Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.6 LAccepted-AOC | ₹41.6 L | L1 | Accepted-AOC As directed by CWC, Contract Agreement is placed on the L1 Contractor M/s. Sadh Builders, Rajasthan at their revised quoted total amount of Rs. 41,61,965 /- for carrying out the subject work. |
| 2 | L2₹56.1 L+₹14.4 L (34.6%)Rejected-Finance | ₹56.1 L+₹14.4 L (34.6%) | L2 | Rejected-Finance Being L2 contractor, not accepted by CWC |
| 3 | L3₹57.9 L+₹16.3 L (39.1%)Rejected-Finance | ₹57.9 L+₹16.3 L (39.1%) | L3 | Rejected-Finance Being L3 contractor, not accepted by CWC |
| Sl No | Description | Qty | Unit | EC Enterprises L2 | SADH BUILDERS L1 | HARI ENTERPRISES L3 |
|---|---|---|---|---|---|---|
| 1.00 | Design supply, install testing & commissioning passengers lift, speed max 1.5 metre/sec, lift with single speed motor 415 volts, 3 phase, AC 50 Hz supply conforming to IS- 14665, suitable to serve G + 02 upper floors with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door) complete all as specified number of passengers 13, Specifcation sheet enclosed as Annexure - 1
(Make: Kone / Johnson / Schindler or suitably Equivalent Make) | 1 | Each | 25,50,000 ₹25,50,000 | 21,50,000 ₹21,50,000 Lowest | 31,00,000 ₹31,00,000 |
| 2.00 | Excavating in trenches not Exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying cable. | 57 | CU.M | 250 ₹14,250 Lowest | 500 ₹28,500 | 750 ₹42,750 |
| 3.00 | Material & labour for sand filling for cushioning on U.G cable | 12 | CU.M | 4,000 ₹48,000 | 1,100 ₹13,200 Lowest | 2,700 ₹32,400 |
| 4.00 | Materal &labour for Bricks; common burnt clay building bricks sub class B designation 75, Old size bricks for protection to U.G cable | 2.25 | Nos. in 1000 | 13,000 ₹29,250 | 6,000 ₹13,500 Lowest | 10,000 ₹22,500 |
| 5.00 | Returing, refilling in the excavated trench after laying of power cable including spreading levelling, watering and well ramming in layers not exc 25 cm. | 57 | CU.M | 100 ₹5,700 Lowest | 300 ₹17,100 | 100 ₹5,700 Lowest |
| 6.00 | Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 70 sqmm, 3.5 core.
(Make: GLOSTER/ Nicco/ Polycab/ Kai or suitably equivalent make) | 300 | R.M | 830 ₹2,49,000 | 750 ₹2,25,000 | 485 ₹1,45,500 Lowest |
| 7.00 | Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 120 sqmm, 3.5 core.
(Make: GLOSTER/ Nicco/ Polycab/ Kai or suitably equivalent make) | 200 | R.M | 1,250 ₹2,50,000 | 900 ₹1,80,000 | 620 ₹1,24,000 Lowest |
| 8.00 | Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 50 sqmm, 3.5 core.
(Make: GLOSTER/ Nicco/ Polycab/ Kai or suitably equivalent make) | 250 | R.M | 650 ₹1,62,500 | 600 ₹1,50,000 | 380 ₹95,000 Lowest |
| 9.00 | Material and Labour for Brick walls Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20cm girth | 50 | RM | 450 ₹22,500 | 500 ₹25,000 | 60 ₹3,000 Lowest |
| 10.00 | Supply & Fixing of wiring 2 x 2.5 sqmm + 1 x 2.5 sqmm earth wire for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit.
(Make: Finolex/Havells/Polycab/ Kundan or suitably equivalent make) | 100 | RM | 230 ₹23,000 | 150 ₹15,000 Lowest | 250 ₹25,000 |
Tender Value
₹53.7 L
EMD Value
₹1.1 L
Closing Date
5 Dec 2025, 2:00 pmClosed
THE CHIEF GENERAL MANAGER
THE CGM, HVF, AVADI, CHENNAI - 600 054
PROVISION OF PASSENGER LIFT IN AVNL CORPORATE OFFICE AT AVNL ESTATE
2025_AVNL_256204_1
HVF/TE/13025/CEO/2025-26/51
Open Tender
Electrical Works
Works
240 days
AVNL ESTATE
DETAILS ENCLOSED
9 documents required · 9 mandatory
₹0
₹1.1 L
11 Feb 2026
20 Nov 2025
6 Dec 2025
20 Nov 2025
5 Dec 2025
20 Nov 2025
Design supply, install testing & commissioning passengers lift, speed max 1.5 metre/sec, lift with single speed motor 415 volts, 3 phase, AC 50 Hz supply conforming to IS- 14665, suitable to serve G + 02 upper floors with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door) complete all as specified number of passengers 13, Specifcation sheet enclosed as Annexure - 1 (Make: Kone / Johnson / Schindler or suitably Equivalent Make)
Excavating in trenches not Exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying cable.
Material & labour for sand filling for cushioning on U.G cable
Materal &labour for Bricks; common burnt clay building bricks sub class B designation 75, Old size bricks for protection to U.G cable
Returing, refilling in the excavated trench after laying of power cable including spreading levelling, watering and well ramming in layers not exc 25 cm.
Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 70 sqmm, 3.5 core. (Make: GLOSTER/ Nicco/ Polycab/ Kai or suitably equivalent make)
Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 120 sqmm, 3.5 core. (Make: GLOSTER/ Nicco/ Polycab/ Kai or suitably equivalent make)
Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 50 sqmm, 3.5 core. (Make: GLOSTER/ Nicco/ Polycab/ Kai or suitably equivalent make)
Material and Labour for Brick walls Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20cm girth
Supply & Fixing of wiring 2 x 2.5 sqmm + 1 x 2.5 sqmm earth wire for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit. (Make: Finolex/Havells/Polycab/ Kundan or suitably equivalent make)
Supply & Fixing of wiring 2 x 4.0 sqmm + 1 x 4.0 sqmm earth wirefor circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit. (Make: Finolex/Havells/Polycab/ Kundan or suitably equivalent make)
Supply & Fixing of wiring 4 x 10.0 sqmm + 1 x 10.0 sqmm earth wire for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit (Make: Finolex/Havells/Polycab/ Kundan or suitably equivalent make)
Supply & fixing of 4 module modular white cover plate with frame
Supply & fixing of metal flush box for 4 module plate
Supply & fixing of 6 module modular white cover plate with frame
Supply & fixing of metal flush box for 6 module plate
Supply, fixing and connecting to the system modular type switch one way 16A, 1 module (Make: Legrand Myrius / Litaski/ Crabtree or Suitably equivalent make)
Supply, fixing and connecting to the system of socket, 6/16A-2/3 pin combined modular type 2 module (Make:Legrand Myrius / Litaski / Crabtree or Suitably equivalent make)
Supply fixing and connecting to the system modular type switches 10A single pole one way (Make: Legrand Myrius / Litaski/ Crabtree or Suitably equivalent make)
Supply, fixing and connecting to the system of socket, 6A-2/3 pin combined modular type 2 module (Make:Legrand Myrius / Litaski / Crabtree or Suitably equivalent make)
Supply & Fixing of Modular Fan Regulator, 120W, 2 module (Make: Legrand Myrius / Litaski/ Crabtree or Suitably equivalent make)
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), IS 374-2019 Make : Crompton - Energion Riviera/ Atomberg - Renesa Alpha/ Havells - Efficiencia Neo / Orient - Hectre 500 / Luker - Eco 28 or suitably equivalent make
Material and labour for One light point /One fan point controlled by one switch with cables1.5 sqmm size. wiring with 1.5sqmm PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 16SWG bare copper earth continuity wire. (Make: Kundan/Finolex/ Havells or suitable equivalent make)
Material and labour for One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sqmm size wiring with 1.5sqmm PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 16SWG bare copper earth continuity wire. (Make: Kundan/Finolex/ Havells or suitable equivalent make)
Material and labour for One 3 pin socket outlet 5 amps independent, with cables 2.5 sqmm size with 1.5sqmm PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 16SWG bare copper earth continuity wire. (Make: Kundan/Finolex/ Havells or suitable equivalent make)
Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning. TP 25 To 63 AMP Make: Legrand / Havells / ABB/ or suitably equivalent make
Supply & fixing of MCCB 3 pole 415 Volt, fixed type 125 Amps, with breaking capacity 16KA. Make:LEGRAND / HAVELLS / ABB or suitably equivalent make
Supply & fixing of MCCB 3 Pole , 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA Make : LEGRAND / HAVELLS / ABB or suitably equivalent make
S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make: PHILIPS / CG /Havells / Wipro / Klite/ Bajaj/ Luker or Suitably Equivalent make.
Supply & fixing of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6mm galvanised iron strip
Material & Labour for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of by using galvanised iron 32×6mm strip as eartlung lead all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion
Supply & fixing of 12 module plate with frame and metal flush box
Supply & fixing of MCBDB 4 way (DPX160+12) Legrand make as per legrand 2022 catlogue No.507745 / ABB/ Havells or suitably equivalent make)
Supply & Fixing of MCCBDB 8 way (DPX250+24). Make: Legrand or any reputed make., CAT No.507759
OUT DOOR FPB consisting of 200A MCCB-1 No for incoming, outgoing feeders are 63A MCCB-6 Nos. Specifcation sheet enclosed as Annexure -2 (1.0.1 to 1.0.9.5).
Supply, fixing & connecting of the system cable end termination of size 50 sqmm 3.5 core including with suitable cable gland & lugs.
Supply, fixing & connecting of the system cable end termination of size 120 sqmm 3.5 core including with double compression suitable cable gland & lugs.
Supply, fixing & connecting of the system cable end termination of size 70 sqmm 3.5 core including with suitable cable gland & lugs.
Earthwork excavation in hard/dense soil in trenches width and depth not exceeding 1.50 m and getting out
Earth work excavation in trenches exceeding 1.5m and not exceeding 3.0 m in width and depth and getting out in hard/dense soil.
Material and labour for sand filling in foundation including watering and consolidation.
Material & Labour for PCC 1:3:6 type C2 using 40mm graded aggregate cement concrete in foundations, filling and mass concrete
Material & Labour for R.C.C A1 Type, 1: 1.5: 3 M20, 20mm graded aggregate in foundations, including rafts, footings, column, beam, plinth beams, roof slab etc.,
Material & Labour for form work to side of RCC Members, Square/rectangular /polygenal such as columns, pillars etc., and the finishing shall be of fair finished surface.
Supply and fixing of twisted MS Bars 10mm dia and over, cut to length bent to shape required including cranking, bending, spiraling for hoping for columns, hooking ends and binding with MS Wire not less than 0.9mm dia or securing with clips.
Supply and fixing of deformed or twisted MS Bars 6mm dia up to 8mm dia cut to length bent to shape required including cranking, bending, spiraling for hoping for columns, hooking ends and binding with MS Wire not less than 0.9mm dia or securing with clips.
M & L for Brick work built in CM.1:6 using Good quality modular bricks / solid Concrete bricks Bricks.straight or curved on plan exc 6m mean radius.
M & L for plastering in CM 1:4, 15mm thick on fair faces of brick work and concrete wall surfaces.
Supply and Fixing of Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as direced by EIC.
Material and Labour for Providing edge moulding for Granite stone of 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete.
Material & Labour for painting two coats of exterior emulsion (Make APEX ULTIMA of ASIAN PAINTS) including one coat of priming paint applies after preparation of the new existing treatment
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.38 MB
BOQ_295335.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .