Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹1.7 L
Closing Date
1 Oct 2026, 5:00 pm3d left
Karnataka Co-operative Milk Producers Federation Limited
Sandesh S
Construction of Raw milk reception dock laboratory at Mega Dairy Premises, Mysore
KMF/2026-27/BD/WORK_INDENT492
KMF/2026-27/BD/WORK_INDENT492
Open
Buildings
Two Tender Document System(Two Cover)
Managing Director Mysuru District Co-operative Milk Producers Societies Union Limited (ENGG)
4 documents required · 4 mandatory
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Assessed available bid capacity
ESI Copy or group insurance
PWD Registration certificate
Experience certificate of similar nature of work
GST COPY
Pan copy
Annual turnover
Liquid assets
Income tax returns
Audited balance sheet
₹2,120
₹1.7 L
22 Sept 2026
22 Sept 2026
3 Oct 2026
1 Oct 2026
Construction of Raw milk reception dock laboratory at Mega Dairy Premises, Mysore
Earth work in surface excavation by mechanical means for lowering andleveling the ground for all works other than foundation in all kinds of soils andupto depth not exceeding 1.5m as per drawing and t...
Earth work excavation for Foundation by mechanical means for all works anddepth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution l...
Earth work excavation for Foundation by mechanical means for all works anddepth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution l...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...
Construction of Granular Sub-Base by Mix in Place Method by providing well graded Gravel, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavat...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced/ Plain cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works andother parallel works from 0.50m ...
Providing and laying in position Reinforced/ Plain cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works andother parallel works from 0.50m ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works andother parallel works from 0.50m to 3.50 m height. ...
Providing and laying in Reinforced cement concrete for all Basement andsurface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates a...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works andsuper structure works of bridges upto 3.50 m height. The...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works andsuper structure works of bridges upto 3.50 m height. The...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works andsuper structure works of bridges upto 3.50 m height. The...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works andsuper structure works of bridges upto 3.50 m height. The...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works andsuper structure works of bridges upto 3.50 m height. The...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works andsuper structure works of bridges upto 3.50 m height. The...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works andsuper structure works of bridges upto 3.50 m height. The...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works andsuper structure works of bridges upto 3.50 m height. The...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works andsuper structure works of bridges upto 3.50 m height. The...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works andsuper structure works of bridges upto 3.50 m height. The...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works andsuper structure works of bridges upto 3.50 m height. The...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works andsuper structure works of bridges upto 3.50 m height. The...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works andsuper structure works of bridges upto 3.50 m height. The...
Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup bo...
Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup bo...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/cum and minimum compressive strength of 4.00 N/sqmm conforming to IS...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/cum and minimum compressive strength of 4.00 N/sqmm conforming to IS...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/cum and minimum compressive strength of 4.00 N/sqmm conforming to IS...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/cum and minimum compressive strength of 4.00 N/sqmm conforming to IS...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Supply and Fixing of Powder Coated Mild Steel doors, frames and shutters made of Skin pass galvanized Iron sheet conforming to Base Steel as per IS 513 Quality, Galvanized as per IS 277 with Hot Zinc ...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows andother Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspens...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows andother Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspens...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approve...
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approve...
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approve...
Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fittin...
Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fittin...
Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls andcoloumns/beams with necessary aluminium frame works at required level made ...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to Ceiling / Concrete / brick masonry including rounding off corners wherever required s...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to Ceiling / Concrete / brick masonry including rounding off corners wherever required s...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08percentage and conforming to IS: 15622, of approved ma...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08percentage and conforming to IS: 15622, of approved brand a...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08percentage and conforming to IS: 15622, of approved brand a...
Providing andfixing Acid proof tiles flooring (Endura Tiels) using 600X600X20mm size tiles of reputed approved make, set in C.M. 1:3 with 4mm wide spacers including providing andfilling approved epoxy...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap fo...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap fo...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M25 (Grade), c...
Vaccum de-watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of generator, HOM of machinery, Screed Vibratory, Power Floater, blade an...
Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete inc...
Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed dr...
Providing and laying Cement concrete pavement with 1:2:4 for commercial andresidential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal siz...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls at 1.25 ltr/10 sqm over and including one coat...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls at 1.25 ltr/10 sqm over and including one coat...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls at 1.25 ltr/10 sqm over and including one coat...
Finishing walls with 100percentage Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali andfungal resistance, dirt resistance exterior paint o...
Finishing walls with 100percentage Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali andfungal resistance, dirt resistance exterior paint o...
Finishing walls with 100percentage Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali andfungal resistance, dirt resistance exterior paint o...
Painting wood work / Masonry Surface with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90 ltr/10 sqm over an under coat of primer applied at0.75 ltr/10 sqm of approved brand and...
Painting wood work / Masonry Surface with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90 ltr/10 sqm over an under coat of primer applied at0.75 ltr/10 sqm of approved brand and...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at 0.90 ltr/10 sqm over an under coat of primer applied at 0.80 ltr/10 sqm of approved brand and manufacture...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Providing and laying integral cement based waterproofing treatment iincluding preparation of surface as requried for treatment of roofs, balconies, terrace etc., consisting of following application. (...
Providing and fixing Steel work in built up tubular trusses (round, square or rectangular hollow tubes etc.) etc., including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (pluse0.05 percentage) total coated thickness with zinc c...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings andbridges and such simillar works in all kinds of soils, as per d...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern andC.P. flush bend with fittings andC.I...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
Providing and fixing CI / PVC Nahani trap of approved make conforming to ISI specifications and construction of Cistern in CC 1:2:4 as per directions (Rate is inclusive of cost of materials and fixtur...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
Providing and fixing PTMT pillar cock of approved quality and colour. 15mm nominal bore, 125mm long foam flow, weighing not less than 120 g
P/F. UPVC or equivalant approved make Pipes (Supreme or equivalent make) with malleable G.I. R brand specials such as tee, bend, elbow, socket, reducing sockets, union, collers etc. as required includ...
P/F. UPVC or equivalant approved make Pipes (Supreme or equivalent make) with malleable G.I. R brand specials such as tee, bend, elbow, socket, reducing sockets, union, collers etc. as required includ...
P/F. UPVC or equivalant approved make Pipes (Supreme or equivalent make) with malleable G.I. R brand specials such as tee, bend, elbow, socket, reducing sockets, union, collers etc. as required includ...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes andfittings with one step solvent cement, trenching, refilling andtesting of joints complete as per dire...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes andfittings with one step solvent cement, trenching, refilling andtesting of joints complete as per dire...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes andfittings with one step solvent cement, trenching, refilling andtesting of joints complete as per dire...
KSRB13-8.6: Providing and fixing to wall, ceiling and floor, high density polyethylene pipes 6.00kgf/sq.cm working pressure 160mm outside diameter with special flange, compression type fittings, wall ...
Supply andInstallation of Industrial Floor Trap (AMUL TRAP) 304 L Grade 300x300x300mm outlet 114 Dia OD 100mm Length inserted / connected into Main Drain Line
Constructing brick masonry inspection chamber 455x610mm, and 450mm depth, (clear inside dimension) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar ...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal ...
A. DISTRIBUTION BOARDS: Supplying and fixing regular MCB distribution boards on wall/wood board/ flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capac...
4 Way TPN MCB DB
1 No 32A 4P RCCB 300mA pluse32A TPN MCB
Outgoings :12 No of 6/10/16A SP MCBs
12 Way SPN MCB DB
1 No 25A DP RCCB 300mA pluse25A DP MCB
8 No of 6/10A SP MCBs
16 Way SPN MCB DB
1 No 25A DP RCCB 300mA pluse25A DP MCB
12 No of 6/10A SP MCBs
LT cable : Supply andLaying of 1100V grade, XLPE/ PVC insulated, PVC sheathed, Aluminium / copper conductor, steel armoured cables. The cable shall be laid in exsiting trench, cable tray / clamped on...
LT End Termination: Supply and providing end termination for below listed PVC insulated, PVC sheathed, aluminium conductor,steel armoured, 1100V grade , cable using brass cable glands and copper lugs...
Supply and fixing of conduit / structural steel support ceiling suspended type / wall bracket type clamps with necessary saddles for fixing of conduits / cables, cable trays and where ever necessary. ...
Supply and installation of DWC HDPE pipe. The rate shall include, pipe accessories, sealing of pipe entrys, fixing accessories. The rate shall exclude cost of excavation and back filling and ramping o...
110 mm outer dia/95mm inner dia
Excavation of trench of 900 mm deep and of required width for laying of cables/ humepipes. The rate shall include cost of refilling the excavated portion and consolidating etc., as required. The rate...
Supply and laying of sand cushioning for under ground cables laid in existing trench.
Supply and laying of brick protection for under ground cables laid in existing trench.
Supply andinstallation of hot dip galvanized sheet steel bolted rung type ladder cable trays with suitable bends, off sets wherever required. The supporting brackets shall be of U type with suitable ...
200 mm x 50 mm x 1.5 mm
100 mm x 50 mm x 1.5 mm
WIRING SYSTEM : Supplying and wiring adopting loop system in suitable size PVC Conduit/casing capping casing capping using2x1.5Sqmm (Phase andNeutral) &1x1.0sqmm (Earthwire)FRLS multistrand PVC insula...
Medium point above 3 MT upto 6 MT
Long point above 6 MT upto 10 MT
Two in a row above 3 MT upto 6 MT from tapping point to outlet via switch box
Three in a row above 6 MT upto10 MT from tapping point to outlet via switch box
Ceiling fan point controlled by 6A modular type switch and fan regulator. Medium point above 3 MT upto 6 MT
Long point above 6 MT upto 10 MT
Exhaust fan point (Single phase) controlled by 6A modular type switch and 6A socket outlet near the exhaust fan - Medium point above 3 MT upto 6 MT
CIRCUIT MAIN / POWER MAIN / SUBMAINS : Supplying and wiring for lighting circuit mains/ power mains/submains, using one of FRLS PVC insulated 1100V grade, multistrand Copper conductor single core cabl...
2 x 2.5 Sqmm pluse1 x 1.5 Sq mm PVC Insulated wires drawn in 20 mm dia PVC conduit
2 x 4 Sqmm pluse1 x 2.5 Sq mm PVC Insulated wires drawn in 20 mm dia PVC conduit
2 x 6 Sqmm pluse1 x 4 Sq mm PVC Insulated wires drawn in 32 mm dia PVC conduit.
2 x 10 Sqmm pluse1 x 6 Sq mm PVC Insulated wires drawn in 32 mm dia PVC conduit.
4 x 6 Sqmm pluse2 x 4 Sq mm PVC Insulated wires drawn in 32 mm dia PVC conduit.
4 x 10Sqmm pluse2 x 6 Sq mm PVC Insulated wires drawn in 40 mm dia PVC conduit.
Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. (Group-A)...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required No of machine screws, bolts nuts etc., complete on the existing met...
Supplying and fixing of modular switch/ Socket / stepped electronic fan regulator / dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way. Group B
6Amps 3way socket.
16Amps one way switch
6/16Amps universal socket
Stepped Fan Regulator.
SUPPLY andINSTALLATION OF LIGHT andFAN FIXTURES: Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powd...
Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and70percentage lumen maintenance with CRI greater tah 80. Power Input: 220-240Vat 5...
10W LED, bulk head light fixture of type LIBHP-10-C-V1 of Orient make/equivalent.
Supplying of 36W LED, 2 X 2 surface Mounted Light Fixture of type LCTLSNE-36-FO-CDL of CG make/equivalent.
40 W LED IP-65 Light fixture of type LWKTP-40-C of Orient make/equivalent.
Supplying of recess mounting non integral type LED Luminaire comprising of pressure extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 cri greater than 70pe...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, and 50 cycles. Single phase AC supply conforming to IS-374-1979 and with double...
Fixing a ceiling fan of all capacities and all types with necessary clamps andS hook made out of 15mm dia MS rod, with 5 amps ceiling rose of approved quality with necessary length of 23 / 0.0076 inc...
Supplying exhaust fan of 1440 RPM of 300mm (12inches) size with bracket blades complete for light duty suitable for operate on 230V 50Hz, AC Supply.
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make.
Fixing all types and all capacities fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076twin twisted PVC insulated wires, requ...
EARTHING SYSTEM : Supplying, fixing and wiring earth electrode for grounding of Lifts, Transformers, DG sets etc., Using 40 mm dia 2.9mm thick 2.5MT long GI pipe with GI funnel with mesh and suitable...
Supplying and running of GI strips for grounding connections, using necessary fixing materials as required - 25x3mm GI strip
Supplying and running of Cu strips for grounding connections, using necessary fixing materials as required - 25x3mm Cu strip
Supplying and running of GI strips for grounding connections, using necessary fixing materials as required - 8 SWG, GI Wire
600 x 600 x 3 mm GI Plate
TELEPHONE SYSTEM : Supplying and fixing of modular switch/ Socket / telephone socket etc., on existing modular switch plate as per IS 3854 and IS 1293. - Telephone socket
Supplying anddrawing PVC flexible 2 pair telephone unarmoured tinned copper cable.
Supplying andLaying of 2mm thick, heavy guage PVC conduit pipe in the concealed slab / groove cutting with suitable size bends, collars, clamps, metal junction boxes adhesive paste etc., and running ...
Supplying andinstalling of multicore 0.61mm, copper conductor, PVC insulated, PVC sheathed, armoured telephone cable laid drawn through,existing conduit with all necessary accessories as required. 5 p...
Supplying and fixing of MDF krone juntion box with KRONE module / Telephone cable termination.- 5 pair - Supplying andFixing
DATA SYSTEM : Supplying & Laying of 2mm thick, heavy guage PVC conduit pipe in the concealed slab / groove cutting with suitable size bends, collars, clamps, metal junction boxes adhesive paste etc.,...
25mm dia PVC Conduit - Supplying andlaying
Supplying and fixing of modular Socket on existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O outlet
Supplying and drawing UTP -CAT 6E LAN cable
Supply, installation , testing andcommissioning of managed L2 12 port POE switch of 10/100/1000 Mbps with 2 Gig SFP. and power budget of min. 170W. The switch shall be mounted on existing rack. The ...
Supply and fixing of patch panel with CAT-6 I/O mounted on existing rack with all necessary fixing accessories. The rate shall also include providing end termination. 24 port 10/100/1000 patch panel
Supply, installation , testing andcommissioning of SFP Transceiver 1000BASE-LR SINGLE MODE LC GBIC
Supply and fixing of …MT cat 6 patch cable- 1 MT
Supply and fixing of …MT cat 6 patch cable- 2 MT
Supply, installation , testing andcommissioning of managed L2 12 port POE switch of 10/100/1000 Mbps with 2 Gig SFP. and power budget of min. 170W. The switch shall be mounted on existing rack. The ...
Supply and installation of rack mount LIU loaded with couplers and all necessary accessories. -6 fibre SC style single mode Fiber Panel loaded with Splice Tray, Adapters andPigtails- 1U
Supply, laying and testing of Optical fiber cable, the rate shall include the cost of joint enclosure and splicing of Optical Fiber cables. - 6 Core single mode OS2 corrugated steel tape armoured loo...
Supply and fixing of switch wall mounting closed rack with power manager and cable manager - 9U with 450mm depth with all necrssary accessories as required.
IP CCTV SYSTEM : Supplying andLaying of 2mm thick, heavy guage PVC conduit pipe in the concealed slab / groove cutting with suitable size bends, collars, clamps, metal junction boxes adhesive paste ...
25mm dia PVC Conduit - Supplying andlaying
Supplying, drawing and connecting of 1 pair E - Cat-6 cable in 25mm dia PVC conduit with all other accessories.
Supply, installation, testing and commissioning of outdoor 2.0MP IP IR Bullet WDR, 2.7-12mm varifocal Color Camera, 1/3inches CMOS, H.264/MJPEG High-profile, dual Stream support, True Day andNight (T...
Supply, installation, testing and commissioning of outdoor 2.0MP IP IR Minidome, WDR, 2.7-12mm varifocal Color dome Camera, 1/3inches CMOS, H.264/MJPEG High-profile, dual Stream support, True Day and...
Supply and fixing of …MT cat 6 patch cable- 1 MT
Supply, installation, testing and commissioning of network video recorder Supporting up to 8 IP Camera Streams with 8TB HDD, shall support windows platform, warning system alerts for fan fault, HDD te...
MISCELLANEOUS WORKS: Supply andlaying of 2 mm thick, PVC conduit with all conduit accessories etc., as required. The rate shall include chasing of walls / floors and plastering the chased portion as r...
25mm dia PVC Conduit
32mm dia PVC Conduit
Construction of brick masonry inspection chambers of internal clear dimension as mentioned below by using first class table moulded modular bricks 230 mm thick wall in cement mortor joints in 1:6, ove...
600mm x 600mm x 750 mm depth with 600x600mm RCC cover
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the...
Supply andLaying of rubber mats of 11kv grade, 1.8.MT x 0.9MT X 2.5mm (thick) and of sufficient thickness as required by the Electrical Inspectorate and confirming to IS 15652
Providing rubber gloves of electrical quality tested to 11 KV.
Fixing of first Aid box containing medicines for 50 persons to give first aid treatment.
Supply and fixing in position approved shock treatment chart written in English, Hindi and local language. The chart shall be framed in teakwood frame and covered with glass.
Supply andFixing of DANGER / NO ADDMISSION. / NO SMOKING / Board made out of MS sheet metal with 2 coats of non-corrosive enamelled paint of approved shape and size as specified by local electri...
Supplying, erecting, testing andcommissioning of 3kVA OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and with 15 min back up. The rate shall inclu...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
emd ktpp act.pdf
Instructions to Tenderers • 0.41 MB
TECHNICAL TENDER BOOK.docx
Tender Document • 0.04 MB
doc to be submitted.docx
Tender Submission Guidelines • 0.02 MB
kw3.pdf
Instructions to Tenderers • 0.69 MB
special criteria.docx
Instructions to Tenderers • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .