Supplying, installation, testing and commissioning the Fire Fighting system in Agriculture building at Chambaghat Distt. Solan (H.P).

Amount

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class‐ 'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads including carriage of material in all leads & lifts. A) 180 lpm at 56 m Head

Pipes & Accessories:- Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required including carriage of material in all leads & lifts. Make:-Jindal Hisar/Tata/Surya Parkash only. A) 80 mm dia

B) 150mm dia

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : including carriage of material in all leads & lifts. Make:-Jindal Hisar/Tata/Surya Parkash only. A) 25mm Dia

B) 32 mm Dia

C) 50mm dia

D) 80mm dia

E) 100mm dia

F) 150mm dia

G) 200mm dia ( wall thicknes 6.3 mm)

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/ Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type ‐A) with blank Gunmetal/ Stainless Steel cap and chain as required : including carriage of material in all leads & lifts. Make:-Gratex/Newage/Atasee make or it's equivalent as approved by the Engineer-in-charge. A) Single headed Stainless steel

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : including carriage of material in all leads & lifts.Gratex/Newage/Atasee make or it's equivalent or it's equivalent as approved by the Engineer-in-charge. A) Single headed Stainless steel

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : including carriage of material in all leads & lifts. Make:- Joloto/Sant/Kartar. A) 65 mm Dia.

80mm dia

100mm dia

150mm dia

200mm dia

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : including carriage of material in all leads & lifts.Make:- Joloto/Sant/Kartar. A) 150mm dia

Providing, installation, testing and commissioning of non‐return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required : including carriage of material in all leads & lifts. Make:- Joloto/Sant/Kartar. A) 80mm dia

B) 150mm dia

Providing, installation, testing and commissioning of stainless steel Y strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange including carriage of material in all leads & lifts. Make:- Joloto/Sant/Kartar. A) 80 mm Dia.

B) 150mm dia

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type‐A) as required including carriage of material in all leads & lifts. - Stainless Steel (Grade 304) Make:- Newage/Atasee/Omax

Supplying and fixing first‐aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type ‐2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall including carriage of material in all leads & lifts. Make:- Newage/Atasee/Omax A) 30 Meters

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required including carriage of material in all leads & lifts. Stainless Steel (Grade 304) Make:- Newage/Atasee/Omax

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required including carriage of material in all leads & lifts. Make:- Newage/Atasee/Omax 4 way ‐ 150 mm dia M.S. Pipe

Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required including carriage of material in all leads & lifts.

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required including carriage of material in all leads & lifts. Make:- Danfoss/Indfoss

Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete including carriage of material in all leads & lifts. Make:- Agni/Atasee

Providing and fixing fully glazed MS fully welded construction double leaf door shutter for fire hydrant station fabricated from MS 50x50x6 mm angle iron frame, fixed to wall and hinged MS 40x40x5 mm angle iron door shutter with required MS sash bars for glazing complete with locking arrangements, stove enamelled fire red finish with 'FIRE HYDRANT' written in front including carriage of material in all leads & lifts. Approximate size 2100x900mm.

Providing and fixing pressure gauges with isolation cocks and chrome plated copper pipes as hydrant station to read pressure from 0‐20kg/cm2 complete and of dial dia 150 mm including carriage of material in all leads & lifts. Make:- H Guru

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of material in all leads & lifts : Make:- Zoloto/Kartar/Audco A) 25 mm nominal bore

B) 50 mm nominal bore

Supply, installation, testing and commissioning ISI marked (IS:15683) Fire Extinguisher, Carbon‐di‐oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307‐1966 and wall suspension braket as required as per specifications including carriage of material in all leads & lifts. Make:- Omax/Atasee/Ceasefire/Safex

Supply, installation, testing and commissioning ISI marked (IS:15683) portable fire extinguisher, water (gas pressure) type capacity 9 kg with gun metal cap and nozzle and complete in all respects including initial fill and wall suspension brackets as required as per specifications including carriage of material in all leads & lifts. Make:- Omax/Atasee/Ceasefire/Safex

Providing & fixing of MS Hose cabinet outdoor type of size 0.90 Mx0.60 Mx 0.50 M made of 2mm thick MS sheet with 6mm thick glazed glass doors i/c necessary locking arrangement suitable to accomodate 2nos 15m long hoses, one no branch pipe, etc. and mounted on wall or with raised brick platform. The cabinet shall be painted with red colour shade No. 536 of IS: 5 externally & white internally complete in all respects for external hydrant and as per enclosed specification including carriage of material in all leads & lifts. Make:- Omax/Atasee/Newage

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 including carriage of material in all leads & lifts.

Providing and fixing fire brigade suction hose coupling (draw out connection) with nut for female coupling as per IS‐902 complete with 150mm dia. Suction pipe and foot valve (to be connected to static tank) complete as required and as per enclosed specification including carriage of material in all leads & lifts. Newage/Atasee/Omax

Supplying, laying/ fixing, testing and commissioning of following thickness resin bonded fiber glass pipe section insulation having density 80 kg/cum or mineral wool (non combustible) having density of 144 Kg/ cu m duly covered with a layer of 120 gm/sqm polythene sheet (vapour barrier) on existing pipe and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints etc. as per specifications and as required including carriage of material in all leads & lifts. A) 50 mm

Providing & fixing of 25mm dia. gunmetal air release valve with all fittings and forged ball valve on header complete as required and as per enclosed specification including carriage of material in all leads & lifts. Make:- Zoloto/Kartar/Audco

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories. Pendent Sprinkler including carriage of material in all leads & lifts. Make:- HD/Tyco/Aqua.

Koushal General Traders

Sun Engineering Company

TARUN FIRE SYSTEM