CERTAIN REPAIRS REPLACEMENT TO AC SHEET ROLLING SHUTTER COLLAPSIBLE GATES CHAJJAS PARAPET WALL STEEL WINDOWS FLOOR TILES WALL TILES PLINTH PROTECTION FALSE CEILING AND CONNECTED WORKS AT DFRL MYSORE

Amount

Taking down existing external finishing of walls/ceilings of any type and any thickness and any height complete all as specified and directed by Engineer- in-Charge.

M&L for 15 mm thick plastering in CM (1:4) in two layers first coat 10mm thick and second coat 5 mm thick both coats using WPC surface finished fair and even complete all as specified and directed by Engineer in charge Note : Water proof compound will be measured and paid seprately.

Material and labour for painting to steel surfaces of any description, applying two coats of synthetic enamel paint over a coat of primer including preparation of surface complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails

M & L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section(not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

M & L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.

Taking down plain or corrugated steel sheeting any gauge thickness or pattern.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mps as in roof covering fixed with self tapping screws as specified.(Height up to 15Mtr and above/factory type bldg/Hangar)

M&L for Cleaning of service tanks by removing scales from the wall by scraping out and removing fungus inclunding complete removal of sluges accummulated at the bottom of tanks after draining out entire quantity of water from tank, washing the tanks with clear water and bleaching powder of following capacity :(Note: Cleaning will be done through machine and nanotechnology system only)

(a) 500 ltrs

(b) 1000 Ltrs

(c) 2000 Ltrs

(d) 2500 Ltrs

(e) 5000 Ltrs

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 290 (Gde-E-165) complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I.S.1611-1998 grade st-240 including painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor's workshop before fabrication complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railigl framework of water tanks and similar work conforming to Fe-290, Gde E-165 including framed and hung as gates, including pintle hinges stops, hand-made sliding bolts, etc. and for ornamental and intricate design complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.

S&F Steel rolling shutters 1.25mm, without ball bearing as specified including tip cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicate, complete push pull or manual type complete all as specified and as directed.

S & F in repairs Vitreous China squatting pan Orrisa pattern size 630*450 mm with intgegral foot rest excluding flushing cistern & flush pipe complete all as specified and as directed..Make : Hindware/ Prayag/ Parryware

Mild steel, plain, blacksheet thickness 1.6mm but in hearths;covering to door shutters; covering to doorchowkats (frames);chullah hoods; watertanks; water troughs;ducts; urinal troughsand funnels, etc. cut tosize edges beaded ifdirected, holes punched;including round headedscrews, clout nails orrivets and fixed to woodor steel members, etc.,with plain 40 mm lapjoints or welded/riveted seams includingbending, turning up,mitred angles stoppedends, outlets, etc. asrequired

S&F in repairs stainless steel kitchen rack of approx size 0.90m x 1.20m x 0.25m complete all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

S & F Aluminium anodised powder coated frames for partitions with one or more rebates including joining clit for fixing etc complete all as specified and as directed.

S & F Aluminium anodised powder coated door shutters aluminium section weighing 0.55 kg/ mtr incl necessary joining clits , glazing clips , rubber neoprene packing handles -02 nos,each door, hinges, anodised aluminium snaps, bidding screws etc complet all as specified

Supply and fix 4.8 mm thick plain sheet glass exc 0.5 sqm in each pane for aluminium partition and door complete all as specified and as directed.

M & L 12 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination both side fixed to aluminium frames complete all as specified and as directed.

S& F Mortice lock vertical type brass 4 levers size 100 mm complete all as specified and as directed.

S& F door closure hydraulically regulated desgn no. 3 universal type suitable for door shutters of 851 to 1000 mm in width and of weight betw 61 to 80 kg of aluminium extruded section complete all as specified and as directed.

M&L hardcore of guage exc. 63 mm , deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L Cement concrete type B2 1:2:4 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L Screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed.

M&L chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with white cement and pigment complete all as specified and as directed.

M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in band coping, bed plate, benching etc including slishtly rounded of chamfered angle, throating, etc complete all as specified and as directed.

M&L machine pressed precast conctet interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and as directed.

M&L for kerb stones made out of PCC 1: 2: 4 type B1 using 20mm graded stone aggregate of cross sectional size 150mm at bottom and 110 at top (tapering at length 360 mm height) with over all height 450 mm and 450mm in length surface finished even and smooth laid as directed as in path side kerb, setting in cement mortar complete all as specified and as directed.

M&L painting to concrete or plaster surface applying 2 coats of Synthetic enamel paint over a coat of primer including peparation of surface complete all as specified and as directed.

Demolition brickwork or stone/boulder masonry, built in cement mortar includng all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6mtr mean radius built in cement mortar (1:4) complete all as specified.

Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified.

M &L non skid ceramic colour tiles, 7mm thick area of each tile exc 0.18 Sqm but n exc 0.38 Sqm in floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match incl 20mm screed bed complete all as specified and as directed.

M&LGlazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thickset and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick in CM 1:3 set & joined in neat cement slurry and pointed in coloured cement to match complete all as specified.

M&L for applying exterior wall putty as per manufactures instruction and applying two coats of exterior emulsion paint (weather proof) over a coat of primerincluding removal of existing treatment on wall/ceiling surfaces including cornices, plasters etc by scrapping down with wire brushes and washing down and removing existing loose finishes particles etc all as specified and directed.

M&L distempering, distemper oil emulsion two coats over a coat of primer over chalk whiting including complete removal of existing treatment complete all as specified and as directed.

M&L applying one coat of synthetic enamel paint on old steel surfaces including preparation of surfaces complete all as specified and as directed.

M&L applying one coat of synthetic enamel paint on old wooden surfaces including preparation of surfaces complete all as specified and as directed.

M&L two coat of oil bound distemper over one coat of primer on ceiling including prepration of surfaces complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring, 40mm thick complete all as specified and as directed.

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof kerbs complete all as specified and as directed.

S&F PVC (SWR) pipe110mm bore single socketed in any length with rubber ring joint and fixed to walls indl taking down old u/s asbestos cement pipe any bore complete all as specified and as directed.

S&F PVC (SWR) bends 110mm bore any radius.

ANAND REFRIGERATION

RAHUL ENTERPRISES

JM Engineering

SRI AYYAPPA ENTERPRISES

eurekaenterprises

S CHANDRASHEKAR (SREE BUILDERS)

ARATHEERTHA CONCEPTS