REPAIR/REPLACEMENT OF OLD UNSERVICEABLE RUSTED GI/PPR/DI PIPE LINE AND SLUICE VALVES, GATE VALVES, VALVE CHAMBER AND MAINT OF CHEMICAL DOSING SYSTEM WITH ACESSIORIES AND REPAIR/MAINT AND SERVICING OF DG SET, PUMP SET ENGINES, REPLACEMENT OF OTHER ALL

Amount

E & M Portion: Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m in depth for taking up or laying pipe in any type of soil and getting out complete all as specified and directed.

Returning, filling in trenches including spreading leveling, watering and ramming in layers not exceeding 25 cm without damaginlg pipes specials/CI specials, fittings complete all as specified and directed.

Removing of surplus spoil not exceeding 50 mtr and deposited where directed at a level not exceeding 1.50 m above the strating point complete all as specified and directed.

Supply and fixing in repair steel water tubing galvanised, medium grade with all fittings and fixed complete to walls, or in floors or laid in trenches, in old / new situation for bore of pipe complete all as specified and directed for following sizes:-

20 mm bore.

25 mm bore.

40 mm bore.

50 mm bore

80 mm bore

100 mm bore

S&F in repair Gate / globe valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed for following size:-

20 mm bore.

25 mm bore.

40 mm bore

50 mm bore

Construction of brick masonry valve pits of size 100 cm x 100 cm x 100 cm (internal dimension) complete including fabrication of mild steel cover made out of 3 mm thick MS sheet and angle iron frame made out of 40 mm x 40 mm x 6 mm thick and one side provided with hinges and another side provided with locking arrangement as per TD drawing held in the office of Engg-in-charge including dismantling the existing unserviceable valve pit complete all as specifeid and directed.

All as per item No 16 above but size 90cm x 90cm x 90cm (internal dimension) complete all as specified and directed.

Supply and fixing in repair sluice valve, PN 1.6, 100 mm bore, with by pass arrangement, complete all as specified and directed

All as per Srl item No. 18 above but 80 mm bore complete all as specified and directed.

All as per item No. 18 above but 50 mm bore complete all as specified and directed.

Supply and fixing in repair cast iron reflux valve 100 mm bore, with by pass arrangement, complete all as specified and directed

All as per Srl item No. 19 above but 80 mm bore complete all as specified and directed.

All as per item No. 19 above but 50 mm bore complete all as specified and directed.

Lifting /lowering unservicable submersible pump assembly completely any type/size up to 30 HP along with columm/delivery pipe of 50/80mm dia after disconnecting the electrical connection from the deep tube well/Dugwell of various depth, segregating components for carrying out repair work such as rewinding of burnt motor and servicing of pump etc and re-assembling after repair, lowering into the bore well, including aligning and commissioning complete all as specified and directed. Note: (a) Unit rate quoted shall deemed to include only labour for taking up & lowering the submersible pump from bore well along with delivery pipe complete (b) Repairs/rewinding of submersible pump shall be measured & paid for separately under relevant items. (c) Replacement of colummn pipe will be measured and paid for separately as supply only, under relevants items.

Transporting the unserviceable submersible pump set upto 30 HP capacity from site to nearest authorised work shop, dismantling the pump motor assembly, and rewinding the burnt motor with same gauge of PVC insulated super enamelled copper wire as per manufacturer's instruction including servicing/overhauling the pump, re-assemblying and brought back to site complete all as specified and and directed.

Supply only following spare parts for submersible pump set vertical type up to 30 HP of existing make complete all as speified and directed:-

SS impeller

Thrust bearing

Thrust plate set

Sand Guard

Stainless steel bush

Pump Shaft

Supply only column pipe 50 mm bore galvanised iron medium grade, 3 metre in length, both ends flanged and duly welded complete all as specified and directed.

Taking out the submersible pump set with motor from the existing foundation for carrying out necessary repair/servicing by replacing the unserviceable parts including fixing of new coupling (CI/rubber) as per existing upto 40 HP capacity, at site and refixing at same location incl aligning and commissioning, complete all as specified and directed.

Dismantling and taking out the centrifugal pumping set with motor from the existing foundation for carring necessary repair/ servicing by replacing the unservicable parts including fixing of new coupling (CI/rubber) as per existing all as required at site of work of capacity upto 40 HP, including re-fixing at same location including aligning and commissioning complete all as specified and directed. Note: (a) Unit rate quoted against this item shall deemed to include only labour for transportation and reapir. (b) Spares /rewinding of pump set shall be measured & paid for separately under relevant items.

Supply only following spare parts for centrifugal pump set up to 40 HP complete all as speified and directed:-

CI impellers

Diffuser

Neck ring

Shaft bush

Shaft

Roller bearing

Stuffing box gland.

Bearing 6307/6309/ 6312/7307/7308. Make SKF/SBC

Taking out wornout winding of centrifugal pump motor of capacity upto 40 HP carefully and rewinding the same with existing size of super enamelled copper winding wire, including necessary varnishing and insulating material baking etc, transportation to workshop and back to site complete all as specified and and directed by Engineer-in-Charge.

Taking down/disconnecting the existing Star Delta starter of Centrifugal / submersible pump from motor control panels of various pump houses and replace with new Star delta starter of capacity 10 HP to 25 HP, three phase, including making electric connection, complete all as specified and directed.

All as per item No. 46 above but of capacity 30 HP to 60 HP complete all as specified and and directed.

Repair of starter with disconnecting all electric connections and replacement of unsv parts like contactor, relays, coil etc and connecting to the existing pump set of capacity up to 60 HP and testing taking , complete all as specified and directed.

Supply, laying and jointing submersible cable flat Three core PVC insulated and PVC sheathed industrial copper cable of size 6 Sqmm 1100 Volts for connection from starter to motor, complete all as specified and directed.

Cleaning of under ground sump, semi under ground sump of capacity 10000 to 50000 gallons ( Drinking water sump) after bailling out of water from tank & cleaning of all sides of wall , top, bottom with fresh water, with the help of pressure jet pump ( Maxium pressure up to 120 bar ) and vacuum suctioner pump, spray of chemical for anti fungal approved by WHO on all sides of walls after cleaning and applying two coats of white wash on external surfaces and writing date of cleaning on the tank complete all as specified and directed by Engineer - in -charge .

Supply and fix in replacement manually Operated Oil Immersed Star Delta Motor Starter for 60 HP Motor, 3 phase, 415 Volt, with thermal over load relay, single phasing protection and free mechanism with single contact duly oil filled including testing and taking down old unserviceable starters complete all as specified and directed.

Supply only chlorination chemical highly efficient (high strength) calcium hypochloride 65% to 70% chlorine content based granular disinfectant more stable in sealed container, no sodium/ iron/ mercury/ heavy metal contaminations, complete all as specified and directed. Note: (i) The contractor shall produce manufacturer's test certificate and purchase vouchers of calcium based granular disinfectant. (ii) Qty shown at column 3 will not accepted at one time as the material having lesser expiry period. (iii) The calcium based granular disinfectant shall be brought at site in sealed plastic container. (iv) Calcium based granular disinfectant shall be of approved make as approved by E-in-C's branch or HQ CENC.

Testing of drinking water sample at KG stage-I, jhallas water point , FSD K Nallah, 39 RR, 169 MH, surankote dett water point and testing carried out at govt approved lab, complete all as specified and directed by Engg-in-charge.

Supply, installation, commissioning and testing of submersible pump, electric driven, 415V, TP suitable for 200 mm dia borewell (casing pipe size 150 mm) supplied and installed complete 15 HP inclusive of 40 mtr long submersible cable and fully automatic star delta starter (ASD)- HGS series extended wide band coil FRLS, internal wiring, head 150 mtr, outlet 65 mm, 15 stage, complete all as specified and directed.

Supply, installation, commissioning and testing of submersible pump, electric driven, 415V, TP suitable for 100 mm dia borewell (casing pipe size 100 mm) supplied and installed complete 15 HP inclusive of 40 mtr long submersible cable and fully automatic star delta starter (ASD)- HGS series extended wide band coil FRLS, internal wiring, head 120 mtr, outlet 50 mm, 10 stage, complete all as specified and directed.

Repair for run lead joint/ welding joint including spun yarn, welded rod, pumping/ bailing out of back flow accumulated water in trenches, burning out and taking out old lead, complete to spigot and socket cast iron/ GI pipe and fitting and cocking/ welding with suitable quantity of lead or welding rod complete of size upto 100mm bore pipe complete all as specified and directed.

Replacement of shaft with impellar of dosing pump suitable for existing at site complete all as specified and directed by Engg-in-charge.

Replacement of coil 250V, 50 HZ suitable for dosing pump as existing at site complete all as specified and directed by Engr-in-Charge.

Replacement of pump tube, suitable for dosing pump as existing at site complete all as specified and directed by Engr-in-Charge.

Replacement of white suction/discharge tube of size 3/8", suitable for dosing pump as existing at site complete all as specified and directed by Engr-in-Charge.

Replacement of ferrule of size 1/4", suitable for dosing pump as existing at site complete all as specified and directed by Engr-in-Charge.

Cast iron flanges with all fittings for following sizes complete all as specified and directed:-

100 mm bore

80 mm bore

50 mm bore

Flux cored rods of size 6010, 6011, 6013 for welding of pipe of different sizes, complete all as specified and directed by Engr-in-Charge.

Replacement of connecting nut with adaptor of size 3/8'' suitable for dosing pump suitable for existing at site complete all as specified and directed by Engr-in-Charge.

Opening of Air/water cooled DG sets upto 40 KVA capacity by unscrewing nuts, bolts and servicing of DG set, complete servicing, checking of oil, coolant, v-belts, greasing and oiling of parts and toping up , cleaning the inner & outer body, tank and radiator etc by removing sludge etc and reassembling the DG set after comprehensive maintanance of DG sets as per B check with providing qualified staff at the site which will be adequate to perform routine maint, observed and rectified minor fault if any with out any extra cost complete all as specified and directed by Engr-in-Charge. NOTES: - (i) Engine oil, oil filter, coolant replacement will be measured and paid separelty under revelant item. (ii) 'B' check shall be carried out by the authorised dealer of kirloskar/ Crompton Greaves and certificate of 'B' check shall be produced by the contractor from authorised dealer of Kirloskar / Crompton Greaves (iii) Testing equipments required for `B' check shall be of contractor's responsibility. (iv) Make of Existing DG Sets are Kirloskar, CG, cummines & Mahindra

All as per item No. 68 above but for 62.5/63 KVA DG Sets, complete all as specified and directed

All as per item No. 68 above but for but for 100/125 KVA DG Sets, complete all as specified and directed

All as per item No. 68 above but for but for Diesel engine Pump Sets upto 40 BHP, complete all as specified and directed

Dismantling and taking out of Air / water cooled Diesel Engine Generator Set of upto 40 KVA capacity , situated at various pump houses/power houses and shifting to work shop at Jammu for major engine overhauling by replacing the spare parts as required such as Piston with pin and clips, Piston ring set, Cylinder liner, 'O' rings, Cylinder head with bolts, Belts, Nozzle with holder, all type of bush & bearings, connecting rod assy, valves with guide, rocker arm with cover, oil seals, slip ring, FIP assy, carbon bush and incl any other parts reqd to repair the engine etc. and re-installation at the original location including all necessary connections, connecting to alternator, including commissioning and testing complete all as specified and directed. NOTE :- (i) Unit rate deemed to include Transport from site to Auth workshop & back to site including neccessary T&P, Labour charges required for fixing of new spare parts and testing complete. (ii) Make of Existing DG Sets are Kirloskar, CG, cummines, Mahindra & Sudhir (iii) All spare parts shall be as per existing make & model of DG sets.

All as per item No. 72 above but for but for 62.5/63 KVA DG Sets, complete all as specified and directed

All as per item No. 72 above but for but for 100/125 KVA DG Sets, complete all as specified and directed

All as per item No. 72 above but for but for Diesel engine Pump Sets upto 40 BHP, complete all as specified and directed

Supply only following spare parts are for supplied only and shall be fixed/replaced under respective item refered above and as per existing make & model suitable for DG Sets upto 40 KVA/40 BHP pump set of existing make (Kirloskar, CG, Mahindra & Sudhir) :-

Lubricant oil filter housing assembly

Lubricant oil filter

Fuel filter

Fuel filter housing

Over flow pipe assembly

Fan Belt 1158 4 PK / 1160 4 PK

Hose for air cleaner including hose clips

Fuel pipe including clips

Turbo charger center assembly complete incl impeller and turbine

Lubricant oil pump assembly

AVR Card

Water separator

Radiator assembly

PLC Unit

LLOP Switch

Injector

Supply only following spare parts and these shall be fixed/replaced under respective item refered above and as per existing make & model suitable for DG Sets upto 62.5/63 KVA of existing make (Kirloskar, CG, Mahindra & Sudhir) :-

Lubricant oil filter housing assembly

Lubricant oil filter

Fuel filter

Fuel filter housing

Over flow pipe assembly

Fan Belt 1158 4 PK / 1160 4 PK

Hose for air cleaner including hose clips

Fuel pipe including clips

Turbo charger center assembly complete incl impeller and turbine

Lubricant oil pump assembly

AVR Card

Water separator

Radiator assembly

PLC Unit

LLOP Switch

Injector

Following spare parts supply only and these shall be fixed/replaced under respective item refered above and as per existing make & model suitable for DG Sets upto 100/125 KVA of existing make (Kirloskar, CG, Mahindra & Sudhir) :-

Lubricant oil filter housing assembly

Lubricant oil filter

Fuel filter

Fuel filter housing

Over flow pipe assembly

Fan Belt 1158 4 PK / 1160 4 PK

Hose for air cleaner including hose clips

Fuel pipe including clips

Turbo charger center assembly complete incl impeller and turbine

Lubricant oil pump assembly

AVR Card

Water separator

Radiator assembly

PLC Unit

Injector

Dismantling and taking out carefully radiator assembly from DG Set of capacity upto 125 KVA for repair by flushing out of coolant, cleaning , brazing/soldering or welding etc. to stop the leakage of coolant and refixing the same after repair for smooth and efficient functioning all as directed by Engineer-in-Charge.

Taking out alternator of capacity upto 40 KVA DG sets of any make, rewinding of rotor coil with super enamelled copper wire of suitable gauge, varnishing, changing insulating material, rectifier, exciter where reqd etc. incl assembling, testing and connecting to DG set complete all as specified and directed by Engr-in-Charge Note:- Rates quoted by contractor deemed to be included the rates for tranportation of alternator from site to workshop and back.

All as per item No.127 above but for 62.5/63 KVA DG Sets, complete all as specified and directed

All as per item No.127 above but for 100/125 KVA DG Sets, complete all as specified and directed

Taking out alternator and rewinding of starter/Field coil of DG Sets upto 40 KVA capacity of any make, rewinding with super enamelled copper wire of suitable gauge, varnishing, changing insulating material, rectifier, exciter where reqd etc. incl assembling, testing and connecting to DG set complete all as specified and directed by Engr-in-Charge Note:- Rates quoted by contractor deemed to be included the rates for tranportation of alternator from site to workshop and return back.

All as per item No.130 but for 62.5/63 KVA DG Sets, complete all as specified and directed

All as per item No.130 but for 100/125 KVA DG Sets, complete all as specified and directed

Taking out cylinder head, grinding of valve sheets and polishing with abrasive parts to valve sheets of DG Set of capacity up to 125 KVA DG set of any type complete all as specified and directed by Engr-in-Charge.

Taking down FIP for overhauling by replacing all internal worn out parts & calibration of FIP complete of capacity up to 125 KVA DG set of any type by authorised dealer, complete all as specified and directed.

Replacement of old battery 12 volt, 90 AH, maintenance free complete all as specified and directed by Engr-In-charge. Make: Exide/ Amron

Replacement of old battery 12 volt, 150 AH, maintenance free complete all as specified and directed by Engr-In-charge. Make: Exide/ Amron

Replacement of old battery 12 volt, 180 AH, maintenance free complete all as specified and directed by Engr-In-charge. Make: Exide/ Amron

Supply and filling of special engine oil 20 W 40 grade all as recommended by manufacturer for first filling in the new DG sets of Make : Kirloskar/ Castrol/HP

Coolant concentrate for filling in radiator of DG set. Make of coolant : Castrol/TVS/Bosch

Taking down of unsv self starter from gen set for repair and rewinding of the same with copper wire of suitable gauge, carbon bushes, bearing, gears etc. as per existing including replacement of all necessary parts as required for repair of self starter of capacity upto 125 KVA DG Sets complete as directed by Engr-In-charge.

All as per item No.140 but for alternator, 12 Volt dinomo for charging of battery upto 125 KVA DG Sets complete all as specified and directed.

Replacement of Off-load change over switch 63 Amps 415 V , 4 pole front handle type as per site requirement complete all as specified and directed.

All as per item No. 142 but for 100 Amps 415 V , 4 pole, complete all as specified and directed.

All as per item No. 142 but for 200 Amps 415 V , 4 pole, complete all as specified and directed.

B/R Portion: Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quions, arches pillars etc, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position, complete all as specified and directed.

Dismantiling fencing wire mesh any type complete alla as specified and directed.

Dismantling posts or struts steel or RCC embedded in concrete any section including taking out embeded portion and making good distrubed groung complete all as specified and directed.

Dismantling of steel or wrought iron or mild steel, barbed wire of any description not otherwise provided for, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc incl raking out joints, hacking for key, scrubing down with water etc, complete all as specified and directed.

Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in mass concrete, filling in, foundation and flooring complete all as specified and directed.

Stone masonry walling of random rubble, well bonded, bedded and solidly hearted built in CM 1:6, uncourses, complete all as specified and directed.

All as per Ser item No 154 here-in-before but except stones ditto,complete all as specified and directed.

Brickwork with sub class B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed.

Precast cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in bond stones for walling, bed plates, anchorage blocks etc, set in CM 1:6, complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints with max depression 20mm as specified , of random rubble walling, uncoursed or brought upto courses, complete all as specified and directed.

Plain cement concrete 1:2:4 type B-1, (using 20mm graded stone aggregates) as in bed block, coping, benching and similar work including necessary form work complete all as specified and directed.

Boulder filling dry, as in backfilling for retaining wall, complete all as specified and directed.

Rendering 20mm thick in cement mortar 1:4 on other than fair faces of brick work or stone masonry surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

Flush pointing to random rubble masonry, uncoarsed, in cement mortar 1:3, complete all as specified and directed.

110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

15mm thick rendering in CM 1:4 on fair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

75 mm thick PCC 1:4:8, type D2, using 40 mm graded aggregates as in sub base in floor etc, complete all as specified and directed.

PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in surfaces channel and drain etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc, complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cu.m, getting out in any type of soil(soft/loose and hard/dense soil), returning, filling inand ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

Mild steel as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Supply Chain link MS galvanised fencing, any size or typecomplete all as specified and directed.

Fixing only chain link fencing including linewires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified.

Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, incl securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed.

Mild steel round bars 10mm dia and over Gde Fe-410 W over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild steel screw bolts (machine made) 5 to 10mm dia of nect with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5cm long (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railling; framework of water tanks and similar work conforming to Fe 290-Gde E-165 complete all as specified and directed.

MS framed work such as steel gates, including pintle hinges, stops, han made sliding bolts etc and similar work conforming to Fe 290-Gde E-165 complete all as specified and directed.

Preparation of new untreated steel and iron surfaces of any description over 10cm in girth or width not otherwise described and applying two coats of synthetic enamel paint over one coat red oxide zinc chrome primer etc, complete all as specified and directed by Engineer-in-Charge.

Applying two coats of cement base paint on walls including preparation of new plastered or un-plastered surfaces of wall complete all as specified and directed.

Cleaning/Disinfecting of PVC/ Cemented water storage tank any capacity with disinfecting chemicals (Chlorine) properly with water thoroughly flushed out, all as per specified and directed by Engr-in-Charge

Cleaning of blocked Water Closet any type/pattern (pedestal/squatt pattern) upto 1st manhole and making the drain pipe of any size full functional by flushing with water to entire satisfaction of Engr-in-Charge including cleaning of 1st manhole and removing the waste material/sludge etc to a distance n.exc 50m and burring the same in pits complete all as directed by Engr-in-Charge.(Measurement will be carried out each time depend on blockage).

All as per item 180 above but cleaning of blocked floor/nahani trap upto 1st manhole including cleaning of gully/traps complete all as specified and directed. (Measurement will be carried out each time depend on blockage).

Cleaning of underground sewage lines of size 100mm/150mm dia from manhole to manhole or from manhole to septic tank) including taking off manhole cover and cleaning of manholes of any size and depth and reomving waste material/sludge to a distance of n.exc 50m and burrying the same pit and replacing manhole cover in position after cleaning ( Measurement will be carried out each time depend on blockage ) Complete all as directed by Engr-in-Charge.

Opening of cover (of any description and size) of septic tanks and soakage wells/pits, de-sluding / de-watering contaminated with fine waste materials (liquid sludge) alongwith solid waste from septic tank and soakage wells/pits of any capacity/depth by mechanical pumping (Truck mounted mechanical machine) / manually making it fully functional to to entire satisfaction of Engineer-in- charge and and removing & depositing the sludge outside the periphery of defence land at a minimum distance of 50 m from nearby living accn and burring in borrow pits including covering with fresh mud and refixing the cover after cleaning / removing the liquid waste material of septic tanks / soakage wells / pits including cutting holes through slab/ wall where required for inserting pipe and making good the same with cement mortar to match with existing surfaces complete all as specified and directed by Engr-in-Charge.

Chequered cement concrete tiles, 30cmx30cmx25cm thick, with grey cement and pigment, set jointed and pointed in near cement slurry in floors complete including 15 mm screed bed in CM 1:4 complete all as specified and directed.

Dry Sand filing under floor complete all as specified and directed

Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-40 grade complete all as specified and directed.

Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness,M-35 grade complete all as specified and directed.

M/S Farooq Ahmed Bhat (BID ID -3469455)

VIKAS ENTERPRISES (BID ID -3471951)

M/S PARSHOTAM KUMAR GUPTA (BID ID -3477219)

M/s Rahat Traders (BID ID -3472233)