REPAIR/MAINT AND REPLACEMENT OF OLD VINTAGE CORRODED GI PIPE LINES AND CERTAIN MISC WORKS AT FATEHGARH CANTT UNDER GE FATEHGARH

Amount

Excavation in trenches n exc1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in soft/loose soil including forming bottom surface to require slope and gradient all as specified and directed

Returning, filling in, including spreading, levellling, watering and well ramming in layers not exc 25 cm in soft/loose soil all as specified and directed

Removing excavated material soil not excluding 50m and depositing where directed at the level not excluding 1.5m above the starting point all as specified and directed

Taking out/ down of 15mm bore steel water tubing and connections of any discription and any grade from trenches/floor/walls/ceiling ,including cleaning for re-fixing or removal to store,complete all as specified and directed.

Taking out/ down of 20mm bore steel water tubing and connections of any discription and any grade from trenches/floor/walls/ceiling ,including cleaning for re-fixing or removal to store,complete all as specified and directed.

Taking out/ down of 25mm bore steel water tubing and connections of any discription and any grade from trenches/floor/walls/ceiling ,including cleaning for re-fixing or removal to store,complete all as specified and directed.

Taking out/ down of 40 mm bore steel water tubing and connections of any discription and any grade from trenches e.t.c,including cleaning for re-fixing or removal to store,complete all as specified and directed.

Taking out/ down of 50mm bore steel water tubing and connections of any discription and any grade from trenches e.t.c,including cleaning for re-fixing or removal to store,complete all as specified and directed.

Taking out/ down of 80mm bore steel water tubing and connections of any discription and any grade from trenches e.t.c,including cleaning for re-fixing or removal to store,complete all as specified and directed.

Supply & Fixing 15 mm bore galvanized steel tubing , medium grade with all fittings and fixed to walls , ceilings or laid in floors, trenches complete as per IS 1239 Part-II complete all as specified and directed.

Supply & Fixing 20 mm bore galvanized steel tubing , medium grade with all fittings and fixed to walls , ceilings or laid in floors, trenches complete as per IS 1239 Part-II complete all as specified and directed.

Supply & Fixing 25 mm bore galvanized steel tubing , medium grade with all fittings and fixed to walls , ceilings or laid in floors, trenches complete as per IS 1239 Part-II complete all as specified and directed.

Supply & Fixing 40 mm bore galvanized steel tubing , medium grade with all fittings and fixed to walls , ceilings or laid in floors, trenches complete as per IS 1239 Part-II complete all as specified and directed.

Supply & Fixing 50 mm bore galvanized steel tubing , medium grade with all fittings and fixed to walls , ceilings or laid in floors, trenches complete as per IS 1239 Part-II complete all as specified and directed.

Supply & Fixing 80 mm bore galvanized steel tubing , medium grade with all fittings and fixed to walls , ceilings or laid in floors, trenches complete as per IS 1239 Part-II complete all as specified and directed.

Refixing of 15 mm bore galvanized steel tubing , medium gradewith all new fittings and fixed to walls , ceilings or laid in floors, trenches complete as per IS 1239 Part-II complete all as specified and directed. Note:-Old Pipes retrived in servicalble condition from taking down shall be used in the work.

Refixing of 20 mm bore galvanized steel tubing , medium gradewith all new fittings and fixed to walls , ceilings or laid in floors, trenches complete as per IS 1239 Part-II complete all as specified and directed. Note:-Old Pipes retrived in servicalble condition from taking down shall be used in the work.

Refixing of 25 mm bore galvanized steel tubing , medium gradewith all new fittings and fixed to walls , ceilings or laid in floors, trenches complete as per IS 1239 Part-II complete all as specified and directed. Note:-Old Pipes retrived in servicalble condition from taking down shall be used in the work.

Refixing of 40 mm bore galvanized steel tubing , medium gradewith all new fittings and fixed or laid in trenches e.t.c complete as per IS 1239 Part-II complete all as specified and directed. Note:-Old Pipes retrived in servicalble condition from taking down shall be used in the work.

Refixing of 50 mm bore galvanized steel tubing , medium gradewith all new fittings and fixed or laid in trenches e.t.c complete as per IS 1239 Part-II complete all as specified and directed. Note:-Old Pipes retrived in servicalble condition from taking down shall be used in the work.

Refixing of 80 mm bore galvanized steel tubing , medium gradewith all new fittings and fixed or laid in trenches e.t.c complete as per IS 1239 Part-II complete all as specified and directed. Note:-Old Pipes retrived in servicalble condition from taking down shall be used in the work.

S&F in repairs of cast iron sluice valve class PN 1.6 heavy duty long body both ends flanged, suitable for 80mm bore conforming to IS 14846 of 2000 duly ISI marked with wheel operated handle with high tensile stainless steel spindle, including both end joint with rubber gasket,nuts, bolts, washers etc of required size including taking out old existing unserviceable sluice valve and including making arrangement for safe working complete all as specified and directed.

S&F in repairs of cast iron sluice valve class PN 1.6 heavy duty long body both ends flanged, suitable for 100 mm bore conforming to IS 14846 of 2000 duly ISI marked with wheel operated handle with high tensile stainless steel spindle, including both end joint with rubber gasket,nuts, bolts, washers etc of required size including taking out old existing unserviceable sluice valve and including making arrangement for safe working complete all as specified and directed.

S&F in repairs of cast iron sluice valve class PN 1.6 heavy duty long body both ends flanged, suitable for 150 mm bore conforming to IS 14846 of 2000 duly ISI marked with wheel operated handle with high tensile stainless steel spindle, including both end joint with rubber gasket,nuts, bolts, washers etc of required size including taking out old existing unserviceable sluice valve and including making arrangement for safe working complete all as specified and directed.

S&F in repairs of cast iron sluice valve class PN 1.6 heavy duty long body both ends flanged, suitable for 200 mm bore conforming to IS 14846 of 2000 duly ISI marked with wheel operated handle with high tensile stainless steel spindle, including both end joint with rubber gasket,nuts, bolts, washers etc of required size including taking out old existing unserviceable sluice valve and including making arrangement for safe working complete all as specified and directed.

S&F in repairs of cast iron sluice valve class PN 1.6 heavy duty long body both ends flanged, suitable for 350 mm bore conforming to IS 14846 of 2000 duly ISI marked with wheel operated handle with high tensile stainless steel spindle, including both end joint with rubber gasket,nuts, bolts, washers etc of required size including taking out old existing unserviceable sluice valve and including making arrangement for safe working complete all as specified and directed.

S & F in replacement valve pit cover for chamber size (600mm X 600mm X 600 mm ) made out of 3mm thick mild steel plain sheet and frame work of angle iron ofsize 40mm x 40mm x 6 mm thick incl providing 4 Nos mild steel butt hinges 100 mm size and MS handle of flat iron fabricated and two coat of synthetic enamel paint over a coat of red oxide primer and including preparation of steel surfaces complete all as specified and directed

S & F in replacement valve pit cover for chamber size (900mm X 900mm X 900 mm ) made out of 3mm thick mild steel plain sheet and frame work of angle iron ofsize 40mm x 40mm x 6 mm thick incl providing 4 Nos mild steel butt hinges 100 mm size and MS handle of flat iron fabricated and two coat of synthetic enamel paint over a coat of red oxide primer and including preparation of steel surfaces complete all as specified and directed

S & F in replacement valve pit cover for chamber size (1200mm X 1200mm X1200 mm ) made out of 3mm thick mild steel plain sheet and frame work of angle iron ofsize 40mm x 40mm x 6 mm thick incl providing 4 Nos mild steel butt hinges 100 mm size and MS handle of flat iron fabricated and two coat of synthetic enamel paint over a coat of red oxide primer and including preparation of steel surfaces complete all as specified and directed

S&F in repairs of 15mm dia of Gun-metal ,Glove or gate valves ( ISI marked),with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs of 20 mm dia of Gun-metal ,Glove or gate valves ( ISI marked),with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs of 25 mm dia of Gun-metal ,Glove or gate valves ( ISI marked),with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs of 40 mm dia of Gun-metal ,Glove or gate valves ( ISI marked),with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs of 50 mm dia of Gun-metal ,Glove or gate valves ( ISI marked),with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L in replacement of 80mm dia old unserviceable sluice valve spindle with assembly of stainless steel suitable for sluice valves inlcuding nut bolts and washers pachking,new lead,gland,dori etc required for making leak proof complete all as specified and directed.

M&L in replacement of 100 mm dia old unserviceable sluice valve spindle with assembly of stainless steel suitable for sluice valves inlcuding nut bolts and washers pachking,new lead,gland,dori etc required for making leak proof complete all as specified and directed.

M&L in replacement of 150 mm dia old unserviceable sluice valve spindle with assembly of stainless steel suitable for sluice valves inlcuding nut bolts and washers pachking,new lead,gland,dori etc required for making leak proof complete all as specified and directed.

Taking out filter media complete from MGF 2600 pressure filter of capacity 35000GPH and depositing the same and removal unserviceable material to a distane n.exc 50m all as specified and directed.

M&L for scraping,cleaning and removing all scales and dirts etc from the internal surface of pressure filter and applying two coat of black bitumenous paint (suitable for application in dirinking purpose ) complete all as specified and directed.

Supply and laying filter media using following materials in layers as specified against each item starting from bottom to top filter gravel 20mm to 25 ( 1st layer from bottom )

…ditto but for filter gravel 15mm to 20 ( 2nd layer from bottom )

…ditto but for Coarse silex 6 mm to 15 mm (3rd layer from bottom)

…ditto but for Fine Silex 2.5 mm to 6 (4th layer from bottom)

Reused only Graded sand mixture of 6-14 & 16-30 BSS inside the pressure filter chamber including necessary punning down etc complete all as specified and directed.

Cleaning the external surfaces of pressure filter shell (MS) replacement of gasket and all rusted MS nut, bolts and washers of opening of pressure filter shell, preparation of steel surfaces and applying one coats of synthetic enamelled paint of grade 1st quality and approved colour to the external surfaces of pressure filter shell all as directed at site of capacity 35000 GPH capacity complete all as specified and directed.

Repair/ Maint of unserviceble air compressor of capacity 320 m3/hr , 7.5 HP , 1450 RPM including replcement of spare parts of air compressor like as Bearing, crank , air filter, fan belts , nozzles etc including rewinding of motor with testing all as specified and directed

M & L for GI flanges jointing with 2 Nos GI flanges including 04 Nos nuts, bolts, washer, rubber or lather gasket incluiding screwing and fixing complete all as specified and as directed of size.80 mm bor.

M&L in replacement of LED aviation obstruction light on OH tank 18/21 mtrs staging (on top of OH tank ) with all fittings, fixtures and accessories complete all as specified and directed. Conforming to cat part No 024973 of Bajaj makes or equivalent to other specified make.

Supply and fix in replacement of 6 Sqmm 2 core XLPE insulated armoured, heavy duty electric cable with aluminium conductor 1100 volts grade,passing through 25 mm PVC Conduit medium grade and fix on RCC OHT Staging(18/21 Mtrs) by means of MS clamp and screws complete all as specified and as directed

M & L for construction of brick masonry valve pits with sub-class 'B' brick built in cement mortar (1:4) of size (1200mm x 1200mm x 1200 mm) (internal dimension) with one brick walling and 150 cm x150 cm x 15 cm base foudation with PCC (1:4:8) using type D-2 (40mm graded stone aggregate ) rendering cement plastering 15 mm thick with cement mortar (1:4) on internal & exposed surfaces, including MS cover of size (01m x 01m) made out from 3 mm thick MS sheet including (40mm x 40mm x 5 mm) angle iron framing on MS cover as well as on top wall of the valve pit & painting of the MS cover with two coat of synthetic enamel paint over a coat of red oxide primer including necessary earth work & demolitioln of the existing old valve pit complete all as specified and as directed.

M & L for construction of brick masonry valve pits with sub-class 'B' brick built in cement mortar (1:4) of size 900 x 900 x 900 mm (internal dimension) with one brick walling and 150 cm x150 cm x 10 cm base foudation with PCC (1:4:8) using type D-2 (40mm graded stone aggregate ) rendering cement plastering 15 mm thick with cement mortar (1:4) on internal & exposed surfaces, including MS cover of size (01 m x 01 m) made out from 3 mm thick MS sheet including (40mm x 40mm x 5mm) angle iron framing on MS cover as well as on top wall of the valve pit & painting of the MS cover with two coat of synthetic enamel paint over a coat of red oxide primer including necessary earth work & demolitioln of the existing old valve pit complete all as specified and as directed.

M & L for construction of valve pits with sub-class 'B' brick built in cement mortar (1:4) of size (600mm x 600mm x 600 mm) (internal dimension) with one brick walling and (120 cm x10 cm x 10 cm) base foudation with PCC (1:4:8) using type D-2 (40mm graded stone aggregate) rendering cement plastering 15 mm thick with cement mortar (1:4) on internal & exposed surfaces, including MS cover of size 75 x 75 cm made out from 3 mm thick MS sheet including 30 x 30 x 5 mm angle iron framing on MS cover as well as on top wall of the valve pit & painting of the MS cover with two coat of synthetic enamel paint over a coat of red oxide primer including necessary earth work & demolitioln of the existing old valve all as specified and as directed.

S & F for drilling hole in existing CI/GI water main (in any position) and making arrangement for tapping water connection for 15 /20/25 mm with and including mild steel clamp of size 50 x 6 mm in existing CI/DI/GI pipeline any size,dia. with necessary nut bolts,GI tubing up to 1.5 metre long with required fittings and necessary welding works ,gasket etc complete all as specified and directed

Supply and fixing in repair of wall glow sign board size (1.5m X 0.6m X 0.3m) deep covererd in front with acrylic sheet duly writing (MES installations) as specifed and all other side covered with PGI sheet 2.0mm thick with consisting of three LED Fitting with all accessories and coduit wiring and electrical connection, on/off switching sequaence all as specifed and directed.

S&F in repair of water level indicator having indication of very low, low, middle high, and full, with magnetic float switch sensor suitable for 50,000 to 100000 Gln capacity of OHT complete all as specified and directed.( Make Benzer/Ramco or equivalent )

M&L for laying in ground wire from probe unit to controllerr of 10pair PVC copper conductor (0.5sqmm) complete all as specified and directed Make Ramco or equivalent as approved by the GE

Supply, installation and fabrication in replacement of reflective information sign board, single sided of size 16 ft x 3 ft made out of 2 mm thick aluminium sheet , pasted with blue colour back ground reflective paper, digital printed white colour lettering including marking MES Logo symbols and all fixing arrangements like nuts , bolts & washer to fix the sign board on existing steel structure incl surface preparation of existing steel structure and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S & F in repair of cast iron air release valves(ISI mark) with single air outlets of 25 mm dia bore fixed on 150 mm dia (confirming to IS-14845) pipe line complete all as specified & as directed.

S & F in repair of cast iron air release valves(ISI mark) flanged end with two air outlets of 100 mm dia bore fixed on 150 mm dia (confirming to IS-14845) pipe line complete all as specified & as directed.

S & F in repair of cast iron air release valves(ISI mark) flanged end with two air outlets of 150 mm dia bore fixed on 150 mm dia (confirming to IS-14845) pipe line complete all as specified & as directed.

M & L in repair of non-return valves(Reflex) (ISI mark) of 100 mm nominal (confirming to IS-5312) dia complete all as specified and as directed

M & L in repair of non-return valves(Reflex) (ISI mark) of 150 mm nominal dia (confirming to IS-5312) complete all as specified and as directed

M & L in repair of 100 mm bore cast iron foot valve (ISI mark) with flanged ends with GM working parts (confirming to IS-4038) including jointing materials bolts, nuts, washers & leather gasket etc complete all as specified & directed.

M & L in repair of 150 mm bore cast iron foot valve(ISI mark) with flanged ends with GM working parts (confirming to IS-4038) including jointing materials bolts, nuts, washers & leather gasket etc complete all as specified & directed.

M & L in repair of 200 mm bore cast iron butterfly valve (ISI mark) with flanged ends with (confirming to IS-13095) including jointing materials bolts, nuts, washers & leather gasket etc complete all as specified & directed.

M & L in repair of 150 mm bore cast iron butterfly valve(ISI mark) with flanged ends with (confirming to IS-13095) including jointing materials bolts, nuts, washers & leather gasket etc complete all as specified & directed.

M & L in repair of 100 mm bore cast iron butterfly valve (ISI mark) with flanged ends with (confirming to IS-13095) including jointing materials bolts, nuts, washers & leather gasket etc complete all as specified & directed

S & F in repair of 150 mm dia Hair Strainer (ISI mark) made out of cast iron with brass mesh provided with manhole cover including jointing materials bolts, nuts, washers & leather gasket etc complete all as specified & directed.

M & L for prepartaion of old steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & as directed.

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins,arches,pillars etc including removing of demolished material from work site complete all as specified and as directed

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:4) all as specified and as directed.

M & L for PCC (1:3:6) type C2 with 40 mm graded aggregate for foundation of supporting piller and base of PCC etc all as specified and directed

M & L for 15 mm thick rendering in cement morter (1:4) on fair face of brick or concrete surface finished even and fair all as specified and as directed.

M & L for painting of steel surfaces after preparation of old painted surface and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M & L writing letters or figures (Block Roman, Italic or Indian) n exc 30 cm high on 18/23 mtr staging RCC O/H Tank surface (e.g Capacity 100000 GLN) including taken down complete all as specified and directed.

M/S SRI JAGDAMBE TRADERS