Constt. of one room in health and wellness center/sub-center at logate including gulometer and HP testing machine,BP Operating including chair/benches, admin bed, repair and ren. Of old rooms and inverter.

Amount

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth,1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly edge, disposed excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in :

Providing and laying in position cement concrete of Mix 1:5:10 excl the cost of centring & shuttering- All work upto plinth level.

Providing and laying in position cement concrete of Mix 1:3:6 excl the cost of centring & shuttering- All work upto plinth level.

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and laying in position reinforced cement concrete of mix M20 excluding the cost of centering.shuttering, finishing and reinforcement-All work upto plinth level.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding complete.

Centering and Shuttering including strutting, propping etc and removal of form for Foundations: footings, bases of columns etc. for mass concrete.

Walls ( Any Thickness)

Suspended floors, roofs, landings, balconies and access platforms.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Edge of Slabs

12mm Cement Plaster of 1:4 mix : (Outer)

15mm Cement Plaster of 1:4 mix : (Inner)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Making plinth protection with common burnt clay bricks of class designation 7.5 laid on edge in cement mortar 1:6 (1 cement : 6 coarse sand) with 12 mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) over 75 mm bed of dry brick aggregate 40mm nominal size rammed, consolidated and grouted with fine sand. The top of bricks pointed with cement mortar 1:3 (1cement: 3 fine sand) and curing complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete - Size of tile 600x600 mm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size wnecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).

12 mm thick plain grade-I, medium density flat pressed three layerparticle board FPT-I

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (Second class deodar wood 35mm)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : (Second class deodar wood 35mm)

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: Second class deodar wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 300x10 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125mm

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Rubber stopper

Providing and fixing bright finished brass hard drawn hooks and eyes

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. - 2mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over & including priming coat with water thinnable cement primer

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. - Two or more coats on new work

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. - (i) Single socketed pipes

Un-plasticized PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes - 110mm bend

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (GROUP B)

Wiring for light/power plug for 15 A with 2 x 4 sq.mm. FRPVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 x 4 sq. mm.FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required - (2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate required. switch box including connections but excluding modular plate etc. as

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required

Providing and fixing M.V. danger notice plate of 200mm x 150mm , made of mild steel, at least 2 mm thickin single red colour on front side as required. - (6 way (4 + 18), Double door)

Supply of LED batten 18W

Supply of Exhaust fanWall / Ceiling Fans 230V 50Hz celing fan with double ball bearing with low power consumption of following sweeps

Supply & fixing 25mm square core aluminium cable as req.

Add cost of Sign board -

DALBIR SINGH GOVT CONTRACTOR

SURIL JASROTIA GOVT CONTRACTOR