ADDN/ALTN TO SMQs UNDER GE AIR FORCE PATHANKOT

Amount

Taking down cement plaster on brick or stone walls any descrpition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for 15 mm thick rendering in two layers (5 mm thick in CM 1:4 over 10 mm thick in cement mortar 1:6) mixing with WPC on top layer @ 200 ml/ bag of cement on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. (WPC shall be measured and paid separately).

Supply only liquid water proofing compound complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering or plastering work 10 mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling etc, incl roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of surfaces of wall and applying 3mm thick wall care putty and making the surface smooth complete all as specified and directed by Engineer-in-Charge.

Material and labour for preperation of new surfaces of wall and applying two coats of oil bound distemper using auto paint roller over one coat of chalk white primer on wall surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old decorated plastered or unplastered surfaces of Walls by brooming down or steel wire brushing ,scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots incl cornices washing down etc with clean water and applying one coat of oil bound Distemper, white or tinted including removing nails etc using auto paint roller & making good disturbed surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for additional one coat of oil bound distemper on walls complete all as specified and directed by Engineer-in-Charge.

Material and labour for three coat of white wash on newly plaster surface of walls including preparation of surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old decorated plastered or unplastered surfaces of Walls by brooming down or steel wire brushing ,scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots incl cornices washing down etc with clean water and applying one coat of white wash including removing nails etc and making good disturbed surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for three coat of white wash on newly plaster surface of ceilings including preparation of surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old decorated plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing ,scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots incl cornices washing down etc with clean water and applying one coat of white wash incl removing nails etc using auto paint roller & making good disturbed surface complete all as specified and directed by Engineer-in-Charge.

Dismantling of floor, hearth or wall tiling,any type flooring including cement mortar bedding (but not backing )and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over and incl screed bed or bedding layers of mortars 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc. 0.18 sqm and n. exc. 0.38 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over and incl screed bed or bedding layers of mortars 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

Material and labour for glazed ceramic coloured in different colour combination(alongwith highlighter shade) as approved by GE ,450x350x7mm thick on vertical surfaces such as skirting, dados and riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl rendering 10mm thick in CM (1:4) on brick or concrete surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for Marble work Udaipur green 16mm to 18mm thick (table rubbed and polished)as in steps of staircase, cooking plateforms and , treads, riser or landing of stair hall, window cill and like over 10mm thickscreed bed/plaster in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of other than white and black incl cutting of 25 mm dia hole for gas pipe( for cooking platform) and incl rounding to edges complete incl roughning of existing surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for 50mm thick Cement concrete type B- 1, 1:2:4 (20mm graded aggregate) as in floors finished even and smooth with using extra cement incl demolition in any position complete all as specified and directed by Engineer-in-Charge.

Material and labour for taking down and refixing the shutters of any description exc. 1 Sqm but n. exc. 2 Sqm in same or other opening after repair, easing and adjusting or resecuring complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 Sqm each and removing from site complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc. 4.00 Sqm each and removing from site complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description n. exc 2.00 sqm each and removing from site complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutters of size 30mm thick comprising of virgin polymer of K value 58-60 ( suspension grade), calcium carbonate and natural fibres ( wood powder/rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N ( face) & 900N ( edge), minimum compressive strength 50N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardnat . WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary fulll body threaded star headed counter sunk SS screws , all as per directions of Engr-in-charge. (Note:- Stainless steel butt hinges and neccessary S.S screws shall be paid separately)

Supply and fixing for factory made single extruded WPC solid decorative type flush door shutters of size 35mm thick comprising of virgin polymer of K value 58-60 ( suspension grade), calcium carbonate and natural fibres ( wood powder/rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N ( face) & 900N ( edge), minimum compressive strength 50N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardnat . WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary fulll body threaded star headed counter sunk SS screws , all as per directions of Engr-in-charge.( Note: stainless steel butt hinges and necessary SS screws shall be paid seperately).

Material and labour for 35mm thick single piece factory made wire gauge door shutter and incl of wire cloth ( Steel And Aluminium XPM and rates thereof included ) manufacturing by PVC sheets printed 5mm thick on both side on the frame made out of M.S. tube 19 SWG, size 19 x 19mm complete in all respect with lock rail & beautified by PVC beading all around fixed with PVC solvent cement compete as per drg No. CEPZ/TD-378/sheet 1/1 dated 27/12/2011 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for factory made single extruded WPC (wood polymer Composite) solid door/window/Ceosetory windows and other frames/chowkhat of size 50 X 100mm comprising of virgin PVC polymer of K value 58-60(suspension grade), calcium carbonate and natural fibres( wood powder/ rice husk/wheat husk) and non toxicc additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and and screwed with full body threaded star headed SS screws having minimum frame density 750 Kg/cum, screw withdrawal strength of 2200N ( Face) & 1100 N ( Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900N/mm2and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fastners of required dia and length complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for factory made double extruded/rebated WPC (wood polymer Composite) solid door/window/Ceosetory windows and other frames/chowkhat of size 50 X 125mm comprising of virgin PVC polymer of K value 58-60(suspension grade), calcium carbonate and natural fibres( wood powder/ rice husk/wheat husk) and non toxicc additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and and screwed with full body threaded star headed SS screws having minimum frame density 750 Kg/cum, screw withdrawal strength of 2200N ( Face) & 1100 N ( Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900N/mm2and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fastners of required dia and length complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 300mm long Stainless steel sliding door bolt with hasp and staple ( bolt type) and fixing clips of sheet, and fixing bolts and sliding bolts and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Stainless steel Butt hinges,exc 125 mm long, ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for stainless steel tower bolt 150 mm size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 150 mm long stainless steel handels complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for heavy duty stainless steel magnetic door stopper 4 inches long complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 200mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for stainless steel Peg set of six of size 460mm x 40mm x 3mm, fixed with machine screws and wooden and plastic cleats (minimum weight 190 gms), complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for rubber lining fitted with aluminium powder coated strip, 100mm wide for door cill, complete all as specified and directed by Engineer-in-Charge.

Material and labour for prepration of old painted steel surfaces of any description, by scrapping off old marks, tints of any kind, not other wise described over 10 cm width or girth and applying one coats of synthetic enamel paint , white or tinted complete all as specified and directed by Engineer-in-Charge.

Material and labour for prepration of old painted wooden surfaces by scrapping off old marks, tints of any kind, of any description, not other wise described over 10 cm width or girth and applying one coats of synthetic enamel paint , white or tinted complete all as specified and directed by Engineer-in-Charge.

Material and labour for prepration of new steel surfaces of any description, , not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for factory made single extruded WPC (wood polymer Composite) solid door/window/Ceosetory windows and other frames/chowkhat of size 45 X 70mm comprising of virgin PVC polymer of K value 58-60(suspension grade), calcium carbonate and natural fibres( wood powder/ rice husk/wheat husk) and non toxicc additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and and screwed with full body threaded star headed SS screws having minimum frame density 750 Kg/cum, screw withdrawal strength of 2200N ( Face) & 1100 N ( Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900N/mm2and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fastners of required dia and length complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made 20mm thick solid WPC(wood particle composit) sheet one side UV printed (of pattern as approved by GE)and other side wood nature colour for cupboard shutter of density 600 kg /Cbm bent 90° incl 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level etc. Complete as per direction of Engr-in-charge, Manufacture specification.

Supply and fixing in repair factory made 18/19 mm thick solid WPC(wood particle composit) without prelam sheet having both side wood nature colour for cupboard partitions/slabs of density 600 kg /Cbm bent 90° incl 100% termite/water proof, fire rertradent, Eco friendly, complete as per direction of Engr-in-charge, Manufacture specification.

Material and labour for 0.80 mm thick PVC edge binding tape around the 18 to 20 mm thick PVC shutter edge colour as directed, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 150 mm long fancy type stainless steel handelsfor shutters complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for continuous (piano) hinges, mild steel, bright finish width of flaps equal to shutter thickness complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 100mm size hasp and staple,stainless steel safety type, fixed with screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 50 mm dia polished hardwood knobs fixed with screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for high quality Magnet ball catcher for cupboard shutter, complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing for soft close concealed Auto hinges for cabinet case complete all as specified and directed by Engineer-in-charge.

Supply and Fixing for heavy duty 20'' long telescopic slider to facilitate drawer slide of steel ball bearing fixed with steel screws complete all as specified and directed by Engineer-in-charge.

Supply and fixing for Box type Steel windows/ventilator with tubular frame factory made with double shutter (wire gauged shutter & glass glazed shutter ) of size 79mm x 39mm, 16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3 mm flat iron including hinges of suitable size, steel handle, steel peg stay dovetailed or welded , 4 Nos tower bolts 100mm long ,10mm square bar grills and @75mm c/c welded to frame, on any floor and shown on drg no CEPZ/TD-245/01 & and 246/02 sheet 1/2 & 2/2 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares size n.exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with wire staples complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for GI pipe 32 mm dia light grade (in short length) as spout pipe in sunken floor slab laid in slope to brick wall with PCC (1:2:4) type B-1, complete all as specified and directed by Engineer-in-Charge.

Material and labour for 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified and directed by Engineer-in-Charge. (WPC shall be measured and paid separately)

Material and labour for bitumen blown any grade, applied hot, two coats, to concrete/plastered surfaces at the rate of 1.5 Kg per Sqm per coat and applying polythene film black, 50 micron complete for sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed by Engineer-in-Charge.

Material and labour for 25 mm thick pcc type B-1, 1:2:4 ( using 20mm graded aggregate) as in sub floors for laying floor finish complete all as specified and directed by Engineer-in-Charge.

Material and labour for Plain cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in sunken floors incl demolition to existing PCC,and complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for in repair 75 mm bore PVC pipes ISI marked in any length with or without ears laid in floor or wall with lead joints complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for in repair PVC floor trap 75 mm with anti cocroach grating, with or without hole including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for in repair 75mm dia PVC bends/hill rest bends (any radius) diminishing pieces or tapers (larger bore measured complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for PVC Branch peices, single (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75mm bore dia complete , ISI Marked, fixed in repairs complete all as specified and directed by Engineer-in-Charge.

Taking down eaves gutters and rainwater pipes 100 mm dia (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for PVC(SWR) pipes 110mm bore, single socketd , in any length with rubber ring joints , in any length fixed to walls complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for PVC (SWR) bend with ovel accessed door any radius 110mm dia bore complete all as specified and directed by Engineer-in-Charge.

Material and labour for taking down 15 mm bore GI tubing ,fitting and connections etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for taking down 20 mm bore GI tubing ,fitting and connections etc complete all as specified and directed by Engineer-in-Charge.

Refixing of old steel tubing 15/20 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 15 mm bore CPVC pipes ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 20 mm bore CPVC pipes ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for vitreous china, squatting Pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral footrest including CI 'P' or 'S' trap provision of lean concrete bedding, connection to drain out pipe and to flush pipe anti syphonage pipe etc complete including making good to floor where required complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for in repair Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern) including flush pipes, CP jet with flexible pipe including making connections to trap, and to flush pipe incl plastec seatcover closed pattern with stainless steel or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for repairs Vitreous China wash basin, white, flat back, size 450x300mm including brackets, 32 mm bore CP waste pipe long screw thread and 32 mm dia flexible waste pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for repairs Vitreous China corner type wash basin, white, of appx size 350x350mm including brackets, 32 mm bore CP waste pipe long screw thread and 32 mm dia flexible waste pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for tubular Towel rail 20mm dia CP brass 600 mm long between flange incl fixing with SS screw and rowel plug complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair for Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size not less than 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for fancy type long body Bib taps for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for fancy type pillar taps for 15 mm bore pipe, cast copper alloy with capstan heads chromium plated, screwed down high pressurewith long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair fancy type angular Stop cock/angle cock 15mm bore pipe ,CP cast copper alloy complete all as specified and directed.

Supply and fixing fancy type stainless steel shower rose of size 150mm x 150mm with arm of length 450mm, as approved by GE complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Stop valve concealed type cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs CP soap dish fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engineer-in-Charge.

Fixing only in repairs sanitary fittings including WC, Wash hand basin, wall Mixtures/centerhole mixtures of any type, Stop vaives, shower rose, bib taps etc into same or other opening incl necessary stainless steel fittings complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 20 mm bore stainless steel curtain rod with 1 mm thick wall thickness including a pair of brackets and knobs with each length/ piece, fixed on doors and windows opening for hanging curtains complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for in repair Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for rep Ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 20 mm bore iron pipe and fixed ( minimum weight 20mm -210 gms) fixed in reapirs complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for False ceiling of 9.5 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm of manufacturer M/s Saint Gobain or equivalent of Armstong /Everest including taking down existing ceiling board & grid work etc of any type/ pattern complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for for wall mount Stainless Steel palte rack (ISI Marked) of weight not less than 7 kg complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of surface by scrapping and properly cleaning the surface to remove loose particles with wire brushes and other tools, complete in all respect , along with(a) apply first coat of fibre reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibres with sun reflectivity index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 MPa and shall have crack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure , reduce surface temperature upto 10 degree celsius with 33% dilution as primming coat. (b) laying of fibre mesh of 0.3mm thickness weave in leno pattern having weight 45 gm/Sqm and pasting it properly with overlap of 50mm and allow it to dry. (c) Apply second undiluted coat @ 0.450 ltr/Sqm (d) Apply third and final coat undiluted @ 0.450Ltr/Sqm as directed by Engr-in-charge. Note : Application of water proofing treatment will be done Authorised applicator only/ or in presence of authorised rep. Certificate in this regard shall be submitted to Engr-in-charge.

Material and labour for rendering or plastering work 10 mm thick in CM 1:3 on roof surfaces and finishing the surface without using extra cement for application of roof treatment complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in benching, coping & hanuching etc complete all as specified and directed by Engineer-in-Charge.

Taking down existing roof treatment of any description including mud phuksha or PCC pedding if any (any no of layersupto the slab) including removal to dabries in low laying area exc 1.00 KM but n exc 2.00 KM complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall,fixed with self tapping screws/ l or J type hooks incl washers as required on site complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet as in ridge 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall,fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for rolled MS sections conforming to Fe-410-W(Gde-250 quality B) as in angles,flats,channels ,for cooler stand and the like, hanged on walls, complete all as specified and directed by Engineer-in-Charge.

Material and labour for cutting holes in brick/ stone walls built in cement /lime mortar for inserting holdfasts/iron frames and making good the dismanteled portionin cement concrete 1:2:4, type B1 as required of size 15 x 15x 15cm of PCC block complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75mm thick cement concrete (1:3:6) type C-2, using 40mm graded agg. as in plinth protection laid in alternate bays,incl demolition to existing PCC, complete all as specified and directed by Engineer-in-Charge.

Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron/ perimerter complete all as specified and directed by Engineer-in-Charge.

Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed by Engineer-in-Charge.

Material and labour for demolition of RCC in any position complete all as specified and directed by Engineer-in-Charge.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as specified and directed by Engineer-in-Charge.

Taking down Old/ Unserviceable MCCB/MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and directed by Engineer-in-Charge.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in Wiring with Copper conductor cables in PVC conduit of appropriate size, medium grade with sunken boxes & PVC back plate for mounting all type switches, sockets & regulators etc with front plate including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly as specified incl cutting / cheasing as required at site..Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 107 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 107 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 107 but for One light point controlled by two 2-way switches,with cables 1.5 sq. Mm size complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 107 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for piano switch 5 Amps single pole one way 230 V, 50 Hz, AC , complete all as specified and directed by Engr In charge.

Supply and fixing for piano switch 15 Amps single pole one way 230 V, 50 Hz, AC , complete all as specified and directed by Engr In charge.

Supply and fixing for Socket outlet 2 in 1, 3 pin, 6/16A, 230 V, 50 Hz, AC , complete all as specified and directed by Engr In charge.

Supply and fixing for socket piano type combination 2-in-3 pin 5 Amps flush type complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Switch piano type 2 way complete all as specified and directed by Engineer-in-Charge.

Material and labour Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge.

Supply and fixing for calling Bell ding dong 230 volts single pole 50Hz complete all as specified and directed by Engr In charge.

Material and labour for bell push 5 Amp 230 Volt AC circuit complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for electronic step type fan regulator 120 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 4 Sqmm in PVC concealed conduit/casing capping 25mm dia including PVC insulated copper conductor cable 4 Sq mm as earth lead all as specified. Including taking down old sub main wire complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Sheet metal enclosure double door type for DBs (when MCB to be used) Single pole & neutral 8 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement MCB Single pole and neutral 240 volt any rating from 40 amps"C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs LED lights fitting 1x 10W, 230V,AC white/ warm white decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs LED lights fitting 1x 20W, 230V,AC white/ warm white decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitablesize complete all as specified and directed by Engineer-in-Charge.

Lamp holder PVC/ polycarbonate type with back plate suitable for batten fittings including fitting LED Lamp 5 watt complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Bus bar chamber made out of GI sheet 2mm thick indoor type duly painted withh smoke grey spray paint over redoxide primer having aluminium bus bar of capacity 63 Amps 04 Nos maonted on insulator. The bus bar will be wall mounted and locking arrangemant complete all as specified and directed by Engineer-in-Charge.

Taking down the defective ceiling fan of any sweep and make after disconnecting electrically & mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:- (a) Servicing/overhauling the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the insulation value complete all as specified and directed by Engineer-in-Charge.

All as per item No. 130 above here in before, but re-winding the burnt/short circuited winding with same guage supper enameled copper wire to maintain speed at load complete all as specified and directed by Engineer-in-Charge.

All as per item No. 130 above here in before but applying two coats of synthetic enamel paint after preparation of surface complete all as specified and directed by Engineer-in-Charge.

Taking down the repairable exhaust fan of 300 MM / 380 MM sweep, any make, single phase, 230 volts, 50 hz, AC after disconnecting electrically and mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:- (a) Servicing/overhauling the exhuast fan by thoroughly clelaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the resistance value complete all as specified and directed by Engineer-in-Charge.

All as per item No. 133 above here in before, but re-winding the burnt/shourt circuited winding with same cauge supper enameled copper wire to maintain speed at load complete all as specified and directed by Engineer-in-Charge.

All as per item No. 133 above here in before but applying two coat of synthetic enamel paint after preparation of surface complete all as specified and directed by Engineer-in-Charge.

Supply and Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 25 Sqmm x 4 core size all as specified including taking down old cable complete all as specified and directed by Engineer-in-Charge. Note : Earth work and other connected work shall be measured & paid sperately.

Excavation in trenches and exceeding 1.5m wide and not exc 1.5m in depth in hard/ dense soil and getting out complete all as specified and directed by Engineer-in-Charge.

Returing, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed by Engineer-in-Charge.

Removing excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

Material and labour for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete all as specified and directed by Engineer-in-Charge. Note : for payment purpose punned thickness shall be measured

Material and labour Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed by Engineer-in-Charge.

Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and directed by Engineer-in-Charge.

M/S G P MARWAHA (BID ID -3067051)

Surya & Gautam Builders (BID ID -3065688)

Ashoka Engineers (BID ID -3068262)

M/S RAJESH SHARMA & CO. (BID ID -3067824)

M/S HEAVEN BUILDERS AND ENGINEERS (BID ID -3068333)

M/S V K TRADERS (BID ID -3069229)