PROVN OF OVERHEAD SHED FOR MT PROVN OF SECURITY FENCING AROUND 07XTREATMENT SHEDS IN VARIOUS CHARGES AND PROVN OF IT SERVER CUM STORE ROOM AND TELE EXCHANGE IN MAIN OFFICE AT RTS AND DEPOT SHAHARANPUR UNDER GE ROORKEE

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundations, manholes, poles/stays, cable trenches etc n.exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2 (using 40mm graded crushed stone agregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for RCC M25 (Design Mix) (20mm graded stone aggregate) in foundation, footing, plinth beam, bases for columns and mass concrete etc complete all as specified and directed.

M&L for RCC M25 (Design Mix) (20mm graded stone aggregate) as in columns, pillars, piers and similar works complete all as specified and directed.

M&L for RCC M25 (Design Mix) (20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span and similar work complete all as specified and directed.

M&L for RCC M25 (Design Mix) (20mm graded stone aggregate) as in chullah hoods, chajjas, water troughs, mangers and similar articles with plain faces and similar work complete all as specified and directed.

M&L RCC M25 (Design Mix) (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs, shelves and the like complete all as specified and directed.

Use and waste formwork to sides of concrete foundation, footing, base of columns, raft beams, sides and soffits (if any) of plinth beams and similar work (vertical or to batter) for rough finished flat concrete surfaces complete all as specified and directed.

Use and waste formwork to sides of posts, struts, piers, columns and similar work (vertical or to batter) for rough finished flat concrete surfaces complete all as specified and directed.

Use and waste formwork to sides and soffits of floor or roof beams, breassumers, cantilevers, beam haunchings, lintels and similar work for rough finished flat concrete surfaces complete all as specified and directed.

Use and waste formwork to chullah hoods, chajjas, troughs and similar work for rough finished flat concrete surfaces complete all as specified and directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, shelves and similar work n.exc 200mm thick complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per Sl item No. 14.00 above but 6 to 8mm dia bars.

All as per Sl item No. 14.00 here in before but 6 mm dia and over upto and including 10mm dia bars as in stirrups, spacers and binders.

M&L for brick work with subclass 'B' bricks straight or curved on plan exe 6mm mean radius built in cm 1:6 complete all as specified and directed.

M&L for 40mm thick damp proof course in cement concrete (1:2:4) type B0 (using 12.4mm graded stone aggregate) to horizontal or vertical surfaces including necessary form work complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm with soft/loose soil complete all as specified and directed.

Removing excavated soil at a distance n.exc 50 m and deposting where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Spreading, levelling, watering & well ramming in layers n.exc 25 cm thick of soil complete all as specified and directed.

M&L for 75 mm thick cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base, sub floor and the like complete all as specified and directed.

M&L for 30 mm cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in sub floors and the like complete all as specified and directed.

M&L for light colour (Digital colour) vitrified ceramic tiles 10 mm thick (square/ rectangular), polished, area of each tile n.exc 0.36 sqm, laid in floors over and including 15mm screed bed or bedding layer in cement mortar (1:6), set and jointed in neat grey cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors over and including 15mm screed bed or bedding layer in cement mortar (1:6), set and jointed in neat grey cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.

M&L for glazed coloured ceramic tiles 350x250x7 mm / 450x350x7 mm thick, laid in vertical surfaces such as skirting dados etc over and including 10mm thick rendering in cement mortar (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the shade complete all as specified and directed.

M&L for 12mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4) on external fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for 5mm thick rendering in cement mortar (1:3) on fair finished concrete surfaces of ceiling, finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete work surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper over a coat 3mm thick layer of wall care putty complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats cement based paint over one coat alkali resistant priming paint complete all as specified and as directed

M&L for preparation of newly plastered surfaces of ceiling and applying three coats white wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle and steel peg stay with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle and steel peg stay without glazing bars complete all as specified and directed.

S&F mild steel grills, gratings, framed guard bars and similar work conforming to Fe-290 Gde E-165, fixed to wooden frame or welded to steel frame including cutting, drilling & welding as required complete all as specified and directed.

M&L for pressed steel frame of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S&F mild steel work as in hold fasts, bands, supports, clamps, wall ties hooks including nut and bolts etc conforming to Fe-290 Gde E-165 including welding etc complete all as specified and directed.

M&L for cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in cills, copings, bed blocks, apex stones including necessary form work, filling in pressed steel frames etc complete all as specified and directed.

S&F 35mm thick 2nd hard wood factory made plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rails and stiles as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood glazed, skelton shutter, open rebated and prepared to receive glass/gauge etc (without sash bars), edges of framing plain, chamfered, rounded, fitted with cut and mitred beads, size of members of shutters as specified in SSR Part-I, Section 8 clause 8.24(a), fitted to chowkhat complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either sides & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F 100 mm size butt hinges type C21 extruded aluminium alloy with galavanised mild steel hing pin anodised and fixed complete all as specified and directed.

S&F 200 mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm size aluminium handles, cast type, anodised complete all as specified and directed.

S&F 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate and fixed complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised sliding door bolts, plate type with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 15mm bore dia GI tubing, medium grade with all fittings and fixed to walls or laid in floors etc complete all as specified and directed.

S&F 500 Ltrs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PTMT (Prayag) float valve complete all as specified and directed.

S&F 15mm dia bib tap cast coppee alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipe, single socketed, in any length with rubber ring joints, laid in trenches or floors complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipe, single socketed, in any length with rubber ring joints, laid in trenches or floors complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipe, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F vitreous china wash hand basin white, flat back, size 550x400 mm including brackets, 32mm size brass chromium plated waste fittings and 32 mm dia PVC waste pipe including cutting for and pinning in ends of brackets and fixeed complete all as specified and directed.

S&F 15mm dia bore brass chromium plated wash hand basin mixer including copper nipple for connecting with PVC connection for mixing hot & cold water, screwed for iron pipe and fixed complete all as specified and directed. Make : Prayag Cat No. 7950.

S&F vitreous china wash down water closet pan (Pedestal pattern), white with 'P' or 'S' trap including and including plastic water closet seat, closed pattern with flat bottom and cover and fixed complete all as specified and as directed.

Supply only PVC valveless, syphonic action type low level flushing cistern of 10 ltr capacity with ball valve, float and handle including bracket etc complete all as specified and directed. (Fixing charges included in item No. 57 above).

S&F 15mm dia PVC connection 450 mm long with PTMT nuts & washers at both ends complete all as specified and directed.

S&F 15 mm bore dia brass chromium plated stop valve/ angle cock, fancy type complete all as specified and directed.

S&F 15mm bore dia gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for hard core of broken bricks gauge n.exc 63mm, deposited, spread and levelled in layer n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as flooring, plinth protection, hardstanding and the like, finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concret complete all as specified and directed.

M&L for precast reinforced cement concrete (1:2:4) type B-1 (using 20 mm grade stone aggregate) as in man hole covers, set in cement mortar (1:4) complete all as specified and directed.

M&L for 60 mm thick precast machine pressed cement concrete M-35 grade interlocking paver blocks of any shape and size, conforming to IS 15658-2006 with grey cement and pigment, laid dry over 25 mm thick sand cushioning complete all as specified and directed. (Sand for cushioning shall be measured and paid for separately at supply only)

Supply only clean fine sand for laying as in cushioning for interlocking tiles and the like all as specified.

M&L for cement concrete (1:2:4) type B-1 (using 20m graded stone aggregate) as in kerbs to sides of interlocking path and the like, rounded or chamefered on edges complete all as specified and directed.

Excavation in post holes n.exc 0.5 cum each in soft/loose soil, getting out, returning filling in, ramming with concrete around and removing surplus soil to a distance n.exc 50 m complete all as specified and directed.

M&L for cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in cills, copings, bed blocks, coping around MS post above GL including necessary form work, weathering, slightly rounded or chamfered angle etc complete all as specified and directed.

S&F mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets for securing wire mesh etc and similar work conforming to Fe 290 Gde E-165 including all necessary drilling bolting or riveting etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard rails, straining bolts etc including provision of binding wire complete all as specified and directed.

Supply only mild steel galvanised chain link fencing of any type and size all as specified.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5 cm long and 5 to 10 mm dia complete all as specified and directed.

M&L mild steel round bars 10 mm dia as in stiffner for straightening chain link fencing complete all as specified and directed

M&L for mild steel framed work as in doors or gates or framed brackets of angles or tees with web and flanges, cut to shape, drilled and countersunk for screw including bending and welding angles, as necessary, gusset plates, riveting and hanging or sliding with and including either hooks and hinges or steel hanging door fittings conforming to Fe 410-W Gde-E-250 Quality-A and hanging, also fastening and fixing complete all as specified and directed.

M&L for 100 mm thick cement concrete (1:2:4) type B2 (using 40 mm graded stone aggregate) as in floor etc, laid in alternate bays, finished even and smooth without using extra cement with spike rolling or making impresson of expended metal while the concerete is green complete all as specified and directed.

S&F rolled mild steel framed work as in roof trusses, trussed purlins, crane gantries, rails and fastenings, heavy brackets, framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410 (Gde E-250 quality A) complete all as specified and directed.

S&F 0.63 mm thick mild steel galvanised corrugated sheet with grade of zinc coating 275, laid with two corrugations side lap in roof covering or in walls, fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F 0.63 mm thick mild steel galvanised corrugated sheet with grade of zinc coating 275, fixed in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed electric (FRLS) cable 1100 V grade, single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in open conduit wiring for light and fan points and concealed wiring system for socket points by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit, surface casing caping will be used) and 1.5 sqmm green PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including sunk in pressed steel terminal boxes of 1.6 mm thick (duly painted with two coats of black bituminous paint over a coat of red oxide primer (inner and outer surfaces) with and including plastic laminated bakelite sheet cover of hylam board of 2.8 mm thick including cutting holes for switches, sockets, regulators etc as per requirement including fixing with machine screws, washer etc complete all as specified and directed for the following:-

One light point controlled by one one way switch

One fan point controlled by one one way switch

One 3/5 pin socket outlet 5 Amp on the same board with other switches.

One 3/5 pin 5 Amps socket outlet on indepandant board.

One bell/buzzer point controlled by one push button

All as per Sl item No. 88.00 here in before but with 2.5 Sqmm (nominal area) FRLS cable for 15 Amp 3/5 pin socket power point including 1.5 Sqmm copper conductor green colour for earth continuity.

M&L for sub main wiring with two runs of single core PVC insulated unsheathed multistranded copper conductor (FRLS) cable of size 4.0 sqmm LT, 1100 V grade, down trhough and including adequate size PVC non metallic conduit of 20mm/appropriate dia with accessories and fittings and one run of 2.5 Sqmm single core multi stranded copper conductor cable as earth continuity conductor. Two runs of cable one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length, cable required for connection to DBs and MCBs shall be deemed included in unit rate and will not be measured separately. Earth wire shall also run inside the conduit pipe complete all as specified and directed.

S&F 5 Amps switch piano flush type polycarbonate single pole one way.

S&F 15 Amps switch piano flush type polycarbonate single pole one way.

S&F 5 Amps bell push flush type.

S&F 5 Amps socket outlet polycarbonate 2 in 1, 3 pin flush type.

S&F 15 Amps socket outlet polycarbonate 2 in 1, 3 pin flush type.

S&F ceiling rose 3 phase/PVC/polycarbonate, insulated body.

S&F bell ding dong, AC, 230 Volt, single phase complete all as specified and directed.

S&F stepped type electrronic fan regulator flush type, fixed on existing phenolic laminated sheet complete all as specified and directed.

S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings with 15 watt LED bulb PAG series B-22 base complete all as specified and directed.

S&F LED tube light fitting 1x18/20 Watt 1200mm T5 TL 6500K box type with bipin holders connector block with all accessories internally prewired including connecting up three core single wire, 01 No. 18/20 watt LED tube rod complete all as specified and directed.

S&F energy saving new generation 25W LED IP66 luminaire with high power LED and connecting with copper flexible wire three core 23/0.0076 including all necessary fixing accessories complete all as specified and directed.

S&F double door MCB distribution board of powder coated steel sheet, fitted with bus bar, neutral link, earth bar and din rail single phase and neutral confirming to IS : 13032-1991DB, 415 Volts 200 Amps rated busbar 12 way complete all as specified and directed.

S&F double door MCB distribution board of powder coated steel sheet, fitted with bus bar, neutral link, earth bar and din rail single phase and neutral confirming to IS : 13032-1991DB, 415 Volts 200 Amps rated busbar 8 way complete all as specified and directed.

S&F double door MCB distribution board of powder coated steel sheet, fitted with bus bar, neutral link, earth bar and din rail single phase and neutral confirming to IS : 13032-1991DB, 415 Volts 200 Amps rated busbar 4 way complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps 240 Volt 'B' curve, breaking capacity 10 KA, IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area including copper Lugs of suitable size complete all as specified and directed.

S&F MCB single pole and neutral ISI marked 240 Volt, 50 Hz, 40 Amps, breaking capacity 10 KA including copper Lugs of suitable size complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin earth plug and socket with one single pole MCB 20 Amps complete all as specified and directed.

S&F air cooled split unit Air Conditioner electric driven single phase of 2.0 TR capacity, BEE 5 Star rated complete all as specified and directed.

S&F air cooled split unit Air Conditioner electric driven single phase of 1.5 TR capacity, BEE 5 Star rated complete all as specified and directed.

S&F 3 KVA capacity Voltage Stabilizer for automatic operation, single phase, naturally air cooled indoor type and designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of + 2.50 % complete all as specified and directed.

S&F exhaust fan metal body electric single phase AC 220 Volts 50 Hz supply heavy duty corrosion resistant of 400mm sweep with louvers including cutting opening in wall for fixing the fan (if required) and connecting with and including 3 core flexible PVC insulated multi stranded copper conductor of size 0.5 Sqmm from ceiling rose/connector complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600x 6.0 mm thick, burried directly in natural ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and connecting to main switch or switch board complete and incl PCC masonry pit of 300x300x300mm interier diamentions in PCC 1:2:4 type B1 RCC cover with GI frame, charcoal dust and common salt 15cm in layers all round the earth plate, 20mm dia GI watering pipe, a funnel with wire mesh should be provided on top of watering pipe complete all as specified as per electric plate No 3 of SSR 2009 including testing after completion complete all as specified and directed.

Supply and laying XLPE insulated, heavy duty electric cable of cross-sectional area of cable 16 Sqmm 3 core with aluminium conductor, 1100 Volts grade complete all as specified and directed.

Supply and laying XLPE insulated, heavy duty electric cable of cross-sectional area of cable 35 Sqmm 3.5 core with aluminium conductor, 1100 Volts grade complete all as specified and directed.

Supply and laying 40 mm dia GI tubing, light grade with all fittings for cable protection including GI clamps, nut & bolts and washer etc complete all as specified and directed.

M&L for dry clean sand filling in trenches around underground cables for cushioning complete all as specified and directed. Note: Depth of sand shall be measured after punning.

Supply and laying old size sub class ‘B’ bricks, laid dry for cable protection, flat over cable, perpendicular across the cable in trenches complete all as specified and as directed.

M/s Inderlal

VERDHMAN ASSOCIATES

RAM PRAKASH AND ASSOCIATES

M/S. DEV ASSPOCIATES

RAJENDER CONSTRUCTION CO