Repairing/maintenance of Sharda Colony substation including maintenance of 11KV GOS watering arrangement and repairing of iron net around substation in r/o SDOCM

Amount

Supply of PCC pole

Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete(1:3:6)layer on top with including excavation and refilling etc as required.Above 8.0 metre and upto 11.0 metre

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required 3 span x 4 wire x 40mtr=480 x 0.214

GI wire 8 SWG + Erection of 8SWG GI wire as required 3 span x 4 wire x 40 mtr=480 x 0.103

Suppy of Gang operating switch

Fitting and fixing of Gang operating switch

Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc 25mm dia nominal bore

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 15 x 1.5 x both side x 2 45 sqm 12 x 1.5 x both side x 2 =36 sqm

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5KA and complete with galvanised clamping arrangement,G.I. bolts, nuts, washers etc. as required.

Making of chemical earthpit

Clamp

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of1m above ground level and removal of rubbish upto a distance of50 m outside the periphery of the area cleared.

Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted) 15x 2.5 x 2.5 x 2 x 0.0283

Supplying and erection of stay set complete (galvanized) with 19/ 20 mm dia X 1.8 meters long stay rod, anchor plate of size 45 cm X45cmX7.5mm,thimble,stayclamps,turnbuckle(20mmX60cm),7/4.00 mm dia G.I.stay wire and strain insulator etc incement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

MS Angle 50 x 50 x 6 50' x 0.3048=15.24mtr 15.24 mtr x 4.50kg/m=68.58kg

Total impact of GST for the purpose of CTC

M/s Sanjay Supplier

M/s Saloni Sales