REPAIRS TO FOOTPATH, HARDSTANDING, DRAIN, CULVERT, RANGES AND GRATINGS

Amount

Demolition of cement Concrete (unreinforced) in and around floors n. exc. 15cm thickness below or above ground level all as specified and deposited the debris to a distance exceeding 750m but not exceeding 1000m complete all as specified and as directed.

M&L Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base complete all as specified and as directed.

M&L Cement concrete work in pavement/ hard-standing of flexural strength 40kg/per square centimetre in field using 400 kg of cement per cubic metre,thickness of concrete 25cm or less incl finishing with mechanical finisher and brooming complete all as specified and as directed.

M&L Forming 20 mm thick expansion joints filled with pre-formed bituminous filler board and top 30mm primed and sealed with sealing compound, Grade 'A', as in 100mm thikness of concrete slab complete all as specified and as directed.

M&L Forming Contraction(Dummy) joints 65mm deep x 10mm wide, filled with Grade 'A' sealing compound for pavement complete all as specified and as directed.

Demolition of brick work masonry built in cement mortar complete all as specified and as directed.

M&L brick work with sub class B bricks old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and as directed.

M&L cement concrete 1:2:4 type B1 (20 mm graded stone aggregate) as in benching/copings complete all as specified and as directed.

M&L Rendering 15 mm thick in cm 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement all as directed.

M&L preparation of New decorated surfaces on walls and applying three coats of white wash all as specified and as directed.

Dismantling Plain or corrugated steel / galvalume sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. all as specified and as directed.

M&L Plain Cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M & L for rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates using Fe 410-W(Gde E-250) quality A complete all as specified and directed.

M & L for Joint, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) using Fe 410-W(Gde E-250) quality A complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4 type B1 using (20mm stone aggregate) in string courses, copings, kneelers, apex stones, piercaps, columns, posts,boundary pillars,bed plates, etc setting in CM (1:4) including filling of edges with cement, complete all as specified and as directed.

M&L 50mm thick sand filling under floors or in fdn incl watering and consolidation complete all as specified

M&L 60 mm thick (M-35grade) machine pressed precast concrete inter locking paver block (with grey cement and pigment) any shape and size conforming to IS 15658-2006 complete and as directed.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc including bedding complete all as specified and as directed.

M&L coloured Chequered cement concrete tiles 30cm x 30cm x 22mm thick, set, jointed and pointed in neat cement slurry in floors over screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM (1:6) with grey cement and pigment complete all as specified and as directed.

M&L Preparation of old steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L Preparation of old concrete surfaces over 10cm width or girth and applying one coat of exterior road marking emulsion paint complete all as specified and as directed.

M&L Preparation of new concrete surfaces over 10cm width or girth and applying two coats of exterior road marking emulsion all over one coat of primer complete all as specified and as directed.

M&L Preparation of old concrete/floor surfaces over 10 cm width or girth and applying one coat of exterior Floor emulsion paint complete all as specified and as directed.

Sand filling under floors or in ranges including mixing with saw dust, spreading and levelling all as specified and directed Note :- Saw dust will be measured seperately.

Supply only saw dust all as specified and as directed.

S.RAMACHANDRAN

S.T.S.CONSTRUCTIONS AGENCIES

NITHYASRI AND CO

SEMBA ELECTRICALS