PROVN OF ROAD FURNITURE AND FENCING AT ICGS RATNAGIRI

Amount

Road Furniture & Fencing

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out soft/disintegrated rock all as specified and directed.

Surface dressing not exceeding 15 cm deep in hard/ dense soil all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan not exceeding 1.5 m depth and getting out soft/disintegrated rock all as specified and directed.

M&L excavating in post holes (or similar holes) in soft/disintegrated rock each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm all as specified and directed.

Labour only for Spreading and levelling in layers not exceeding 25 cm thick and for well ramming including watering as required.

Removing excavated material rock not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed.

M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/disintegrated rock all as specified and directed.

M&L hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 100 mm thick, watered and rammed to a true surface with broken stone or boulders all as specified and directed.

M&L for 50mm sand cushioning under floor or in foundation including watering and consolidation all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement no pigment all as specified and directed.

M&L Precast curb stone type B1 1:2:4 set in CM 1:4 all as specified and directed.

M&L cement concrete in foundations, Filling and mass concrete Type D2, 1:4:8 (40mm graded aggregated) all as specified and directed.

M&L cement concrete type C2 1:3:6 (40mm aggregate) in foundations filling and mass concrete as directed by Engg in charge.

M&L for 75 mm thick PCC 1:4:8 Type D2 as in sub base using 40 mm graded stone aggregate all as specified and directed.

M&L for PCC 1:2:4 Type B1 using 20 mm graded stone aggregate 40 mm thick as in floor finishing and finish the surface even and smooth without using extra cement all as specified and directed.

M&L walling of squared rubble, using locally found machine cut laterite stone, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed

M&L for stainless steel round pipes of grade 304, any dia up to 150 mm dia for road furniture including cutting to size, erecting in position and welding/ brazing all as specified and directed

S&F rolled mild steel Joist, channel, angle, or square sections, as in framed work, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) GDE Fe 410-0W(Gde E-250) quality A all as specified and directed.

S&F mild steel angle for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets including necessary drilling, bolting or riveting, and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

M&L for 5 to 10mm Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers 3mm thick and one hexagonal or square nut, not exceeding 100mm long dia of shank 5 to 10 mm all as specified and directed.

S & F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete of Fe 410 W (Gde E-250) quality- A all as specified and directed.

S&F Rolled mild steel Plates (plain or chequered) channels. Square cut or notched (ordinary & counter sunk) forming holes, without any attachment GDE Fe410-0 or Fe 310-O all as specified and directed.

M&L 10mm dia and over round bar Fe-410W quality A or Fe 290 incl. cutting bending for hooping and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Supply and fixed aluminium composited panel (ACP) AL 33D sheet 3 mm panel with 0.3 mm aluminium coil thickness aluminium alloy being AA3105 for exterior application sign board fixed on MS frame work by riveting of bolts and nuts at 300mm centre to centre all along the periphery all as specified and directed.

M&L for rendering 15 mm thick plastering in CM1:6 on fair faces of laterite stone masonary all as specified and directed.

M & L for Rendering 15mm thick on fair faces of brick work or concrete surfaces with CM 1:4 finished even & smooth without using extra cement in cement plaster all as specified and directed.

M&L for preparation of surfaces and applying two coats of cement base paint, over a coat of exterior wall primer in beadings of external wall surfaces all as specified and directed.

M&L for preparing new plaster surfaces of wall of any description applying two coat of water proof acrylic emulsion antifungal (Exterior grade) paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plaster surface of wall and applying three coats of white wash complete all as specified and directed

M&L applying two of synthetic enamel paint on steel and iron surface of any description not otherwise described over 10 cm width or girth including preparation of new surface and applying one coat of red oxide/ zinc chrome primer all as specified and directed.

Supply and fixed print with 3mtr Ratio reflective film and UV eco print by pressure sensitive adhesive backing on aluminium composite panel for sign board printing image as approved all as specified and directed.

M&L supplying and Stacking of good soil well sieved 90% to pass through IS sieve of 10 mm size free from stone rubbish like lumps, stones, roots and other foreign material suitable for gardening. The soil shall be fresh from quarry. The colour of the soil generally red including cost of all royalty and carriages, all tool, plants, taxes octoi etc all completed as specified, directed and approved by Engr-in-charges

Supply only at site dump manure well decayed, well dried well powdered without clods and free from stones dried grass and other rubbed materials. The colour of manure shall be black. The manure screened through sieve at 1.5 designation 4.75 micron including carriage at site all as specified and directed Note : for the purpose of measurement, stack measurement shall be reduced by 8% for voids

Labour only for mixing soil manure in proportion of 2:1 including watering spreading and levelling and watering etc. complete all as specified, required thickness and as directed.

M&L preparation of ground for planting carpet lawn grass and rooting rank vegetation and weeds and removing it and grassing with carpet lawn grass including watering. Supplying good soil suitable for lawn if needed (The good soil shall be paid for separately) all as specified and directed.

S&F Solar cat eyes on road surface all as specified and directed

S&F concrete benches all as specified and directed

S & F PVC coated chain link fencing of overall thickness 5.0 mm with GI wire 3mm dia in mesh of size 75mm x 75 mm including line wires straining bolts, binding wire etc. and fixed complete to the posts all as specified and directed.

S & F butt hinges of size 100 mm, Mild steel all as specified & as directed.

S&F for MS Pipe of Square/round shape Steel work in tubular trusses including special shaped washer, cleats etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

m/s Pravin s Bhosale

VAIBHAV ANIL ADHAV

shrilaxminarayan constructions