Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹5.1 L
EMD Value
₹10,263
Closing Date
16 Oct 2025, 11:00 amClosed
Executive Engineer (Electrical Tender)
O/o Sr. Chief Engineer (Electrical), BSNL TamilnaduElectrical Zone, 5th Floor Tamilnadu Telecom Complex,No.60,EthirajSalai,Chennai - 600008
Replacement of EB service connection wire cable, EB metering panel and DB box at various BTS under Pondicherry BA.
2025_BSNL_251294_1
60/CEE/TNEZ/CH/2025-26
Open Tender
Electrical Works
Item Rate
30 days
Puducherry
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹10,263
17 Oct 2025
6 Oct 2025
17 Oct 2025
6 Oct 2025
16 Oct 2025
6 Oct 2025
Supplying and laying of the following size PVC insulated and PVC sheathed / XLPE Aluminium power cable of 1.1 KV grade cable in existing RCC/ HUME/ METAL pipe etc., as required.
4 X 35 sq. mm
4 X 25 sq. mm
Supplying and laying ofthe following size PVC insulated and PVC sheathed / XLPE Aluminium power cable of 1.1 KV grade cable on surface of wall etc., as required.
4 X 35 sq. mm
4 X 25 sq. mm
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
a) 4 X 35 sq. mm (32mm)
b)4 X 25 sq. mm (28mm)
Supplying and laying 40mm dia HDPE pipe of 8 Kgf/cm2 in the following manner for cable protection
Direct in ground i/c excavation,refilling and making good the surface
Supplying and fixing of SMC sheet outdoor type service connection board with IP-65 protection of size not less than 600 mm x 500 mm x 250 mm on existing MS angle iron/surface of wall i/c necessary drilling, nut bolds etc., as required.
Supplying and fixing of SMC sheet outdoor type distribution box with IP-65 protection of size not less than 325 mm x 220 mm x 150 mm on existing MS angle iron/surface of wall i/c necessary drilling, nut bolds etc., as required.
Supplying and fixing of following rating isolator /MCBs in existing DB/ Meter Box etc, as reqd
63 A Rewirable fuse cutout with base
32 A Neutral link
10 mm thick hylam sheet for meter board including cutting, drilling etc.
63A Four Pole Isolator
5- 32 A Single pole and neutral MCB
Providing & fixing GI busbar Arrangement with the following items inside the shelter for proper earthing a) 25mm x 3mm GI strip (Approx Length - 200mm-2 Nos) b) Insulator - 2Nos All the above consists of
Supply and laying of Overhead Service connection arrangement of following size PVC insulated Al. conductor wire in the following manner
4 x 16 sqmm In air with 2 run insulated GI of stay wire and PVC separator
4 x 25 sqmm In air with 2 run insulated GI of stay wire and PVC separator
4 x 16 sqmm In loose looping/existing pipe
4 x 25 sqmm In loose looping/existing pipe
Supplying and laying of following diameter 'B' class G.I. pipe in a vertical position, including all necessary alignment, supports, and fixtures. The work includes supply and fixing of L-bow, bends, and other required fittings, along with all labour for positioning, securing the pipe in place etc., as required.
a) 50 mm diameter
b) 40 mm diameter
Supplying and Laying 4 X 25 sq.mm PVC insulated single core multi strand copper conductor wire with suitable sockets in the existing PVC pipe/LT panel etc., as required.
Supplying and fixing of 40 mm dia PVC pipe (6 Kgf/cm²) along with the accessories in surface/recess including cutting the wall and making good the same necessary clamping etc required.
Supplying and fixing 3 phase cable bus bar chamber of size not less than 300mmX450mmX200mm depth with suitable size aluminium bus bar capable of not less than 100 Amp etc., as required.
Supplying / Fixing of 4 pole 63 A, ON LOAD changeover switch in sheet steel enclosure suitable for operation on 415V, 50Hz, 3 Phase AC supply including fixing on surface of wall including testing and commissioning etc., as reqd. (Make: L&T or S/S make)
Dismantling of old Electricity meter box along with accessories such as old service cable/wire etc ., as required.
Checking of electrical circuits, load balancing and co- ordination with Puducherry EB department officials for wire termination at poles EB metering panel and shutdown of EB power supply etc., as required.
Supplying and fixing of M.S steel sections of following size for fixing the existing Meter box/DB box etc., as reqd.
a) MS angle (38X38X6mm)
b) MS flate (38X6mm)
S/L of 1x10sq.mm copper wire with lug for both end for loop earthing as required
Siddarth Enterprises (BID ID -915079)
stage.html
html • 0.01 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .