Renovation work of Chaudhary Charan Singh Kalindi Udhyan, Okhla New Delhi.

Amount

Providing & laying bituminous Concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading premixed with bituminuos binder @ 5.2 % of mix and filler ,transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade level and alignment rolling with smooth wheeled vibratory and tandem rollers to achieve the desire compaction as per MORTH specification clause No. 507 complete in all respects ,including cost of tack coat , taking output 191cum (450.76 tonne)

Providing & fixing of 20mm. M.S. square bar by cutting and extension of existing square bar in railing using ISMC 75x40x5 mm., M.S.flat 80x5 mm., M.S. hollow section 80x40x3 mm. including 10 gauge mild steel welded mesh having aperture 3" x1" by fixing M.S. flat 80 x 5 mm. and ISA 35x35x5 mm. cutting, welding, fixing, cost of all material, all lead and lift, labour, T & P required for proper completion of work

Providing & fixing of 10 gauge mild steel welded mesh for 2.50 metre height having aperture 3" x1" by fixing M.S. flat 80 x 5 mm. including cutting, welding, fixing, cost of all material, all lead and lift, labour, T & P required for proper completion of work

Providing and fixing of punched tape concertina coil wire 600 mm dia 10 m openable length having 50 nos. rounds per 6 metre length upto 3 metre height of railing with existing angle iron Y-shaped 3 metre apart with 9 horizontal R.B.T. wire stud tied with G.I. staples and G.I. clips to retain horizontal including G.I. barbed wire to tied angle iron fixing R.B.T. wire/ spring core wire of high tensile strength of 165 kg/ sq.mm with tape weight 43.478 gm/ metre, cost of all material, labour,all lead and lift, T & P required for proper completion of work

Providing & laying cement concrete 1:1.5:3 using 10-20 mm. crushed aggregate including cost of all material, labour, all lead and lift, T & P required for proper completion of work

Providing & fixing centering and shuttering of base wall including cost of all material, labour, all lead and lift, deshuttering, T & P required for proper completion of work

Painting work on iron surface using enamel painting and one coat of primer after cleaning the surface including cost of all materials, labour, T & P, all lead & lift for proper completion of work

Earth work in digging trenches for laying of pipeline including backfilling, all labour, T & P for proper completion of work

Supply and laying of fine Sand in trench below pipeline including cost of all material, labour, all lead and lift, T & P for proper completion of work

Providing, laying, testing & commissioning of 'B' class heavy duty 100 mm. dia G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe in the trench with suitable clamp and painting with two or more coats of synthetic enamel paint of required shade in trench excluding excavation but including removal of damaged pipeline, debris etc., cost of all material, labour, T & P, all lead & lift for proper completion of work

Providing, laying, testing & commissioning of 'B' class heavy duty 80 mm. dia G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe in the trench with suitable clamp and painting with two or more coats of synthetic enamel paint of required shade in trench excluding excavation but including removal of damaged pipeline, debris etc., cost of all material, labour, T & P, all lead & lift for proper completion of work

Dismantling 20 mm. thick old plaster including racking of joints and disposal of debris upto 2 km. distance including cost of labour, T & P etc. for proper completion of work

20 mm. thick cement plaster in 1:4 cement and approved coarse sand including supply of all materials, labour, T & P etc. required for proper completion of work

Providing & laying cement conrete 1:2:4 using 10-20 mm. crushed aggregate including cost of all materials, labour, T & P, all lead & lift for proper completion of work

Dismantling damaged tile work in floors and walls thick laid in cement and coarse sand mortar including racking out joints, disposal of unserviceable material up to 2 km. distance including all labour, T & P complete

Supply & fixing 8 mm. thick glazed mat finish antiskid, scratch free joint free hard floor tiles of size 500x500mm. of approved company like RAK, JOHNSON, SOMANY or equivalent make of approved shade, colour and pattern as directed by Engineer -in-charge in with 1:3 cement and coarse sand mortar with approved quality adhesive finished with white cement and pigment to match the tiles shade etc. complete including cost of all material, labour T&P all lifts and leads etc. for proper completion of work

Providing and fixing 20 mm. dia Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing, jointing of pipes & fittings with one step CPVC solvent cement and testing of joints for proper completion of work

Providing and placing polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank for proper completion of work

Providing and fixing vitreous china flat back wash basin 630 x 450 mm.with pefestal, C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including fittings and brackets, cutting and making good the walls, T & P, labour required for proper completion of work

Providing and fixing Coloured Vitreous china 10 litre (full flush) capacity controlled low level flushing cistern with all fittings and fixtures, T & P, labour required for proper completion of work

Providing and fixing Wall mounted water closet of size 780 x 370x690 mm including supply of all materials, T & P, labour required for proper completion of work

Providing & fixing white vitreous china waterless urinal of size 600 x 330 x 315 mm. having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal with all fittings and fixtures complete, including cost of all materials, T & P, labour required for proper completion of work

Supply and fixing of decorative 40 to 45 watt LED post top indirect light luminaire having pressure die cast aluminium body and clear glass with driver set confirming to IP 65 and above protection including cost of M.S. post, fixing all material, labour, T & P required for proper completion of work

Supply & fixing of underwater submersible waterproof pool light IP 67 10 watt, 12 V AC housing material epoxy powder coated aluminium pressure die casting, beam angle wide, toughned & scratch resistant front glass including 3 meter 4 mm. 3 core copper cable, stand required for proper completion of work

Supply and fixing of decorative 8 to 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete including cost of fixing all material, labour, T & P required for proper completion of work

Supplying, installation, testing and commissioning of Electric driven horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal at a flow of 1620 lpm at 56 m head conforming to IS 1520 with 40 HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. including suitable cement concrete foundation duly plastered with anti vibration pads, cost of all material, labour, T & P, cartage, all lead & lift for proper completion of work

Supplying, installation, testing and commissioning of Electric driven pressurisation horizontal type, multistage, centrifugal split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal at a flow of 300 lpm at 70 m head conforming to IS 1520 with 10 HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. including suitable cement concrete foundation duly plastered with anti vibration pads, cost of all material, labour, T & P, cartage, all lead & lift for proper completion of work

Supplying, installation, testing and commissioning of Electric driven pressurisation horizontal type, multistage, centrifugal split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal at a flow of 180 lpm at 70 m head conforming to IS 1520 with 7.5 HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. including suitable cement concrete foundation duly plastered with anti vibration pads, cost of all material, labour, T & P, cartage, all lead & lift for proper completion of work

Providing, laying, testing & commissioning of 'B' class heavy duty 80 mm. dia G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade including cost of all material, labour, T & P, cartage, all lead & lift for proper completion of work

Providing and fixing 50 mm. dia gate valve with C.I. wheel of approved quality (screwed end) including cost of all material, labour, T & P, cartage, all lead & lift for proper completion of work

Providing and fixing 80 mm. dia gate valve with C.I. wheel of approved quality (screwed end) including cost of all material, labour, T & P, cartage, all lead & lift for proper completion of work

Providing and fixing 150 mm. dia gate valve ( C.I. sluice valve with cap) of approved quality including cost of all material, labour, T & P, cartage, all lead & lift for proper completion of work

Providing, laying, testing & commissioning of 'B' class heavy duty 150 mm. dia G.I. pipe conforming to IS1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade including cost of all material, labour, T & P, cartage, all lead & lift for proper completion of work

Providing, installation, testing & commissioning of water curtain nozzle 15mm dia nickel chrome plated brass including cost of all material, labour, T & P, cartage, all lead & lift for proper completion of work