Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.0 LAccepted-Finance MIG 674 NEW HOUSING BOARD COLONY MORENA 476001 M P | MORENA | MORENA | MADHYA PRADESH | 476001 | L1 | Accepted-Finance In order and L1 | |
| 2 | L9₹25.9 L+₹6.9 L (36.3%)Accepted-Finance | L9 | Accepted-Finance In order but L9 | |
| 3 | L2₹19.1 L+₹11,544 (0.61%)Rejected-Finance 84 ARYA NAGAR SARDHANA ROAD KANKER KHERA MEERUT 250001 | MEERUT | UTTAR PRADESH | 250001 | L2 | Rejected-Finance In order but L2 | |
| 4 | L3₹20.3 L+₹1.3 L (6.61%)Rejected-Finance C 92 JAIN NAGAR RAILWAY ROAD MEERUT UP | L3 | Rejected-Finance In order but L3 | |
| 5 | L4₹20.7 L+₹1.7 L (9.00%)Rejected-Finance | L4 | Rejected-Finance In order but L4 |
Tender Value
Refer Docs
EMD Value
₹77,000
Closing Date
7 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(U) E/M Meerut
Roorkee road Meerut Cantt
SPL REPAIR TO BLDG NO BC LINE 39 (ADM BLOCK) AT 2 COY UBSAR UNDER GE (U) MEERUT CANTT.
2023_MES_602241_1
8535/E8
Open Tender
Civil Works
Item Rate
180 days
Meerut
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE(U) E/M Meerut
₹77,000
Yes
1 Aug 2023
9 Jun 2023
10 Jul 2023
9 Jun 2023
7 Jul 2023
23 Jun 2023
Amount
Dismantling wall and ceiling boards ( fibre pulp insullation Etc) or insullation boards/ slabs blankets any thickness including cover fillets, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises,complete all as specified and directed.
Taking down Chowkats or frames not exc. 1.5 Sqm each, with shutters (without taking off shutters from the frame).
Taking down Chowkats or frames exc. 1.5 Sqm and n,exc each, with shutters (without taking off shutters from the frame).
Demolition cement concrete in ground floors and paving n,exc 15 cm thick ( below or above ground level)
Demolition brickwork or stone work built in cement mortar including all quoins arches , pillers etc,complete all as specified and directed.
Taking down cemet plaster including raking out joint hacking for key scribbing down with water,complete all as specified and directed.
M&L for brick work with fly ash bricks ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:6 complete all as specified and directed.
M&L rendering 15 mm thick on fair faces of brick work or cocrete surfacesk in cm 1:6 ,complete all as specified and directed.
M&L rendering 10 mm thick on fair faces of brick work or cocrete surfacesk in cm 1:4,complete all as specified and directed.
M&L rendering 5 mm thick as in ceiling on fair faces of brick work or cocrete surfacesk in cm 1:3,complete all as specified and directed.
S& F pressed steel framessize 125X60mm for dors with one or more rebates including necessary fixinjg lugs hings lock strike plats complete all as specified and directed.
S&F solid PVC door frame of size 50mm X 47 MM made out of 5 mm plain colour PVC sheet reinforced with M.S square tube in opening as per specification in drawing.
M&L cement concrete type B0 1:2:4 ( 12.5mm graded aggregate ) as back filling in door frame complete all as specified and directed.
S&F 35 mm thick glazed and skelton shutters open rebated and prepared to recevie gauze etc ( with out sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitered beads for secruing glass etc, sizes of members of shutters as specified in SSR Part I section 8 clause 8.24 ( a)
S&F factory made shutters 35 mm thick plain framed panelled shutter ( Two panel ) with lock rail and panel of 9 mm B.W.P commercial plt or 12 mm veneered particle board with commercila veneering on both faces ,. The size of rail and stile as per IS : 1003 ( part 1) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm trick ( style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colourPVC sheets on top rail, lock rail & bottom rail, rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the syile & rails with suitable PVC sheet beading , and jointed together with solvent cement as per specification in drawing
S&F for 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy complete all as specified and directed.
S&F for 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F for aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size complete all as specified and directed.
S&F 100 butt hings heavy weight cold rolled Sainless steeel complete all as specified and directed.
S&F 150 mm overall length of cover plate floor dooe stopper of aluminium alloy body and tougue with hard drawn steel spring complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned track or galvanised wire staples complete all as specified and directed.
S&F powder coated aluminium glazed window shutters, Three track (each shutter approx. half the size of opening with two Nos. glazed shutter and 1 No. wire gauged shutter including necessary jointing cleats for fixing etc, glazing clips, rubber packing, aluminium powder coated snap beading, screws, aluminium (powder coated ) fittings such as handle clips (suitable size), locking device, and glazing in panels with 5.0mm thick coloured/tinted glass and gauged with 0.36mm dia, 1.40mm aperture SS wire mesh using Jindal Aluminium Section Id 491, 4309, 4310, 8853, 8851, 9205 complete all as specified and shown in drg and as directed by Engineer-in-Charge. (In case of non-availability of any particular section, the highter section in terms of Kg/rm shall be provided without any extra cost to govt.
Supply only aluminium powder ( 15 micron) coated grill of approved shape with opening in grill 50mm x 50mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm
S&F aluminium fully powder ( 15 micron ) coated glazed door with shutter and frame with one or more rebates made out of JINDAL/INDAL anodised aluminium sections, shutters fixed with floor spring hinge (ISI marked) including jointing cleats for fixing etc complete all as specified with panel of 5 mm thick tinted glass (tint of glass as approved by GE), clips, rubber packing, powder coated aluminium snap beading, screws and aluminium fittings all as shown as drg No. CEAA/TD/132 sheet 1/2 and 2.2 except fixed glazing (FG) complete all as specified and directed.
S&F aluminium powder coated ( 15 micron) half glazed and half prelaminated board (Ivory) partition with frame one or more rebates made out of JINDAL/INDAL powder coated aluminium sections, including jointing cleats for fixing etc complete all as specified with panel of 6 mm thick tinted glass (tint of glass as approved by GE), clips, rubber packing, powder coated aluminium snap beading, screws and aluminium fittings all and laminated board 12mm thickness with all fittings complete all as specified and directed.
S&F anonised aluminium snap grid size 605X605 mm frame work for false ceiling including 6 mm dia GI hanger up to 2.0 m hight complete all as specified and directed.
M&L fiber cement false ceiling board/ tiles for insulation and accoustic purpose 60X60 cm in size fixed with on frame work or with staple on snap grid as in ceiling flat or sloping all as specified and directed.
ditto as per above item but except perforated board/tiles in repair ,complete all as specified and directed.
M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base of floors etc complete all as specified and directed.
M&L vitrified ceramic light glossy finish shade 10 mm thick (sqaure/rectangular) area of each tiles n.exc. 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match existing tiles and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
Ditto as per above item but on vertical surfaces over and including 10 mm thick backing coat in cm 1 : 4,complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square/rectangular ) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and over and including 15 thick screed bed in cm 1:6 complete all as specified and directed.
M&L for glazed digital ceramic coloured tiles double charged Ist quality in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.
Taking down of existing unserviceable wall lining including frame and S&F PVC wall lining con-sisting of 5 mm thick insulated PVC sheet inclusive of solvent cement and fixing at site complete all as specified and directed.
S&F in repairs for bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore.complete all as specified and directed.
S&Fin repairs stop valve 15 mm dia cast chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair 20mm dia fancy type curtain rails, stainless steel chromium including plated with fixing brackets, stops, rollers etc complete all as specified and directed.
S&F in repair PVC connection 600mm long with check nut for wash hand basin etc complete all as specified and directed.
S&F in repairs vitreous china wash basin, angle back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including bracketscomplete all as specified and directed.
S&F in repairs for pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed.
S&F in repair waste pipe of 32mm dia PVC pipe for WHB with long screwed shanks and fly nut flange end beddedd in red lead cement and other end fixed complete all as specified and directed.
S&F in repairs SS soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repairs stainless steel tubular towel rail 20mm dia D Type 60cm long between flanges
S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding, flushing cistern and flush pipe) including seat cover with hinges device complete connected to p trap complete all as specified and directed.
S&F in repairs jet spray to EWC with PVC nozzle, PVC fish plates and PVC fish plates and PVC flexible pipe complete all as specified and directed.
S&F in repairs for grating square 150mmx150mm size of PTMT complete all as specified and directed.
S&F in repairs PVC low level valveless, syphonic action type flushing cistern, low level, white, with inlet, ball , flaot valve and handle including brackets of 10 Ltr capacity complete all as specified and directed.
Taking up or down 15 mm dia steel tubing and connection incl cleaning for refining of the following bore of pipe,complete all as specified.
Taking up or down 20 mm dia steel tubing and connection incl cleaning for refining of the following bore of pipe,complete all as specified.
S&F 15 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors ,complete all as specified and directed.
Ditto but 20 mm dia of bore pipe ,complete all as specified.
Preparing new plastered or unplastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots Washing, rubbing down and stopping of distempered and painted surfaces over 1 mm thick wall care putty and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior weather proof paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified.
complete removal of existing treatment for Preparing old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots Washing, rubbing down and stopping of distempered and painted surfaces over 1 mm thick wall care putty and applying one or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior weather proof paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified.
M&L preparation of surfaces on new wooden surfaces of any description , not otherwise described over 10 cm width or girth two coat of synthetic enamel paint over one coat of pink primer complete
M&L preparation of surfaces on old wooden surfaces of any description , not otherwise described over 10 cm width or girth one coat of synthetic enamel paint over complete all as specified and directed.
M&L preparaing the surfaces on new surfaces applying two coat of distemper oil emulsion over 1 mm thick putty etc complete all as specified and directed.
M&L for prepration of new surfaces) and applying three coats of white (Lime) wash on ceiling complete all as specified and directed.
M&L for prepration of old surfaces and applying two coats of white (Lime) wash on ceiling complete all as specified and directed.
Complete removal of existing treatment on old treated surfaces of wall applying two coat of oil bond distemper over 1 mm thick of putty complete all as specified and directed.
M&L for prepration of new surfaces surfaces applying two coat of distemper over 1 mm thick of putty complete all as specified and directed.
M&L cement concrete 75 mm thick type C1 1:3:6 ( 40 mm graged aggregate) as in plinth protection complete all as specified and directed.
Demolition of cement Concrete( unreinforcement) in ground floors and pavings n exc 15 cm thickness (below or above ground level
M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded aggragate as sab base concrete complete all as specified and directed.
M&L coloured chequered cement concrete tiles 300X300X25 mm thick jointed and pointed in neat cement slurry in with grey pigmenet and pigment over and including 15 cm screed bed in cm 1:6 complete Make :- Tulip Infrastructure/Star tile Kanpur /Red Son tile Panchkula
M & L for cleaning surfaces and removal of debris, loose particles, grass etc and existing waterproofing roof treatment completely and repair the cleaned surface with (a) pcc 1:2:4 B0 ( 12.5mm graded aggregate) using extra cement for smooth finish with water proofing compound @ 3% by weight of cement (b) Providing chemical injection grounding and angle fillets (if required) and treatment of pipe entry with hybrid PU sealant dual shrinkage compensated micro concrete.(c) Applying priming coat of epoxy primer with water dilution as per manufactures instruction applying 2 coats of solvent based Polyurethyne liquid membrane not less than 500 micron trick UV having SRI valve greater than equal to 105 with consumption of 0.61 kg per sqm (each coat) (d) second coat should be applied once 1st coat becomes dry completely (Make : Asian paints/ thermax/Berger paints/Nerolec paints/Shalimar Paints) Note : (i) The work pertaining to water proofing treatment shall be executed from authorized applicator through manufacturer the material i.e. priming coat epoxy primer PU emulsion etc and approved by Garrison Engineer. (ii) The succesful bidder shall submit memorandum of understanding (MOU) with only one manufactures (iii) The rate of water proofing compound shall be included in this deemed item the cost of WPC shall not be paid sperately
Taking down carefully copper/aluminium point wiring of any type, batten or conduit, (Light, Fan, Socket or power including switch,sockets,ceiling roses,lamp holder, bell, fan regulator etc ) complete incl fittings and making good the disturbed surfaces of walls, ceiling etc in cm and applying two coats of white/colour washing/distempering etc to match the existing surface complete all as directed by Engineer - in- Charge.
Material & labour point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc,alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC conduit terminated in modular switch boards including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing for the following. [Note: - Modular switch boards shall be measured and paid separately rate for cutting chasis of walls all are included in the quated rate)
(a) One light point or one fan point or bell point controlled by one switch or bell push etc complete all as specified and directed.
(b) One 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one , one way 05/06 Amps switch etc complete all as specified and directed.
(c) One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch etc complete all as specified and directed.
All as per serial item No 2 here in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed
S & F Modular Switch 1 way 6 A, 1 module
S & F Modular Switch 1 way 16 A, 1 module
S & F Modular Socket 6 A, 2/3 pin combined 2 module
S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module
S & F Modular Fan step regulator, 120 watt, 2 module
S & F Modular Bell push 6A, 1 module
S & F Modular Blank plate, 1 module
S & F Modular type White cover plate with frame 1 module
S & F Modular type White cover plate with frame 2 module
S & F Modular type White cover plate with frame 3 module
S & F Modular type White cover plate with frame 4 module
S & F Modular type White cover plate with frame 6 module
S & F Modular type White cover plate with frame 8 module
S & F Modular type Metal Flush box 1/2 module
S & F Modular type Metal Flush box 3 module
S & F Modular type Metal Flush box 4 module
S & F Modular type Metal Flush box 6 module
S & F Modular type Metal Flush box 8 module
Supply and fixing Bell Multi Music type AC, 230 volt, single pole complete all as specified& directed.
Supply & fixing of ceiling rose surface bakelite 65x 50mm three terminals complete all as specified & directed.
Taking down unserviceable any size Tube light and recess mounted LED (10 watt and 20 watt and 36 watt) complete incl fittings and making good the disturbed surfaces of walls, ceiling etc in cm and applying two coats of white/colour washing/distempering etc to match the existing surface complete all as directed by Engineer - in- Charge.
S&F 10 watts Light emitting Diode (LED) tube light fitting wall mounting , indoor decorative aluminium extruded T5 LED battens, Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 4' long, easy to install Efficacy : 60 lumen/watt, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.
S&F 20 watts Light emitting Diode (LED) tube light fitting wall mounting, Smart indoor decorative aluminium extruded LED battens(4ft) with higher efficiency Microwave sensor based to save more energy reduces the light itensity by 70% during non-occupancy, Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 4' long, easy to install Efficacy : 100 lumen/watt, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.
S & F Recess mounted economical LED panel light 2`X2` 36 watt with high quality diffuser for uniform light with 100 lm/w housing of pressed aluminium sheeet with complete all as specified and directed.
S&F decorative wall bracket light fitting with 10 watt LED Bulb with B22d and E27 lamp holder as per sample directed by Engr-in -charge complete all as specified and directed.
Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting complete all as specified & directed
Taking out old unserviceable sub main wiring any size directed by Engr-in -Charge
M & L for sub main wiring with 4 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size etc complete all as specified and directed.
M & L for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size.
M & L sub main wiring with 6 Sqmm nominal cross sectional area, 4 core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size etc complete all as specified and directed.
Taking out carefully old unserviceable MCB/ isolator/ directed by Engr-in -Charge
Supply and fixing in replacement 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning etc complete all as specified and directed.
Supply & fixing in replacement MCB, SPN, AC, 240 volts of 40 to 63 Amps capacity 10KA, 'c' series and making connections with suitable size of copper lugs complete all as specified & directed
Supply & fixing in replacement MCB, TPN, 415 volts of 63 Amps capacity 10KA, 'c' series and making connections with suitable size of copper lugs complete all as specified & directed
Taking down old unserviceable DB Box and shwwtmetal enclouser any size directed by Engr-in -Charge
Supply & fixing MCB DB Box 4 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity.
Supply & fixing MCB DB Box 8 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity.
Supply & fixing MCB DB Box 12 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity.
Supply and fixing Sheet Metal Enclosure TPN 4 way 415 volt Double door for housing MCB's/ Isolators and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the exiting all as specified & directed including taking out old/ u/s DB's any capacity.
Supply & fixing Sheet Metal Enclosures with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps capacity 240 volts 'B' series 10KA and making connections complete all as specified & directed including taking out old u/s any capacity.
Taking out and S & F Earthing complete with galvanised MS earth plate of size 600 x 600 x 6mm thick burried directly in ground not less than 2.25 Mtr below ground level, earth plate paced on all side with charcoal mixed with salt to a thickness of 150 mm in layers, connected by GI earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion (GI earth strip will be protected by using 40mm bore GI pipe (light grade) from test point to main board. The earthing includes PCC pit chamber, RCC pit cover and frame, watering pipe 20mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance not less than 50 Mtr etc complete all as specified and shown in electrical plate No 3 of SSR Part-I .
Taking out ,Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V,size 1400mm with Min Air delivery 245 CFM and service value 6.0 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
Taking down of existing unserviceable exhaust fan plastic body 250mm and S&F exhaust fan plastic body 250mm sweep in replacement including making connections with suitable size of copper wire and making good surfaces complete all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
AR Enterprises
Rajneesh Jain
BHAGWAN DAS & Co
mohanlal gupta
M/S AGARWAL CONSTRUCTION CO.
Jay Ambay Enterprises
AEGIS INTERNATIONAL
A V ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .