Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹26.7 LAccepted-AOC 529 RAM BAGH ROAD AMBALA CANTT 133001 HR | AMBALA | HARYANA | 133001 | ₹26.7 L Quoted ₹27.2 L | L-1 | Accepted-AOC RATES ARE FOUND REASONABLE AND THE FIRM BEING L1 BIDDER |
| 2 | L-2₹30.2 LRejected-Finance RANGIYA DIST KAMRUP ASSAM 781365 | BAKSA | ASSAM | 781365 | ₹30.2 L | L-2 | Rejected-Finance BEING L2 BIDDER |
| 3 | L-3₹30.4 LRejected-Finance K NATH CO NEAR RAM SAHAI INTER COLLEGE GARH ROAD MEERUT UTTAR PRADESH 250002 UDYAM UP 56 0029708 09AFYPG4624B1ZD B R | MEERUT | UTTAR PRADESH | 250002 | ₹30.4 L | L-3 | Rejected-Finance BEING L3 BIDDER |
| 4 | L-4₹37.1 LRejected-Finance | ₹37.1 L | L-4 | Rejected-Finance BEING L4 BIDDER |
| 5 | L-5₹37.9 LRejected-Finance C I T I COMPLEX KALAPAHAR NEAR NATIONAL TEA HOUSE GUWAHATI 781016 | KAMRUP METRO | ASSAM | 781016 | ₹37.9 L | L-5 | Rejected-Finance BEING L5 BIDDER |
| Sl No | Description | Qty | Unit | RK STEEL FABRICATORs L1 | M/S NARAYAN ENTERPRISE L2 | KIRAN REED INDUSTRIES L5 | HINDUSTAN ENGINEERING WORKS L4 | M/S K NATH AND CO. L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00Note:-S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,wedging, glueing, providing hinges,applying putty to level the surface, placing every part in-tact and polishing the disturbed portion & Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the Wooden furniture shall be french polished with high gloss finish shade as approved by Engineer In charge,after properly cleaned and smoothened the surface.Painting the steel disturbed portion & painting steel surface with two coats of synthetic enamel paint of existing shade with spray gun & apply red oxide primer where ever required after properly smoothening the surface with sand paper. Top shall be 18 mm thick pre-laminated particle board both side laminated, duly fixed with half round teak wood beading in matching shade with synthetic adhesive. Make of particle board : Century/Archid /Greenply.All kind of work will be executed where the furniture exist in different user Units of GE Rangia including BSO's Furniture Yard at Rangia, and office hours only as directed by Engineer-in-Charge.(Note applicable for item Srl No-1.01 to 16.01). | ||||||||
| 1.01 | Bed Ply top :FD-246- S&F of 12 mm thick BWR grade plywood in Bed. Make-Archidply/Century Ply/ Greenply. | 50 | EACH | 1,500 ₹75,000 | 1,800 ₹90,000 | 1,900 ₹95,000 | 1,750 ₹87,500 | 1,490 ₹74,500 |
| 1.02 | Repair of Head rest as per drg. | 25 | EACH | 500 ₹12,500 | 145 ₹3,625 | 220 ₹5,500 | 848 ₹21,200 | 100 ₹2,500 |
| 1.03 | Repair of Foot rest as per drg. | 25 | EACH | 400 ₹10,000 | 110 ₹2,750 | 220 ₹5,500 | 848 ₹21,200 | 200 ₹5,000 |
| 1.04 | S& F of Long Rail as per drg. | 20 | EACH | 400 ₹8,000 | 280 ₹5,600 | 80 ₹1,600 | 300 ₹6,000 | 300 ₹6,000 |
| 1.05 | S & F of Stiffener as per drg. | 25 | EACH | 100 ₹2,500 | 80 ₹2,000 | 80 ₹2,000 | 80 ₹2,000 | 160 ₹4,000 |
| 1.06 | Polishing of bed plytop as per above Note. | 50 | EACH | 150 ₹7,500 | 110 ₹5,500 | 130 ₹6,500 | 250 ₹12,500 | 250 ₹12,500 |
| 2.01 | Table dining 6 person FD-273:- S & F of Top as per drg. | 120 | EACH | 750 ₹90,000 | 730 ₹87,600 | 1,000 ₹1.2 L | 1,500 ₹1.8 L | 650 ₹78,000 |
| 2.02 | Repair to wooden parts of table dining 6 persons and strengthen with providing and fixing with wooden nails | 120 | EACH | 200 ₹24,000 | 40 ₹4,800 | 100 ₹12,000 | 120 ₹14,400 | 280 ₹33,600 |
| 2.03 | Polishing of Table dining as per above note. | 120 | EACH | 100 ₹12,000 | 78 ₹9,360 | 200 ₹24,000 | 170 ₹20,400 | 410 ₹49,200 |
Updated dates
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
16 Mar 2026, 6:00 pmClosed
GE Rangia
GE Rangia C/O 99 APO Rangia
REPAIR OF VARIOUS TYPES OF FURNITURE (WOODEN AND STEEL) AT ALL MIL STN UNDER GE RANGIA
2026_MES_752903_1
8987/RNG/E8
Open Tender
Miscellaneous Works
270 days
RANGIA, CHANGSARI, HATTIGOR, TAMULPUR AND DARRANGA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Rangia
₹80,000
Yes
27 Mar 2026
16 Feb 2026
18 Mar 2026
16 Feb 2026
16 Mar 2026
3 Mar 2026
16 Feb 2026 - 23 Feb 2026
Note:-S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,wedging, glueing, providing hinges,applying putty to level the surface, placing every part in-tact and polishing the disturbed portion & Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the Wooden furniture shall be french polished with high gloss finish shade as approved by Engineer In charge,after properly cleaned and smoothened the surface.Painting the steel disturbed portion & painting steel surface with two coats of synthetic enamel paint of existing shade with spray gun & apply red oxide primer where ever required after properly smoothening the surface with sand paper. Top shall be 18 mm thick pre-laminated particle board both side laminated, duly fixed with half round teak wood beading in matching shade with synthetic adhesive. Make of particle board : Century/Archid /Greenply.All kind of work will be executed where the furniture exist in different user Units of GE Rangia including BSO's Furniture Yard at Rangia, and office hours only as directed by Engineer-in-Charge.(Note applicable for item Srl No-1.01 to 16.01).
Bed Ply top :FD-246- S&F of 12 mm thick BWR grade plywood in Bed. Make-Archidply/Century Ply/ Greenply.
Repair of Head rest as per drg.
Repair of Foot rest as per drg.
S& F of Long Rail as per drg.
S & F of Stiffener as per drg.
Polishing of bed plytop as per above Note.
Table dining 6 person FD-273:- S & F of Top as per drg.
Repair to wooden parts of table dining 6 persons and strengthen with providing and fixing with wooden nails
Polishing of Table dining as per above note.
Table dining 8 person FD-273:- S & F of Top as per drg.
Polishing of Table dining as per above note.
Chair dining FD-279- S & F of Back rest as per drg.
S & F of Front leg as per drg.
S & F of Rear legs as per drg.
S & F of Rails including hole of canning as per drg.
S & F of Leg stiffner as per drg.
Polishing of Chair dining as per above Note.
Removing the existing unserviceable cane plastic from the chair and Recanning the chairs with plastic cane as existing size.
Sofa set 5 seater with cushion) FD-281:- Taking out old pressed /torn old cushions from sofa set and Supply 40 density thick foam cushion of size 21”x22”x4” duly fixed with the GM fabric as approved by GE.Cushion cover with marking cloth shall be provided with good quality zip stitched on one edge of cushion cover with standard fitting.(Make of Cushion-kurlon Gold line/ Sleepwell).
Polishing of sofa set 5 seater as per above Note.
Table writing FD-275:- S & F of Top as per drg.
S & F of Legs as per drg
S & F of Rails as per drg
Repair of Drawer as per drg.
S& F of lock as per existing pattern.
S & F of Stiffener as per drg.
Polishing of Table writing as per above note.
Table office officer steel FD-1003:- S & F of Top as per drg.
Repair of steel portion by removing denting, welding/grinding and making surface smooth finish.
S & F of drawer lock as per existing pattern.
Painting of table office officer steel as per above Note.
Table 900x600 mm steel with/without drawer FD-1008/1007:- S & F of Top as per drg.
Repair of steel portion by welding, grinding and applying putty etc.
Painting of Table 900x600 with/without dwr as per above note.
S & F rubber shoes for table.
Table 900x900 mm steel FD-1009:- S & F of Top as per drg.
Repair of steel portion by welding, grinding etc.
Painting of Table 900x900 as per above note.
S & F rubber shoes for table.
Table office clk steel FD-1004:- S & F of Top as per drg.
Repair of steel portion by removing denting, welding/grinding and making surface smooth finish.
S & F of drawer lock as per existing pattern.
Painting of table office clk steel as per above Note.
Locker steel: FD-1029/257- S&F of hasp & staples as per existing pattern.
Repairs to Steel portion by welding/Grinding/applying putty to making surface smooth finish.
S & F of CP handle as per existing pattern.
S & F of Leg as per existing pattern.
Painting of Locker steel as per above Note.
Almirah large steel :FD-1031:- S & F of lock as per existing pattern and shape. Make-Harrison/Godrej/Link
S & F of CP handle as per existing pattern.
Repair of steel portion with welding,grinding and applying putty to smooth the surface.
S & F of Leg as per existing pattern.
Painting of Almirah large steel as per Note.
Charpoy GI Pipe Plytop:- FD-220 :- Taking out existing broken plywood from the charpoy by loosining the nut bolts with washer. S&F of new 12 mm thick BWR grade plywood fixed to Charpoy from with Nut, Bolts, Make of Plywood- Greenply/Century Ply/Archidply
S&F of flat iron of size 40x40x5 mm thick, support the plywood on charpoy as specified and directed by Engineer Incharge
S&F of three way GI elbow as specified in drg and directed by Engineer in charge.
Repairs to Steel portion by welding/Grinding/applying putty to making surface smooth finish.
Charpoy MS tubing with plytop/ Charpoy IP with Hard Top:- CWE/TEZ/04/ FD/MAP-II/01:- Taking out existing broken plywood from the charpoy by loosining the nut bolts with washer. S&F of new 12 mm thick BWR grade plywood fixed to Charpoy from with Nut, Bolts, Make of Plywood- Greenply/Century Ply/Archidply
Repairs to Steel portion by welding/Grinding/applying putty to making surface smooth finish.
S & F of Hard rubber shoes as per drg
Painting of Charpoy MS tubing with plytop/ Charpoy IP with Hard Top as per above note
S&F of prelaminated particle board fixed with half round beeding all around the board in various furniture as required as specified and directed by Engineer in Charge.
S&F of BWR grade plywood of 6 mm thick in various furniture as required as specified and directed by Engineer in Charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
8987TENDERDOCUMENT.pdf
Tender Documents • 0.22 MB
BOQ_843291.xls
BOQ • 0.55 MB
Download all tender documents and submit your bid