Construction of 3 Nos of E-Type Residential Staff Quarter for Sub Register Chikiti in the District of Ganjam for the year 2024-25

Civil Work : Earth work in excavation of foundation in all kinds of soil including stoney earth and gravels mixed with stone boulders (except sheet rock & boulders requiring blasting) with all leads and lifts including dressing and levelling the bed and depositing the excavated materials at places away from work site with all leads including cost of all labour T&P required for the work etc complete and as per the direction of the Engineer in charge.

Supplying and filling in foundation and plinth with sand including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge.

Filling in foundation and plinth with available excavated earth including watering, ramming with cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge

Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (IMIDACHLOPRIED 30.5SC mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge.

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.

Fly Ash Brick masonry in C.M. (1:6) using 9" size in Foundation & Plinth using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge.

Fly Ash Brick masonry in C.M. (1:6) using 9" size in Super structure using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge.Ground Floor

First Floor

R.C.C. work of proportion M-20 grade having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position etc complete as per direction of Engineer-in-Charge. Column base Footing

Column Ground Floor

Column First Floor

Plinth Bend

Beam Ground Floor

Beam First Floor

Lintel Ground Floor

Lintel First Floor

Chajja Ground Floor

Chajja First Floor

Shelves Ground Floor

Shelves First Floor

Roof Slab Ground Floor

Roof Slab First Floor

Stair Case

Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge. Ground Floor

First Floor

2.5 cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm downgraded size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge Ground Floor

First Floor

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor

First Floor

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor

First Floor

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor

First Floor

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, of all materials, cost of all labour, T&P etc. required for the complete in all respect as per direction of the Engineer-in-charge.

Supplying, fitting and fixing of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar of 10mm as per approved drawing and design with cost of all materials & T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge. Ground Floor

First Floor

Painting two coats with Enamel PAINT of approved shade over a coat of primer to new wood work & iron work including sand papering to polishing to surface smooth with cost, convency, cost of all materials, taxes & labour with T&P etc. complete in all floors as per the direction of Engineer-in-charge.

First Floor

Providing & Fixing factory made 100% Solid WPC (Wood Polymer Composite) - Door frame 125mm x 65mm Single Rebated, made from Wood Polymer Composite (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade) Calcium Carbonate and Natural Fibers (Wood powder/Rice Husk/Wheat Husk) and Non toxic additives fabricated with meter joints after applying PVC solvent Cement & screwed with full bdy treaded star headed screws having minimum frame density of 780kg/cbm & an ISO 9001-2015 Certified company having good screw holding capacity (Screw Withdrawal strength of (Min 990 N) Minimum Compressive Strength of 58 N/mm2 Modulus of elasticity 900N/mm2 and resistance to spread of frame of class A category with property of being termite/borer proof, Water/Moisture Proof & Fire reterdant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length, all as per specifications drawings as directed by the Engineer-in-Charge. Material test certificate and authentification should be compulsory provided by the manufacturing company. Ground Floor

First Floor

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge. Ground Floor

First Floor

Supply and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complite with frame, shutters and all fitting and fixtures. Ground Floor

First Floor

Supplying fitting of UPVC ventilator of approved make with 6 mm thick glass of approved quality complete with frame,shutters and all fitting fixtures. Ground flooor

First Floor

Supplying, fitting and fixing of vitrified tiles in floors, treads or steps and landing on 25 mm thick bed of cement mortar (1:4) jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing and polishing etc. complete including cost, conveyance, taxes, Cess & royalities of all materials, labour with T&P complete in all respect in as per specification and direction of Engineer-in-Charge. Ground Floor

First Floor

Supplying fitting, fixing of Vetfified tile in Dado of approved make on 12 mm of thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials with all labour, T&P etc complete in all respects and as per direction of Engineer-in-Charge.

First Floor

Supplying, fitting and fixing Granite Tile (0.1 to 0.4 sqm) in floors Trades of steps & Landing with C.M.(1:1) with pigment to match the shades of the tile including cost of all materials, taxes, labour, cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge Ground Floor

First Floor

Supplying fitting, fixing of Granite tile in Dado of approved make on 12 mm of thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials with all labour, T&P etc complete in all respects and as per direction of Engineer-in-Charge.

Supplying, fitting and fixing Chequred Tile (0.1 to 0.4 sqm) in floors Trades of steps & Landing with C.M.(1:1) with pigment to match the shades of the tile including cost of all materials, taxes, labour, cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge

Painting 2 (two) coats with any approved weather coat over a coat of primer with brush to out wall surface after scraping & cleaning the surface including cost of paint, with cost, conveyance and cess, taxes of all materials and labour with T&P required for the work etc. complete in as per specification and direction of Engineer-in-Charge.Ground Floor

First Floor

Painting two coats with plastic emulsion paint to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge Ground Floor.

First Floor

E.I.Work: Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/KEI/RHINO/C&S) Group-A -L.P- 34 F.P-8 C.B.P-

Group-B L.P-35 F.P-8 C.B.P-

Group-C L.P- 20 F.P-8 C.B.P-3

Supply and fixing of 6Amp socket with 6Amp switch on existing board (Modular type )

Supply and fixing of 16Amp plug with 16Amp switch on existing board (Modular type )

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp socket and 6Amp Modular switches (1x5A S-S)connection (make-Havells/ Anchor/ Legrand /Roma/panasonic)(FOR WALL FAN CONTROL)

Supply and fixing of 3 no.sof 3pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 socket out let and S.P. 15/16 A one way modular switch (3x5A+1x15A S-S) on Modular G.I. Box with Modular Base and cover.(computer board) (make-Anchor/ Legrand /Roma/Havells/Panasonic)

Supply and fixing of 2 no.sof 3pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 socket out let and S.P. 15/16 A one way modular switch (2 nosX5A+1nosX15A S-S) on Modular G.I. Box with Modular Base and cover.(computer board) (make-Anchor/ Legrand /Roma/Havells/Panasonic)

Supply and fixing of Modular Electronics step type fan regulator (Havells / Anchor/ Usha/Bajaj)

Supply and fixing of Modular T.V Antenna socket (Modular type )

Supply and fixing of Modular Call bell push Modular type

Supply and fixing of Modular metal box of following size (nominal size) on surface/Recess with suitable size of Modular cover in front including cutting the wall and making good the same in cases of recessed conduit as required (Modular box + cover+ fixing + Labour cess) 12 Modulee( for fixing of change over/switchgear)

Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Polycab/Finolex/L&T/Anchor/Havells/V-Guard/) 2 X 1.5sq.mm +1 X 1.5sqmm

2 X 2.5sq.mm +1 X 1.5sqmm

2 X 4sq.mm +1 X 1.5sqmm.

2 X 6sq.mm +1 X 2.5sqmm.

Supply and drawing of following size PVC insulated single core multistrand copper conductor in existing surface/recessed/ steel /pvc conduit as required.2 X 1.5sqmm (Inverter)

Supply and fixing of copper plate earthing( 600 X 600 X 3.15mm )with running copper flat 25 X 5mm from copper plate to funnel of 40mm dia G.I pipe including all accessories

Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required.

Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required

Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-Hager/Havells/Legrand/Anchor/schnider 8way, Double door

12way, Double door

Supply and fixing of 5Amp to 32A rating 240V "B" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required. (make-Hager/Havells/Legrand/Anchor/schnider Single Pole (S)

Single pole and Neutral (SP&N)

40Amp DP MCB

Supply and fixing of 9Watt LED lamp (Make-Havels/Panasonic/ Philips/Bajaj/Crompton)

Supply and fixing 10watt Vintage Indoor Wall Light,Rubbed finish bronze material with covering glass Wall Light in sleek black, designed to enhance Indoor house ambiance with style and reliability modern sophistication (Make-Havels/Panasonic/ Philips/Bajaj/Crompton)

Supply and fixing of 10 watt Mirrior light with all connections.(Make-Havels/Panasonic/ Philips/Bajaj/Crompton)

S/F of 20W 4' LED fitting Surface LED Light fitting (Make-Havels/Panasonic/ Philips/Bajaj/Crompton)

S/F of 20Watt1'X1' White Square Surface LED having 100lumen/ 1 w fitting (Make-Havels/Panasonic/ Philips/Bajaj/Crompton)

S/F of 90W LED street light fitting(Make-Havels/Panasonic/ Philips/Bajaj/Crompton)

S/F of G.I. Street light Bracket with M.S. Clamp

Supply and fixing of Geyser(10ltr) make- Havells,racold,Orient, Ao smith,Vgurd/Crompton

Supply and fixing of changeover switch (Anchor/ Havells/ Apex) 32Amp double pole

S/F of 1200mm Brush Less Direct Current BLDC Ceiling fan with Low wattage consumption fan , Heavy Duty,durable, copper winding,Aluminium blade(ISI mark) Crompton Grave/Khaitan/Havells/Orient/Polycab/V-Guard

Exhaust fan 9" size

Exhaust fan 300mm

Supply of PVC/XLPE Aluminium cable (Make- Glowstar/ Polycab/ RR kable 4sq.mm 2core

Cable laying on wall surface including conduit of 25MM with steel shaddle 25sqmm

S/Fof B.H fitting CFL type complete (Bajaj/Philips with lamp

Recessed wiring for Gyser point with SP MCB enclosure ,20A/32A & socket outlet including all accesories and connection as per direction of Engineer-in-charge. make- Havells/ polycab/legrand/schneide

S/F of Metal Clad Industrial Type Plug, Socket, Interlocked Switch Socket Unit & Distribution Board. Industrial Socket with 20Amp SP MCB for AC point. make- Havells/ polycab/legrand/schneide

Supply and fixing of Stand for AC Machine with M.S. angle flat

Supply of Invertor,UPS 1650VA Pure Shine wave (Make Microtech/Su-kam/Luminous/Crompton)

Supply of Invertor Battery 12V 150AH(Make Exide/Amrom/Su-kam/Luminous/Crompton with 48 Month warranty)

Supply of Invertor Stand for double battery(Make Microtech/Su-kam/Luminous/)

Supply & Fixing of Different Ac Machine (5STAR RATED)Not acceptable of sub branding name of reputed make , Make -Daikin/Carrier/ Hitachi) with warranty of 2 years . 1.5 Ton

S/F of Stabilizer range of fluctuation voltage 90 to 280 volt 4KVA(Make - V-Guard/ Microtech/ Alfa/ L. Power)

Installation charges of AC machine

Supply and fixing of PU coated Stand for AC Machine

S/F of Copper Pipe 5/8" to 1/4"

S/F of Drain Pipe

P.H.Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C-PVC Pipes In ground floor

In first floor

25mm dia C-PVC Pipes

In first floor

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.(Supreme/Ashirvad/Oriplast) In Ground floor 25mm dia UPVC ASTM-D Pipes

32mm dia UPVC ASTM-D Pipes in first floor

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mm thick wall In Ground floor

250mm thick wall In First floor

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground floor

In First floor

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15mm dia CP two way bib cock(CON-CHR-041KN)

15 mm dia CP L.B. Bib cock(CON-CHR-107KN)

15mm dia CP angle stop cock(CON-CHR-053KN)

20mm dia CP Con. stop cock (CON-CHR-089KN)

15mm dia CP flange

15mm Cp extention piece

25mm brass full way valve

32mm brass full way valve

15mm dia C.P Pillar cock(CON-CHR-021KN)

125mmdia C.P.grating

15mm dia CP hand shower with reebit cleaning system (ABC chrome plated-Jaquar make-HSH-CHR-85537)

Over Head Shower 100mm dia round (OHS-CHR-1999)

Shower Arm (SHA-CHR-477)

600mm X 125mm C.P glass shelf (ACN -CHR-1171N)

CP towel rail (25 mm)(ACN-CHR-1111N)

C.P towel ring(ACN-CHR-1121NMI)

Corner Glass Shelf with Bracket)(ACN-CHR-1173)

CP Soap Holder

15 mm dia CP Sink Cock(CON-CHR-357KN)

Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 3.18m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. 1000litre capacity water storage tanks (Ist Floor)

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge. 110mm dia U-PVC SWR pipes(Supreme/Ashirvad)

110mm U-PVC door Tee

110mm U-PVC plain Tee

110mm U-PVC door bend

110mm U-PVC plain bend

110mm dia U-PVC off set

110mm dia U-PVC 'P' trap

110mm dia U-PVC cowl

110mm dia U-PVC clamp

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI/PVC SWR pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge. 250mm to 375mm thick wall

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral P or S trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. a.Cascade dual flushset (Hindware)No.92099

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps(Plaza make) capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. 550mmx400mm size wash hand basin with pedestall Parryware/Hind ware/Cera/Kerovit/Somany)

550mmx400mm size wash hand basin

Counter top basin 560x455 (Parryware make) white

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge. 600mmx450mm size B.E mirror

Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. 600x450x250 mm stainless steel kitchen sink- (Jayna make)

Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor

Supplying the waterproofing material Pidifin 2K of Dr.fixit on equivalent water proofing material and appling in two coat over the concrete floor and dado upto 1"-6" in wall including cleaning,applying and mending as per specification including all labour charges as per direction of Engineer-in-charge. Same as Floor tile area In 1st Floor:

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. 12mm thick CP (1:4) on bw- In gf

12mm thick CP (1:4) on bw- In First floor

Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc. complete as per direction of the Engineer in charge. (Ceramic floor tiles of premium grade Kajaria / Somany make of size 30cm x 30cm to be pre-approved by the Engineer in charge) Ground floor

(Ceramic floor tiles of premium grade Kajaria / Somany make of size 30cm x 30cm to be pre-approved by the Engineer in charge) First floor

Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles etc.complete as per direction of the Engineer in charge. (Ceramic wall tiles of premium grade Somany Daino Light(Glossy) make size 300 x 600 special plain / printed series to be pre-approved by the Engineer in charge) In ground floor (inside/outside)

(Ceramic wall tiles of premium grade Somany Daino Light(Glossy) make size 300 x 600 special plain / printed series to be pre-approved by the Engineer in charge) In First floor (inside/outside)

Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD) Casement Toilet Door – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding.The Door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like Bathroom locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges. The materials and product confirming to ASTM D 638-14, EN-477-95 and other applicable codes and standards

Supplying and fitting-fixing of UPVC Louvers fixed window/ventilator made of (small series)frame 47x50mm & mullion 47x68 mm both having wall thickness of 1.9± 0.2mm and single glazing bead of appropriate dimension(Area upto 0.75sqm) etc.all complete as per direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:1.5:3) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, fly ash bricks in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI/P-trap gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Inside size 250mmx250mm

Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm

Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 910mmx910mmx910mm

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Brick masonry soakway pit 1.40m dia x 2.00m deep

Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia u-pvc pipe alround concrete

160mm dia u-pvc pipe alround concrete

Construction of 30 users RCC septic tank (I/S size-3.00mx1.20mx2.10m) Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and levelling the bed and as per direction of the Engineer in charge.

Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.

Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs up to 4.30m height

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor

Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor

Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside)

Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside)

Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.

Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge

Sinking of 200mm x 150mm size Tube well through D.T.H or Combination drilling rigs in hard rock areas with GI/PVC casing pipes Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 200 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). Labour for drilling of 200 mm dia bore 00 mtr to 125 mtrs

150mm dia

Lowering the following size G.I/ PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above. Labour for lowering of 200mm dia casing pipe in bore 00 mtr to 45 mtrs

Cost of 200 mm dia casing Pipe

Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge.

Supplying all materials, labour, tools and plant and withdrawing casing pipes from the unsuccessful bore and depositing in the departmental store in good condition.

Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submerisble electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trail running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge 1.00H.P single phase submersible pump set (KP4-03215 pumpset CP)Kirloskar/Crompton/CRRI make

DOL Control panel

32mm dia steel short piece

Well cap

50mm size CI bracket

2.50 sqmm flat cable

Steel rope with cover

20mm dia rigid UPVC pipes

Labour charges for lowering including transportation

32mm dia HDPE pipe

Supplying all materials, labour, T&P and cutting metalled road for taking the GI pipe/sewer line through and making good to the damages including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing & electrification to submerssible pump sets and service connection including fitting fixing of electric board & Switch etc all complete as per direction of the Engineer in charge.

Supplying all materials, labour, T & P and constructing Bore well protection chamber of the inside size 650x650x1000 hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g. chips, 12mm thick cement plaster (1:4) inside and outside, RCC cover slab in (1:1.5:3) using 12 mm size h.g. chips, earthwork in excavation in all kind of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction pof the engineer in charge.