Construction of new Anganwadi building at Thittavilai in Thirparappu Town Panchayat.

Amount

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc complete complying with SS20B. TNDSS No:23&24

Cement concrete of mix 1:4:8 (one part of cement four part of sand and eight part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:28

Collection, filling with conveyed gravel in layer of not more than 15 cm thick an average lead of 5km, including watering with all layers and consolidation complying with standard specification including cost and conveyance of sand at site and all labour charges and all other incidental charges etc., complete as per Standard Specification. TNDSS No:301&305

Random rubble masonry in cement mortar 1:5 mix (one part of cement and five part of sand) using new best rough and bond stones from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc complete complying with standard specifications.

Brick work in cement mortar 1:5 (one part of cement five part of sand) using country bricks of size 8¾"x4¼"x2¾" including curing, cost and conveyance of all materials to site and all labour charges etc complete as per standard specification

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29 m height for plain surfaces such as RCC slabs rectangular beams Tee or L beams lintels, stair case beam etc. in all floors with all cross bracing using mild steel sheets of size 90x60 cm and BG10 gauge stiffended with welded mild steel angles of size 25x25x3 mm for boarding laid over silver oak country wood joists of size 10x6.5 cm spaced at about 90 cm center to center and supported with casurina props of 10 cm to 13 cm Ø spaced at 75 cm center to center etc. complete complying with standard specification in all floors.

Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or ribbed tar steel rods, for all RCC works as per the design given by the departmental officers including cost of steel cutting, bending, placing in position and binding with binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete. TNDSS No:97

Reinforcement Cement concrete 1:1½:3 (one part of cement one and a half part of sand and three part of aggregates) using machine broken granite jelly of 20 mm size for all reinforced cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. TNDSS No:30

Paving floor with vitrified tiles (marbonite) in all floors over the base layer of cement mortar 1:3 (one par of cement three part of sand) 20 mm thick pointed with white cement at 0/40 kg/m2 including finishing the joints etc complete, as directed by the departmental officers (The rate should be exclusive of cost of flooring concrete 1:5) special.

Dadooing the walls with plain glazed tiles of 150 x 150 x 6 mm set in cement mortar 1:2 (one part of cement two part of sand) 12 mm and pointing white cement used 4kg/m2 neatly etc complete as directed.

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (one part of cement, two part of sand and four part of aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for paneling wherever necessary and as directed by the departmental officers)

Ceiling plastering and finishing all RCC exposed surface such as RCC slabs, sunshade canopies, stair case steps, landing slab, etc. with cement mortar 1:3 (one part of cement three part of sand) 10 mm thick including packing the surface and provided necessary cement mortar nosing, headings as per the size specification wherever necessary using the same mix as directed by the departmental officers etc. complete complying with standard specification.

Plastering walls with cement mortar 1:4 (one part of cement four part of sand) 12 mm thick including all cost and conveyance of all materials and all labour charges etc. complete as per standard specification. TNDSS No:61

Supplying and fixing fine polished cuddapah slab of 50 mm thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as directed by the departmental officers.

Supply and fixing in position best quality of approved make Indian oriya Water closet of size 580 x 440 mm with all accessories such as 'P' trap or 'S' trap confirming to IS 2556 part XII with sand cusion and forming flooring alround the closet using 40 mm leveling course 1:4:8 - 100 mm thick and finishing the top to the required slope and including necessary internal connection and outlet connection and making the disturbed potion to original condition without leakage etc including Labour charges for fixing etc complete.

Supplying and fixing of steel door, window and ventilator with suitable design including cost of materials, welding and conveyance of all materials to site locking arrangements and painting one coat of primer etc. complete as per standard specifications including fixing charges etc. complete for the work.

Casting and fixing terrracota Jolly of RCC 1:1½:3 (One part of cement one and half part of sand and three part of aggregates) including all materials, labour charges, form work curing charges etc complete.

Providing and fixing in position of P.V.C rain water down fall 110 mm Ø pipe with necessary shoes bends other specials clamps screw nails teak wood plug including of all materials etc. complete as per standard specification.

Supplying and fixing best variety and approved quality of PVC ventilating shaft of 110 mm dia and 3 m height, including cost of 110 mm dia PVC cowl of conical type and fixing in position as directed by departmental officers.

Painting two coats with ready mixed plastic emulsion paints of first class quality and of approved colour over a priming coat including through scraping clean removal of dirt etc, complete and including cost of necessary plaster of paris, putty, brushes, wherever required and all labour charges, scaffolding charges etc., complete as per standard specification.

Painting two coats for Black Board surface using best quality synthetic enamel paint etc complete complying with standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc complete complying with standard specification. (The make, quality and colour of paint should be got approved by the departmental officers before use on works.)

Supply and fixing of TNEB Meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V), 32A Neutral link and earth link (1inch x 1/8inch Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1inch thick on either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD 127.

Supply and run of 2 of 6 Sq.mm (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD 66.

Supply and run of 2 of 6 Sq.mm (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm Ø GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains SD 71.

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch in flush with wall, covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point for electronic regulator. (Assume 5 Points Per Coil) (SD-22)

Wiring with 2x 1.5sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mmx 100mm x 75mm MS switch box for 5A 3 pin non interlocking flush type CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open plug point. (SD-10)

Supply and fixing of WT bulk head fitting with guard suitable for 15W LED bulb SD 83.

Supply and delivery of 20W 4 feet LED fitting with LED (M-1275)

Supply and fixing of 1200 mm (48inch) sweep AC ceiling fan complete with stepped electronic 300W regulator with 1meter down rod on the existing clamp SD 107.

Supply and fixing of stainless steel sink (600 x 450 x 200 mm) with best stainless steel sink of approved brand and quality, including cost of all materials and labour charges etc complete as per standard specifications.

Special design art work with first class quality enamel paint including wall putty, priming coat etc complete and all other incidential charges if any as per standard specification.

Supply and delivery of fixing of HDPE tank 1000 litres capacity as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of GI pipes and specials for pipe connection works including cutting, threading and fixing chargers as directed by officers.