Providing WSS to PC habitation in GP Dharot and Basal in Solan Constituency District Solan HP Sub Head Construction of protection work Construction of RCC intake Laying and jointing of GI pipes of various dia

Amount

Excavation in foundation trenches etc. upto all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing of pumping out water, blasting soft/ hard rock or chiseling soft/ hard where blasting is prohibited. In all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting, planking timbering and dewatering wherever required, stacking the useable and un-useable material/ soil separately and then returning the stacked soil in 15cm (fifteen centimeters) layers where required into plinths, sides of foundations etc. including consolidating of each deposited layer by ramming and watering and then desposing of all surplus excavated soil un- useable materials complete in all respect with in all leads & lifts as per direction of the Engineer-in-charge.

Excavation in drains and channel etc in earth work in all kinds of soil such as kankar, moorum shingles conglomerate saturated soil and decomposed soft and hard rock hard rock including including dressing of sides and beds, disposing of excavated earth with all leads, lifts disposed earth to be levelled and neatly dressed and then returning the stacked soil into foundation and trenches etc. including ramming and consolidating the same whereever required with all leads, lifts and including jungle clearance and as per the direction of Engineer-in-charge.

Wire crates of G.I. wire filled with boulders with square cut faces against the wire (wire crates to be measured and paid for separately) including entire carriage of material upto all leads and lifts as per direction of Engineer-in-charge.

Wire crates made of G.I. Wire filled with boulders with square cut faces against the wire (boulder filling to be measured and paid for separately) G.I. Wire 5mm thick corresponding to SWG-6 15cmx15cm mesh as per direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

Steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in RS joists, channels angles, tees and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

Angles

M.S. Flats.

Provding and laying cement concrete 1:4:8 (1 cement:4:sand :8graded stone agg. 40 mm nominal size) and curing complete exclunding the cost of form work in foundation and plinth including entire carriage of material upto all leads and lifts.

Providing and laying cement concrete 1:1.5:3 (1cement:1.5approved sand:3approved graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

Foundation and plinth including entire carriage of material upto all leads and lifts.

Wall (any thickness but not less than 0.1m thickness) attached pillasters,buttresses plinth and string courses etc. from top to foundation level upto floor two level and as per the direction of Engineer-in-charge.including entire carriage of material upto all leads and lifts.

Providing and laying cement concrete 1:6:12 (1cement:6sand:12graded stone aggregate 40mm nominal size and curing complete excluding cost of centering and shuttering in foundation and plinth including entire carriage of material upto all leads and lifts.

Providing and laying cement concrete 1:3:6 (1cement:3sand:6graded stone aggregate 20mm nominal size and curing complete excluding cost of form work in foundation and plinth including entire carriage of material upto all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish. Including centring, shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4mtrs and removal of the same for insitu reinforced concrete and plain concrete work in:-

Vertical surface such as wall of (any thickness) partition and the like including attached pillaster buttresses plinth and string courses and like and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

2nd class brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:6 (1cement:6sand) including entire carriage of material upto all leads and lifts complete in all respect.

Providing tor steel reinforcement for RCC work including bending, binding and placing in positon complete upto floor two level including entire carriage of material upto all leads & lifts.

15mm cement plaster in single coat in rough side of brick/stone masonery for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/ or rounded angles not exceeding 80mm in girth & finished even and smooth with cement mortar 1:6 (1cement: 6sand) including entire carriage of material upto all leads & lifts.

Providing & fixing of fencing panels of size 1.20mx1.80m of jali (Expended metal) 25mmx25mm mesh welded to M.S. black tube of 32mm dia of 14 gauge thick with M.S. flat cover 20mmx5mm M.S. hold made out of M.S. flat 32x5mm including cutting, welding, painting with red oxide paint complete in all respect and as per the entire satisfaction of the Engineer- in- Charge.

Laying, jointing, testing and commissioning in trenches galvanised mild steel tube of following dia (light grade) including providing and fixing tube fittings such as reducer increasers, sockets, union, tees, bends etc. where ever required (earth work in trenches to be measured and paid for separately) and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

20mm dia

25mm dia

32mm dia

80mm dia

Providing and fixing gun metal full way valve with wheel of following dia as per direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

20mm dia

25mm dia

80mm dia

Hira singh manta

Thakur Traders

R.K.Manhotra