For Shifting of HT/LT Lines and LT Sub-Stations On the Way of Under Construction 45 Mtr. Wide Road, Under Deposit Scheme (Ganga Nagar Extension Scheme) in the Area of Electricity Urban Distribution Sub-Division-XII, Under EUDD-4, Meerut.

Amount

Cartage of PCC Pole (8.5 Mtr. long) 05 No./ ST Pole (09/11 Mtr. long) 34 No. from central store to dump site with loading/unloading and from JE store/dump site to work site with loading/unloading etc.

Cartage of line material from central store to JE’s store/dump site and later on to site of works on day to day basis as per site requirement such as 11 KV cross arms, 11 KV pin with insulator, 11 KV disc. stay rod complete, stay wire, ACSR weasel conductor, G.I. wire, MS angle & MS channel all line material etc.

Construction of new plinth suitable for 250 KVA transformer (i) Excavation of earth for foundation and others (ii) Brick ballast in foundation and inner portion of plinth (iii) First class brick work for foundation and super structure (iv) Sand filling (v) Concreting in top of the plinth (vi) Plastering around the plinth.

Making of trench for laying XLPE cable 3X70 sq.mm. including providing of first class bricks.

Cartage of 33/11 KV XLPE cable/LT PVC cable of different sizes from central store to JE’s store/dump site and later on to site of works basis as per site requirement.

Erection of 11 Mtr./9 Mtr. STP pole/8.5 Mtr. 26 No. long PCC pole 05 No. as single support for 11 KV/LT line after digging of pit of proper size and all type of soil including back filling of the pole with proper ramming after completion of work of shifting of pole/line of deposit works.

Erection of double pole on PCC/STP pole after digging of pit of required size in all type of soil for each pole, including back filling of the pole with proper ramming after completion of work.

Fabrication and fixing of MS angle (65x65x6) mm. bracing with clamp and MS channel, fixing of all 11 KV accessories & base channel.

Mounting of transformer 250 KVA with proper jumpering of HT side and fixing of cable on LT side of transformers.

Erection of stay rod complete after digging of pit of required size and grouting the same in block of size 0.60x0.60x0.30 Mtr. and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming.

Laying, lifting, stringing of proper sagging of ACSR dog conductor for 3 phase 3 wire 11 KV line including binding & jumpering complete.

Water level earthing complete (Pipe type).

Making section of 11 KV line/LT line etc.

Opening/binding of consumer services.

Laying of 11 KV XLPE cable/LT PVC cable of different size as per site requirement including binding etc.

Preparation of cable ends making lead of them and filling of 11 KV XLPE cable jointing kit complete.

Dismantling of conductor of 33 KV line.

Dismantling of ST pole 11 Mtr. long.

Dismantling of line material like cross arm/channel etc.

Providing & fixing of fanshing and construction of plinth.

Laying, lifting & sagging of LT AB conductor of size 3x120, 3x95 & 3x50 mm.

Fixing of LT distribution box mounting clamp (12 No.)/LT distribution box 3P (6 No.) on support and making the proper connection.

Earthing of each 11 KV line pole properly after drive of electrodes of size 20mmx250mm and connection the earthing point with G.I. wire.

Providing & fixing of stay clamps.

Providing & fixing of LT clamps/off size all clamps.

Providing & fixing of bolts & nuts.

Providing top channel 125x65 mm. 3200 mm. width clamps.

Providing G.I. pipe 6" Inch.

Providing straight thourgh & O/D jointing kit suitable for 3x300 mm2 XLPE cable.

Providing top channel 125x65 mm. 1300 mm width clamps.

Providing I-hook ABC.

Providing 33 KV disc insulator/disc fitting/insulator/pin with nuts.

Fixing of Ms angle for brassing with clamp.

Providing red oxide paint.

Providing aluminium paint.

Concreting of pole/stay.

Cartage of dismantled all line material from site to JE store.

Providing stay set complete.