Providing Internal and External Electrification, AC, 40KVA Diesel Generator, 15 persons capacity stretcher cum passenger lift and 2 body mortuary cabinet of Additional Building in Government Hospital at Ottapidaram in Thoothukudi District

Amount

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End

Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting

Supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 9W LED Lamp with Bakelite holder with connection complete.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600mm down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall

Supply and fixing of louvers shutters arrangements for 300mm (12”) sweep (light duty) AC Exhaust fan

Supply and fixing of 3nos.6A two module socket , 1 no. 6/16A two module socket , 3 nos. 6A one module switch, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 32 A FP MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection. [The MCB and metal enclosure should be of Higher end

Supply and fixing of 63A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply, installation, testing and commissioning of Laminar Flow arrangements with HEPA Filters, Frames, etc. 8 ft X 6 ft for OT Ceiling Suspended provides ultra clean sterile CLASS 100 clean air and designed as per CLASS 5 OF ISO 14644-1 standards with air plenum at Aluminium powder coated 1mm thick casing with Aluminium pleat HEPA filters & 0.3 micron 99.97% efficiency and SS 304 perforated grill with 13 mm thickness XLP Insulation with Modular Housing, Frame: Aluminium, Flange type, Filter Media: Micro glass fibre, Sealant : Plolyurethane with Air flow as per standards suitable for 5.5 TR.

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 4 Nos. 40A TP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100A 4P MCB switch as incoming and 4Nos. 63A TP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal door cover flush type fitted with busbars and neutral links with single phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming

MCB and another seperate 4 way provision for accomodating one no. 4 pole RCCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush wall with earth connection only Incoming - 40A FP MCB - 1 No. Sub incoming - 40A DP RCCB (except AC type) - 3 Nos. Outgoing - 6A to 32A SP MCB - 12 Nos.

Supply and erection of 250A capacity dust and vermin proof cubical panel board of suitable size made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interior switch with bus bar chamber complete with 1"x1/4" tinned cu. Flat for 3 phases & neutral and earth connections with bus bar insulators complete with the following tinned Cu flat should be used between busbar and switches : 1"x1/4" tinned cu. Flat for interconnection of 1 No. 250A incoming switch to bus bar with interlocking arrangements, 1" 1/8" tinned cu. flat for interconnection of 2 Nos. 125A TPN switches and No.8 SWG copper conductor for interconnection of 5 Nos. 63A TPN switch for

1. 250A FP switch disconnector fuse units interior only with HRC fuses double break - 1No 2. 125A TPN switch disconnector fuse units interior only with HRC fuses double break - 2Nos 3. 100A TPN switch disconnector fuse units interior only with HRC fuses double break- 2 Nos 4. 63A TPN switch disconnector fuse units interior only with HRC fuses double break- 5 Nos

In each cubical switch, live portion of bus bar should be shrouded by 6mm thick hylem sheet sepearator, and properly earthed by tinned solid copper flat as per CEIG specifications. The earth bus with two runs of 1"x1/4" tinned copper flat must be run all round the panel to provide double earth connection

The panel should be powder coated the cable size capcity of switch loaction etc, should be marked with white paint and metalllic danger board affixed complete with mounting on base channel 3" x 1 1/2" x 1/2" iron frame work support complete (The switches make should be approved by the departmental officers before used or work.) (Incoming supply)

Supply and run of 1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in existing concealed PVC pipe with necessary connection complete

Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour (For AC Plugs and Computer Set plug)

Supply and run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm copper wire and making good of the concealed portion with suitable colour

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed portion

Supply and run of 4of 25sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 16 sq.mm copper wire and making good of the concealed portion with suitable colour

Supply and clamping of 3-1/2 x 35sq.mm PVC armoured LTUG cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and fixing of 2kVA single phase in & single phase out Online UPS of Microcontroller based High frequency and Double Conversion Online Technology with inbuilt isolation transformer system, LCD/ LED Display with suitable SMF battery to provide minimum 1 hour backup along with Powder coated MS Rack and interlink cables with following specifications:

1. Output Voltage Range : 208V/220V/230V/240V AC 2. Voltage THD (Linear Load) : ≤2% 3. Voltage THD (Non-Linear Load) : ≤4% 4. Current THD : < 10% 5. Overload : >110%, 30s turn to Bypass mode; >150% instant turn to Bypass mode 6. Short Circuit protection : 5 cycles turn off inverter, no transfer to Bypass, provide Alarm (AC mode) ; 5cycles turn off inverter, provide Alarm (Battery mode), Input fuse blown or breaker action

7. Waveform : Pure sinewave 8. Transfer time : (AC mode to Battery mode - Zero) (Inverter to bypass - <4ms) 9. Efficiency : 85% to 92% 10. Noise Level : less than 50dBA @ 1meter (with fan speed control) 11. Warranty : Two years on Electronics & one year on battery. The make and model should be approved by the departmental officers before used as work

LIFT ARRANGEMENTS Supply, erection, testing, commissioning and handing over of 1 No 15 persons capacity stretcher cum passenger gearless Lift MRL, without machine room speed 1 m/s with stainless steel panels,disable friendly microprocessor based controller, VVVF drive fire rated doors and ARD as as per the following Technical specifications

Location : Government Hospital, Ottapidaram

1. Type of lift : Stretcher cum Passenger Lift

2. Capacity of lift : 15 persons capacity (1020kg)

4. Type of Drive: Specific variable voltage variable frequency V3F drive with enhanced ride comfort and leveling functions. (Micro Processor Based)

5. No. of floors: Ground 1 floor

7. Levelling Accuracy: High level accuracy with smooth and jerk free stopping.

8. Construction of Car: 18SWG High quality stainless steel car with Neat hair line finish vinyl flooring and false ceiling.

10. No. of landing entrance: 2 nos for (G+1)floors

11. No. of car entrance: one in front only

12.Car entrance door: Power operated V3F drive side/ Centre opening sliding stainless steel scratch proof door with hair line finish.

13. Landing entrance door: centre opening stainless steel door with hair line finish with provision for emergency key opening at all landings.

14.Lift well existing: 2300mm (width) x 3000mm (depth) (As per IS 14665 Part I 2000)

15. Lift pit depth 1300mm (as per IS 14665) (part I) – 2000)

16.Car size: 1000mm (width) x 2400mmmm (Depth) as per IS 14665 (part I) – 2000)

17.Car clear opening: 800 mm width x 2000mm height (as per IS 14665) (part I) – 2000)

19.Power supply: 400/440 V, 3 phase, 50 Cycles / sec A.C. supply for power and 230 V, 50 HZ, single phase, AC supply for light.

21.Car fittings: LED (JLPL 77) & Regular (Circular) - Fan with comfortable ventilation inside the car.

22.Lift well : R.C.C. construction with brick masonry.

23. Indication: UP/Down digital direction and position indicator for all landing and in car.

24. Emergency Alarm Bell: Battery operated alarm bell to be provided with Automatic charging device

25. Emergency light: Battery operated light to be provided with Automatic charging device.

26. Fire Man’s switch: To be provided at ground floor

27. Minor builders work: included in the scope.

28. Scaffolding: Included in the scope

29. Sill angles and facia plates: included in the scope.

30. Steel for lift machinery: Included in the scope.

31. Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by lift contractor during the guarantee period of one year.

32. Automatic Rescue device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, invertor, under voltage protection system etc., complete with all accessories.

33. To be provided by the lift contractor with in-built intercom ( push type) in car panel and with provision of push type intercom in machine room and ground floor entrance.

34. Floor announciator with music with announcement in both Tamil and English.

35. Special features:

a. Infra-red door sensor with full height screen

b. Full width half height rear panel mirror.

c. Voltage stabilizer for circuit control.

d. Stainless Steel signal fixtures.

e. Vandal proof S.S. Button with S.S. cover

f. SS door frames for landing doors.

g. VF door operator.

h. Call Register signal

i. Stainless steel facia plate for car operating panel and landing fixtures.

j. On – Off switch for fan and light

k. Over load warning indicator with audio announcement

36. Other standard features: Over speed governor, phase failure and phase reversal relay alarm bell, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, electro magnetic brake with compression springs car safety gears buffer,

electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limit switch main suspension ropes counter weights lifting joint joist for mounting the machineries

37. Guarantee: Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period of not less than one year

36. Other standard features: Over speed governor, phase failure and phase reversal relay alarm bell, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, electro magnetic brake with compression springs car safety gears buffer,

electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limit switch main suspension ropes counter weights lifting joint joist for mounting the machineries

37. Guarantee: Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period of not less than one year

38.Site testing in accordance with IS 14665 should be carried out at the time of handing over

39. Supply of operation and maintenance manual with necessary tools for operation

40. Lift licence : Preparation of drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor. (G+1 floors) The make should be approved by the departmental officers before used on work.

Design, supply, installation, testing and commissioning of 5.5TR Nominal capacity DX Air-cooled Condensing unit fixed with energy efficient R410A Refrigerant scroll compressor along with grooved copper tube/aluminium fins air cooled condensor coil with anticorrosion coatings, liquid, accumulator, low noise alumimium propeller condenser fan with Fan motor etc all suitably assembled neatly in heavy duty GSS sheet metal cabinet and duly powder coated as per standard specifications. The unit to include built in safety controls like HP/LP switch power quality protector, in built thermal / temperature protection

Supply, installation, testing and commissioning of 2200 Cfm 5.5 TR Nominal capacity factory assembled double skin ceiling mounted AHU with 50mm-45kg/cum PUF Insulated detachable panels, extruded thermal break aluminium profiles filled with PUF, panel external skin with 0.6 mm preplasticized sheet, panel internal skin with 0.6mm galvanized sheet, AMCA tested DIDW backward/forward curved centrifugal fan with EFF1 rating motor, drive arrangement with taper lock pulleys for fan and motor, vibration isolators out of heavy duty rubberized mounts,

prefilters with 3ply HDPE 50mm thick filters having an efficiency of 90% 10 mic, 6row /12FPI deep DX copper cooling coil with copper header and aluminium fins ,GI mist arrestor ,condensate coil trough with SS-304-20G insulated with 9mm closed cell elastomeric foam, guard for inspection door ,out let damper of aerofoil blades &PVC gears ,and flexible fire retardant canvass complete with galvanized hardware.

Supply and filling of R410A Refrigerant Gas.

Supply and fixing of Refrigirant piping out of hard drawn copper pipe set of 28.60 mm size

Supply and fixing of Refrigirant piping out of hard drawn copper pipe set of 15.9 mm size.

Supply and fixing of flexible Canvas connection.

Supply, Fabrication and Erection of fabricated ducting made up of aluminium sheets of 22 Gauge thickness.

Supply, Fabrication and Erection of fabricated ducting made up of aluminium sheets of 24 Gauge thickness.

Supply and providing thermal insulation of 9 mm thick vidoflex with Aluminium Foil.

Supply and providing Acoustic for initial portion of Ducting with 12mm thick fiber glass rigid board covered with Tissue Paper and Aluminium Perforated Sheet.

Supply and fixing of extruded Aluminium powder Coated, supply and return Air Grilles / Diffusers with volume control dampers.

Supply, Testing Commissioning and Handing over of 40 kVA Diesel Generator set with acoustic enclosure conforming to CPCB IV+ Norms and BIS Specifications with Standard Control Panel of 0.8 P.F. Three phase 415V/ 420 Volts, 50Hz, 1500 RPM CPCB Approved capacity developing 56 HP with

acoustic enclosure water cooled clock wise rotating feed pump with 32KW/ 40KVA operating capacity brushless alternator close coupled underneath fuel tank standard safeties LLOP with stop solenoid battery with lead Electric start and vibration fitting and accessories and standard control panel as detailed below including transporting & unloading charges.

(A) Engine: Water cooled diesel engine suitable for Generator application conforming CPCBIV+ norms and IS standards with a shaft out put of 56 BHP at 1500 RPM under NTP conditions. The Engine shall comprise the following standard fitting flexible coupling fly wheel, air cleaner, fan blower, radiator, water pump, fuel filter, lubricating oil filter, etc.

(B) 12 Volt Electronic starting Equipment: Complete with starter motor, dynamo, standard batteries with cable, flexible exhaust piping of 50cms length

(C) Engine Instrument Panel / Mounted: Starting push botton / starting key, lubricating oil, temperature gauge, lubricating oil pressure gauge, water temperature gauge, safety control for low lubricating oil, pressure, safety control for high water temperature, safety control for over speed, hour meter (mechnical) and RPM indicator, battery charging ammeter. The engine should be capable of providing 10% over load for one hour for every 11 hours continuous at full load.

D)ALTERNATOR: 40kVA/32kW Capacity of brushless alternator, AC 3 phase, 50Hz, 415/420V, 0.8 PF, 1500 RPM under NTP conditions, conforming to CPCB IV+ Norms.

(E) AMF CONTROL PANEL: The AMF control panel (cubical) should be fabricated with vermin proof and dust proof best quality sheet steel and floor mounted with removable rear panels and hinged front doors with enamel painted and incorporating the following with suitable provision for connection incoming and outgoing leads having been made on the control panel.

31.Isolator to isolate the neutralNote:-1. The control panel should be complete with necessary fuses, cables, label, other accessories with neutral isolation arrangements. 2. The engine should trip for the following: a) Low lubricating oil pressure b) High water temperature c) Over speed 3.Supply and fitment of Auto Mains Failure Panel, 1 EB Service wih suitable switch and contactors SUF Control relays, timers etc suitable for auto change over of DG & EB Service.

F.FUEL TANK minimum 100 litres fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connections and mechanical fuel gauge. Fuel tank can be easily removed for cleaning or any maintenance.

G. Exhaust Gas Recirculation system arrangements as per CPCB IV+ norms as amended

H. BASE FRAME: Base frame should be fabricated with MS channel frame of rigidly welded construction for mounting of generaor set. The engine and alternator should be coupled by suitably designed diaphragm type flexible coupling with guard and mounted on the base frame with proper alignment.

I) ACOUSTIC ENCLOSURE: The Acoustic enclosure, Self standing weather proof Acoustic canopy conforming CPCBIV+ norms floor mounting type with modular construction with the provision to assemble and dismantle easily and designed to suit all weather condtions and compliance to IS standards.

Erection of acoustic enclosure suitable for 40KVA Diesel generator complete with all accessories as above and suitable supports etc. as approved by competent authority to suit updated CPCB norms.

J) Erection of generator set with proper alignment over the existing foundation.

K)Supply of manuals for operation & maintenance of DG set with warranty card etc. L) CEIG approval: Preparation of site plan physical layout, electrical line schematic Diagram 10 sets, getting drawing approval from CEIG preparation of complection report rectification report etc., arranging CEIG inspection and obtaining CEIG safety certificate, payment of CEIG inspection fees if necessary and preparation of one set of approval Drawing and copy of safety certificate in a neat frame work.

M)TESTING AND COMMISSIONING

After the installation of DG set on its foundation, the DG set should be tested and commissioned with first charging of lubrication oil to its level, first charging of battery and run the set for eight hours on full load test complete. The Genset engine and alternator make should be approved by the departmental officials before used on work.

Supply, Erection, Testing, Commissioning and Handing over of 2 Body Mortuary cabinet type as detailed below.

A) Supply, Fabrication and erection of One number PUF insulated cabinet type mortuary like Blue star Model No. BMC 406 to hold 2 bodies in 2-tier arrangement as per the following specifications and provisions.

1) External cabinet dimension of 850mm (W)X 2520 mm (D) x 1785mm (H) suitable for bodies cabinet with panel thickness not less than 60mm.

2) Insulation with 80mm thick PUF panels with 35 to 40 Kg / cu.mt.

3) Panel finish 0.55mm thick stainless steel in the front side outer and other outer and inner areas with 0.55mm thick pre-painted galvanized steel.

4) Individual doors for each body with chrome plated hinges and locks.

5) All panels to be joined together by means of tongue and groove and locked together by means of poise cam locks on each side to ensure air tightness. Foamed in PVC bubble gasket in all panels.

6) 'L' shaped corner panel in a single piece in all four corners.

7) Edges of the doors and door openings to be finished with PVC lining.

8) Electronic Temperature, Indicator cum controller, vapour proof, incandescent light fixture with lamp with plastic coated globe.

9) Pilot light to alert the personnel on the outside of the cabinet.

10) Toggle switches to operate the vapour proof light and pilot light mounted on the outside of cabinet with stainless steel cover plate protection.

B) Supply fabrication and erection of one number split mounted type roof top mounted refrigeration system to maintain +2° C to +6°C inside the 6 body mortuary cabinet with the following specifications of capacity not less than 6000 BTU / Hr. Constructed of GI panels with suitable compressor of make Kirloskar Cap land with condenser with condenser coil, evaporator with

evaporator fan motor with suction discharge and liquid refrigerant piping and expansion device etc. complete like Blue star model No. RTU 06. Operating on with power supply at 230V +/- 10 % /single phase / 50Hz AC supply.

C) Supply, fabrication and erection of 4Nos. of MS powder coated telescopic structure sliding in the fixed channel within the cabinet each to hold the weight when it is stretched fully out.

D) Supply, fabrication and fixing of 4Nos. of stainless steel trays with rollers and bush bearing to keep body on the telescopic structure inside the cabinet.

E) Providing 2" thick raised concrete platform of suitable size to keep the 4 body mortuary cabinets.

F) Providing drainage piping from the evaporator and cabinet to lead drain water just outside the cabinet room.

G) Including packing and forwarding charges.

Supply and fixing of 400mm (16") sweep wall mounting fan with suitable clamps and necessary connection complete

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry .

karthikeyan electricals (BID ID -1521467)

SRI BALAJI ELECTRICALS (BID ID -1521485)