Construction of Public Distribution Shop at Azath nagar Opposite to Masjith in ward no. 86 South Zone.

Amount

Clearing the light Jungle etc. complete as per direction of departmental officers

HGS SS.20.B. Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B (ScH.No.62) (P.No.22)

Conveyance of Surplus earth from work site to City outer with average lead of 15 km etc. complete as per direction of departmental officers

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Centering with Steel Plates including strutting,lining and levelling etc complete

a)For Plinth Beams and footings sides

b)Columns

c)Beams

RCC 1:1.5:3 mix using 20mm HBG Jelly from approved quarry

Supply and fabrication of RTS rods in various dia including cutting and bending etc

FLY ASH Brick work in cement mortar 1:5 mix (one cement five sand) using II class table molded bricks chamber burnt bricks of size 9" X 4 1/2" X 3" for the following including curing etc., completed.

Refilling the excavated earth including watering and consolidation layer by layer with all incidental charges etc complete

Filling with Well Gravel including watering and consolidation layer by layer with all incidental charges etc complete

Supply and Fixing of M.S. Door using all round 25x25x6 mm thick cross bracing 20x6 mm M.S. Flats and M.S. sheet 18g with necessary locking arrangements including one coat of Red oxide paint (0.60 x 1.85m)

Plastering for brickwork surfaces using cement mortar 1:5 (One part of cement, Five parts of sand by volume) thickness 12mm (average) for all internal/external surfaces like superstructure, rainwater ducts, elevation fin walls, manholes, inspection chambers, entrance & staircase steps etc., finished smoothly to one level including scaffolding, curing etc., complete, at all leads and at all heights.

Plastering for brickwork surfaces using cement mortar 1:3 (One part of cement, three parts of sand by volume) thickness 10mm (average) etc complete as per the direction of departmental officer

Painting with enamel paint two coats over base coat for windows and doors etc., completed

Painting with first quality emulsion paint two coats over a priming coat including thorough cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

Paving the floor with Vitrified Floor Tiles of size 60 X 60cm of approved brand and colour Marbonite tiles in all floors base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality Marbonite tiles of size 60 X 60cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc., complete complying with standard specification

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point

Supply and fixing of box type 4' 40W flourescent tube wiring complete with copper choke and condenser with TW round blocks on wall or ceiling with flurescent tube with PVC un sheathed copper leads from terminals to the fitting

Supply and fixing of 1200mm ac ceiling fan complete with elapsed electronics 300W regulator with 300mm down red on the existing clamp

Supply and erection of 2000 litre HDPE tank with water supply connection etc completed

Supply of WT bulk head fittings with guard suitable for 100W blub

Weathering course in concrete broken stone brick jelly 20mm size in pure slacked lime over RCC slab. The proporation being 32:12:5 for requuired slope and the thickness of roof as required and well beaten with wooden beaters etc., completed

Terrace flooring with one couse of pressed tiles of size 23 X 23 in cement mortar 1:3 mix with impermo oil 2% by weight of cement and pointed with same oiled mortar

Supply and Fixing of ROLLING SHUTTERS (WITH ISI MONOGRAM) Manually Operated (up to 8 sqm. Area) etc. complete as per direction of departmental officers

JAYALAKSHMI BUKDERS (BID ID -1249433)

S RAJU (BID ID -1249546)