls finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L 5 mm thick rendering in CM 1:3 on surface of ceilings finished even and smooth w/o using extra cement complete all as specified and directed.

Preparing newly plastered surfaces and applying two coats of white wash on walls complete all as specified and directed.

Preparing newly plastered surfaces and applying two coats of colour wash on walls complete all as specified and directed.

Preparing newly plastered surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L non skid coloured ceramic tiles 7-8 mm thick (square/ rectanglar ) area of each tile exc 0.06 sqm but n'exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface,laid over and including 15mm thick screed bed or bedding in cement mortar (1:6), complete all as specified and directed.

M&L non skid coloured ceramic tiles 7-8 mm thick (square/ rectanglar ) area of each tile exc 0.11 sqm but n'exc 0.18 sqm in floors etc , set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface,laid over and including 15mm thick screed bed or bedding in cement mortar (1:6), complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 300X450X7mm thick set and and jointed in cement slurry and pointed with white or coloured cement to match , laid over and including 10mm thick rendering in cement mortar(1:4) as backing coat, complete all as specified and directed.

S & F in repair Vitreous China squatting pan , "Orrissa" pattern size 580 X 440 mm white with intgrel footrest (excluding flushing cistern & flush pipe) including 'P' or 'S' trap complete including provision of cement concrete complete all as specified and directed.

Supply and fixed PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs complete all as specified and directed.

Taking up or down for bore of pipes in 15 mm, steel tubing and connections, including cleaning for refixing or removal to store etc complete all as specified and directed.

Taking up or down for bore of pipes in 20 mm, steel tubing and connections, including cleaning for refixing or removal to store etc complete all as specified and directed.

Supplying and fixing 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling complete all as specified and directed.

Supplying and fixing 25 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling complete all as specified and directed.

M&L for Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20cm girth complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floors,approns laid , bedded and pointed any mortar etc complete all as specified and directed.

M&L Mirror Polished shahabad stone flooring with slab of thickness 20-25 mm,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over 20mm thick screed bed in CM 1:6 including grinding and polishing making smooth surface of floor complete all as specified and as directed.

M&L Polished shahabad stone slabs on skirting/dado of thickness 20-25 mm set & jointed in meat cement slurry and pointed in white or coloured cement to match the shade over 10 mm thick backing coat in CM 1:3, including grinding and polishing making smooth surface of floor complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top ) of 500 ltr capacity hoisted and fixed in position all as specified with dismantling of old unserviceable tank complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top )of 1000ltr capecity hoisted and fixed in position all as specified with dismantling of old unserviceable tank.

S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top )of 2000ltr capecity hoisted and fixed in position all as specified with dismantling of old unserviceable tank complete all as specified and directed.

S&F in repair mild steel 25mm dia,drapery curtain rods power coated, decorative type complete all as specified and directed.

S&F in repair mild steel, powder coated brackets, decorative type for 25mm dia curtain rods, complete all as specified and directed.

S & F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including cutting for & pinning in ends of brackets or erracting stand but exclusive of fixing of supply of waste pipe complete all as specified and directed.

S & F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fixed in repair 15 mm bore two way Bib taps fancy type cast copper alloy Chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fixed in repair 15 mm bore Bib taps fancy type cast copper alloy Chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15 mm dia Pillar taps fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs

S & F 15 mm dia Brass Stop valves/angle cock , cast copper alloy, fancy type,chromium plated, screwed down, high pressure, , screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.

S & F 15 mm dia Bib tap standard of PTMT any colour screwed for iron pipe (minimum weight 90 gms) as fixed in repairs complete all as specified and directed.

S & F 15 mm dia Stop valves of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms) as fixed in repairs complete all as specified and directed.

S&F in repair brass Chromium plated 125mm size shower roses with or without swivel joints, any size, including fixing to steel pipe or union, etc complete all as specified and directed.

S&F PVC waste pipe with complete fitting etc 32 mm dia complete all as specified and directed.

S & F PVC connection 15mm dia, 60 Cms long with brass ferrules on both ends fixed in repairs complete all as specified and directed.

S&F in repairs 15mm dia health faucet with 1.5 mtr tube & hook complete all as specified and directed.

S&F in repair 18/19mm thick Plywood, grade BWR, type BB, fixed with nails to timber frame work etc completed all as specified and as directed.

S&F in repair continuos (piano) hinges mild steel, bright finish or electro galvanised, width of traps (when open) in 30mm etc complete all as specified and as directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden/steel/aluminium frame or stone concrete or bricks surrounds glazed with putty or fixed with beads and removing from site complete all as directed.

S&F in repairs Vitrious China wash down water closet pan (Padestal Pattern) white (including 'P' or 'S' trap) with seat cover including connection to drain or (out going pipe and to flushing pipe anti Shyphonic pipe etc complete all as specified and as directed.

S&F in repairs plastic water closet seat cover, black/white, closed pattern with flat bottom & cover and MS Chromium plated or aluminium hinging device complete all as specified and as directed.

Demolition of cement concrete (unreinforced) on roofs, floors (otherthan ground floor) beams, staircases, landing, chajjas and similar suspended works and removing from site complete all as directed.

M&L for PCC 1:5:10, Type E-2 using 40mm graded aggregates in sunken floor filling and mass concrete complete all as specified and as directed.

(a) M&L 15mm thick rendering in CM (1:3) with WPC on fair faces of brick or concrete surfaces without using extra cement (b) A coat of bitumen VG-10 @ 1.2 Kg/Sqm over a coat of bitumen primer @ 0.70 Kg/Sqm (c) APP Modified pre-fabricated five layer water proofing membrene 3mm thick not less then 3.6 Kg/Sqm complete all as specified and as directed. Note: WPC will be measured and paid seperately

Supply only integral water proofing compound (BIS Marked)

M&L for 75mm PVC Nahani/floor trap pain with grating including jointing with solvent cement including removal of existing nahani/floor traps complete all as specified and as directed

S.R.M.K Enterprises (BID ID -3086932)

BUILDWEL (BID ID -3082332)

C H P CONSTRUCTIONS (BID ID -3093858)

NEWS CONSTRUCTIONS (BID ID -3094527)

VACON INFRASTRUCTURES (BID ID -3084273)