Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.3 LAccepted-AOC VILL TUTNYU PO PS LAZU KHONSA DISTRICT TIRAP PIN 792130 ARUNACHAL PRADESH | KHONSA | TIRAP | ARUNACHAL PRADESH | 792130 | L1 | Accepted-AOC Due to L1 bidder | |
| 2 | L2₹22.1 L+₹1.7 L (8.13%)Rejected-Finance | L2 | Rejected-Finance Due to higher rates | |
| 3 | L3₹22.5 L+₹2.0 L (10.0%)Rejected-Finance | L3 | Rejected-Finance Due to higher rates |
Tender Value
₹19.9 L
EMD Value
₹39,800
Closing Date
14 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
ADDN/ALTN AND IMPROVEMENT OF BLDG NO.T-3 ,TOILET AND PROVN OF SEPTIC TANK AT P-7C AND POWER SUPPLY TO MACHINERY IN 381 AND PROVN OF PATH WAY NEAR COOK HOUSE BLDG NO.T-8/9A AT MIL STN LEKHAPANI
2022_MES_545766_2
8686/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (i)
4 documents required · 4 mandatory
₹500
GE LEKHAPANI
₹39,800
Yes
19 Nov 2022
22 Sept 2022
19 Oct 2022
22 Sept 2022
14 Oct 2022
30 Sept 2022
Amount
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundations,laying cables,pipe lines,manholes,etc and getting out soft /loose soil complete all as specified and directed.
Excavating over areas, n exc 1.5m deep and getting out in soft / loose soil complete all as specified and directed.
All as per item No.2 above but depth exc 1.5m deep but n. exc 3 mtrs and getting out complete all as specified and directed
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm of soft loose soil complete all as specified and directed..
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M&L PCC (1:4:8 ) type D2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M&L Providing RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in foundations, including rafts,footings,foundation beams,plinth beams; comlpete all as specified and directed.
M&L Providing RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in slabs of septic tank, soak well etc supported on walls beams and columns in floors, roofs, landings, balconies, canopies, deck slabs & in shelves and the like etc complete all as specified and directed
M&L Providing RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in cover slabs for manholes, etc and set in cement mortar 1:4 with plain fair faces incl chamfered, weathering, throating etc incl necessary use and waste of form work complete all as specified and directed
M&L Providing RCC, M-25 (Design Mix), (using 20mm graded stone aggregate) as in beams, cantilevers, bressumers,lintel bands any span etc.complete including necessary use and waste of form work complete all as specified and directed.
M&L Providing RCC M-25 (Disign Mix),(using 20mm graded stone aggregate) as in lintels etc, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets including necessary formwork complete all as specified and directed.
Use and waste of formwork to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
Use and waste of formwork with rough finished flat concrete faces as soffits of suspended slab such as roof slabs, floor slabs, landing & similar work complete all as specified and directed
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified and directed.
M & L Brick work with subclass “B” Old size bricks, straight or curved on plan,exceeding 6 m mean radius, built in CM (1:6) complete all as specified and directed.
All as per Item No 15 above but except bricks, complete all as specified and directed
M&L Brick work with sub class old size 'B' bricks, straight or curved on plan to any radius, built in CM (1:4) as in half brick thick walls complete as specified and directed.
M&L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM (1:6) complete all as specified and directed
M&L for loose filling with broken brick aggregates of gauge 80 to 150mm in soakage pit, soak well etc complete all as specified and directed
Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5sqm each and making good to disturbed surfaces and removing from site of work complete all as specified and as directed by the Engineer-in-Charge.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5sqm but not exceeding 4.0sqm each and making good to disturbed surfaces and removing unserviceable materials from site of work complete all as specified and directed by the Engineer-in-Charge.
S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per directions of Engineer-in-charge.
S&F Aluminium powder coated door shutter single / double leaf, side hung type on floor door spring (to be paid sepratly) 44.45mm wide (two panels) fabricated having hanging and meeting style 85.00 mm X 44.45 mm X 1.8mm thick, top rail 83.50 mm X44.45 x 1.62 mm thick, middle rail 83mmx44.45mmx1.70mm thick and bottom rail 95.25mm X 44.45mm X 1.70 mm thick and including jointing cleats, aluminium anodised snap beading, screws, aluminium anodised fitting such as pair of 'D' type handle 250mm long (decorative type), tower bolts 150 mm long 1 Nos for each leaf, aluminium beading, PVC packing, locking arrangement with mort ice lock 6 lever, 1Nos floor door stopper, and necessary fitting & fixtures complete all as specified and directed by Engr - In - Charge.
S&F Powder coated aluminium grill ( anodises transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including citting the grill to proper opening size for fixing and operation of handles and fixing approved anodised as per requirment and direction of enginner incharge ( Only weight of grill to be measured for payment).
S&F for aluminium powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.30mm (section No 20621) bottom of size 92 x 31.75 x 1.30mm (section No 20620) and shutter top and bottom of size 92 x 31.75 x 1.30mm (section No 20846) and lock side shutter frame of size 40 x 18 x 1.29mm (section No 20845) and lock side shutter frame of size 40 x 18 x 1.29mm (Secvtion 20845) with rubber gasket, beading and locking arrangement with and including stainless steel wire mesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 4mm thick glass with necessary rubber beading gasket etc complete all as specified and diercted by Eng -in-Charge.
S&F Inter locking metal grid (snap grid for false ceiling) of size 605mm x 605mm in true horizonatal level, hot dipped galvanised steel sections consisting of main “T” runner with suitably spaced joints to get required length and size 24mm x 38mm made from 0.30mm thick (Min) sheet spaced at 1200mm centre to centre and cross “T” of size 24mm x 28mm made of 0.30mm thick (Min) sheet, 1200mm long spaced between main “T” at 600mm centre to centre to form a grid of 1200mm x 600mm and secondary cross “T” of length 600mm and size 24mm x 28mm made of 0.30mm thick (Min) sheet to be interlocked at middle of the 1200mm x 600mm panel to form grids of 600mm x 600mm and wall angle of size 24mm x 24mm x 0.4mm. Main “T” runner to be suspended from ceiling /truss/purlis using 2 to 3mm GI wire, 1200mm x 600mm centre to centre all complete for all heights as per specifications and as directed by Engineer – in - Charge.
S&F 4mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation and acoustic purpose to be placed in the grid system , with provision of light fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detector etc. complete all as per manufacturer instructions and directed by Eng-in-charge.
S&F curtain rod 25 mm dia MS powder coated or PVC sheathed , with and including PVC decorative round finials on either end provide a visually balanced appearance including MS powder coated brackets fixed to wall with 30 mm screws and PVC rawl plug, anchors, etc complete as directed by Eng-in-charge.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed and directed by Eng-in-charge.
Dismantling of plain or corrugated steel sheeting any guage, thickness including Nanital or similar pattern roof coverings complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position and directed by Eng-in-charge.
Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing and directed by Eng-in-charge.
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed..
All as per Item No.33 above but 6 mm to 8 mm dia complete all as specified and as directed.
All as per Item No.33 above but, 8 to 10 mm dia as in stirrups,binders,etc complete all as specified and directed.
S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-310 complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed..
S&F Rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.
S & F Steel work of in hollow rectangular or square tubular trusses incl special shaped washer etc complete using ERW or HRW welded conforming to IS - 4923 (Yst-310)Complete all as seified and direted
M&L Pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L Hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing debris to the premises complete all as directed by Eng-in-charge.
M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.
M&L Coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed.
M&L Coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm as in vertical surfaces such as skirting,dado etc etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.
M&L Coloured non skid joint free ceramic outdoor tiles of 9mm to 10 mm thick of size 300X300mm each tile in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified anddirected.
M&L Glazed coloured ceramic tiles of size 300x450x6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles as in vertical surfaces such as skirting,dado,etc laid over and including 10 mm thick rendering as in backing wall plaster in CM (1:4) complete all as specified and directed.
M&L 50 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 complete as specified and directed.
M & L Chequered cement concrete tiles of size 25cm x 25cm x 22mm thick,cast in rubber moulded glossy finish of approved colour general purpose double layer with mixture of white and grey cement in equal proportions and pigments set and jointed and pointed in neat cement slurry in floor incl layer over 15 mm thick bedding of CM (1:6) complete all as specified and as directed
M&L 50mm thick,PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in floors finishing even and smooth without using extra cement complete all as specified and directed.
Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.
M&L Providing PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges and other similar bands including necessary formwork complete all as specified and directed.
M&L for Granite (of any type) work (table rubbed and polished) 16 to 18mm thick in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
M&L Rendering 10.mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified and directed.
M&L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces including finishing fair and even all as specified and directed.
M&L Prepration of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L Prepration of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer with and including 1to 2mm thick exterior wall putty complete all as specified anddirected.
M&L Preparation of old painted or plastered surfaces of walls etc by washing, rubbing down and applying one coat of cement base paint complete all as specified and directed.
M&L Preparation of newly plastered surfaces on walls and applying two coats of distemper oil emulsion over a coat of primer over and incuding applying 1 to 2mm thick wall care putty complete all as specified and as directed.
M&L Preparation of new or previously un treated steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F GI pipes 15mm dia (medium grade) galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F GI pipes 20mm dia (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F Fancy type15 mm dia Bib taps, long body, cast copper alloy, chromium plated screwed down to iron pipe or for brass ferrule & fixed complete all as specified and directed.
S&F Swan neck, fancy type15 mm dia pillar taps, cast copper alloy with capstan heads, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipe & fixed complete all as specified and directed.
S&F Wash basins white, vitreous China, flat back, size 580x450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed to wall complete all as specified and directed.
S&F 15mm bore dia stop valves / angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.
M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair 32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) fixed complete all as specified and as directed.
S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed to walls as complete all as specified and as directed.
S&F PVC (SWR) vent cowl 75mm fore fixed with pipe complete all as specified and as directed.
S&F PVC (SWR) pipes 150mm dia single socketed, in any length with rubber ring joints, fixed to walls as complete all as specified and as directed.
S&F PVC (SWR) pipes 200 mm dia single socketed, in any length with rubber ring joints, fixed to walls as complete all as specified and as directed.
Taking down copper/aluminium point wiring, (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etccomplete all as directed by Eng-in-charge.
M & L Surface point wiring complete with 2x1.5 sq mm FRLSH, PVC insulated multi standard copper conductor single core cable 1100 volts grade (Red/Yellow/Blue colour), drawn into non metalic PVC Casing/caping medium grade of suitable size and fixing accessories, fixed on wall/ roof etc, and including provn of PVC insulated 1.5 sq mm FRLSH (Green colour) copper conductor for each continuity and connected to common earth dolly and PVC terminal boxes fixed on wall for housing the switches socket,outlet etc.,for one light point controled by one one way 5 Amp switch complete all as specified and directed by Engineer-in-Charge. Note :- Cost of PVC casing/caping, making good disturbed wall surfaces, matching with existing shade/pink of the painted surface are deemed to be included in the quoted rate.
All as per Item No.75 above,but one fan point controlled by one , one way 5 Amp switch
All as per Item No.75 above,but one 5 pin socket outlet 05 Amp on independent board .
All as per Item No.75 above,but one 5 pin socket outlet 05 Amp on same board with other switches
M&L Providing point wiring for 3/6 pin,15/16 Amps switch socket outlet controlled by one, one way switch on independent board by using 2.50 sq.mm (nominal area), multistranded copper conductor cable IS-694, single core PVC insulated FRLSH unsheathed cable (Maintaining Colour Code) 1100 volts grade in and including non metallic rigid PVC casing/caping, 25mm dia including PVC accessories / fittings and fixtures and fixed on surfaces of wall/RCC ceiling by using gutties etc.as per actual requirement as per site,with and including new PVC board/PVC terminal box of adequate size, with and including all accessories and using 1.5 sq.mm (nominal area), stranded copper conductor, single core PVC insulated FRLSH unsheathed cable green in colour as earth continuity conductor connected to common earth dolly and connecting upto fittings complete all as specified and directed.
S&F LED tube light fitting 4 ft. 1 x 18 watt with 230 volts, with bipin holder connector block, LED retrofit tube rod etc complete with all accessories internally pre-wired and fixed to walls/ceiling with screw on round PVC blocks including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&F Fan regulators electronic stepped type complete all as specified and directed.
S&F Switch piano flush type, 6 amps, 230V AC,single pole, one way all as specified and directed..
S&F Switch socket combination multipurpose suitable for 2 pin and 3 pin 6 amp flush type all as specified and directed.
S&F Switch socket combination multipurpose suitable for 2 in 1 , 3 pin 5 & 15 amps flush type all as specified and directed.
S&F Socket outlet type 2 in 1 3/5 pin 5 Amps with other switches all as specified and directed..
S&F Ceiling rose, 3 terminals, surface bakelite,PVC/Polycarbonate complete all as specified and directed.
S&F MCB Triple pole and neutral (TP&N) 6 to 32 Amp 240 volts 10 KA 'C' series with all incoming/outgoing connections with proper size lugs including taking down old unserviceable one complete all as specified and directed.
S&F MCB single pole and neutral (SP&N) 6 to 32 Amp 240 volts 10 KA 'C' series with all incoming/outgoing connections with proper size lugs including taking down old unserviceable one complete all as specified and directed.
S&F MCB single pole (SP) 6 to 32 Amp 240 Volts 10 KA 'B' series with all incoming/outgoing connection with proper size lugs including taking down old unserviceable complete all as specified and directed.
S&F Single pole and neutral DB wall mounting type,240 Volts,8 Way with 200 Amps rated bus bar,double door suitable for fixing MCB's including connecting etc and taking down un serviceable DB ,main switch all as specified and directed.
S&F LED street light fitting 36 Watt, 230 V AC outdoor type with high pressure die, cast aluminum hosing and heat resistant complete with driver, lamp bracket for mounting on wall with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and connection,complete all as specified and directed.
S&F Exhaust fan of size 300 mm sweep,steel body, AC single Phase. 230V with blades and frame and louvers including provn of hole of 300mm dia, circular in shape in wall with fixing accessories and connection complete all as specified and directed.
Supply,laying and testing of LT XLPE under ground cable, size 3.5 core x 35 sqmm, armoured, heavy duty , XLPE insulated and PVC sheathed, 1100 volts grade with aluminium conductors, multistranded, ISI marked including suitable cable lugs, cable gland, jointing materials etclaying in trenches, ducts, on floor/wall complete all as specified and directed.
Supply and spread sand for sand cushioning of cables in trenches all as specified in MES Schedule Part-I complete all as specified and directed. Note: For the purpose of payment Punned thickness shall only be measured and paid.
S&F 50 mm bore GI tube (light grade) with all fittings laying in trenches/ passing through the culvert/road complete all as specified and directed.
Supply and laying old size brick, size 230x115x75mm burnt clay building brick sub class (B) for protecting LT U/G cable complete all as specified and directed.
S&F Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts with MCCB 100 Amps as incomer 4 way triple pole and neutral link complete all as directed by Engineer-in-Charge.
M&L Sub main wiring with two single core 10.00 Sqmm (nominal area) PVC Insulated FRLSH unsheathed multi stranded copper conductor cable 1100 volts grade drawing through PVC casing-capping complete including 10 Sqmm PVC insulated unsheathed multi stranded FRLSH single core copper conductor cable for earth wire including taking down/removing old one and making good distrubed surfaces of walls, floors, etc complete all as specified and directed. Note : (i) Three runs of cable 10.00 Sqmm and one run of PVC casing caping shall be measured as one run length (ii) Extra length of cable required for connection to DBs/MCBs shall deem to be included in unit rate quoted by contractor against the item. (iii) Earth wire run inside the casing capping.
M&L Earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point and to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate and 15 mm dia GI pipe (light grade) for earth lead protection pipe for suitable length and GI pipe 20 mm dia (light grade) for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 (using 20 mm graded stone aggregate) for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 (using 20 mm graded stone aggregate) with 3 Nos 8 mm dia TMT bars both ways,etc and testing on completion complete all as specified and directed by Engineer-in-Charge.
FEBI CONSTRUCTION
M/s AGAM CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .