REPAIR/REPLACEMENT OF SECURITY/STREET LIGHTS AT STATION UNDER GE (AF) CHABUA

Amount

Disconnecting/taking down UNSV following flood light fittings from pole/structure/Bldg. from any height and repair/checking and identifying of faulty spares, wirings, cleaning of fittings, cover, etc. and reassembling the same after repair, testing and refixing in original position and reconnecting with the electrical line complete all as directed by Engr-in-charge. Note:- (i) Materials required for replacement such as choke, ignitor, capacitor, bulb, tube etc will be measured and paid separately under relevant items. (ii) Creapers if any available on pole/structure to be removed without any extra claim. (iii) If E-N value on security fedder is high, it should be checked and rectified without any extra claim.

Replacement of open construction ballast consisting of high quality silicon steel lamination with agron welding, super enameled copper wire, vacuum impregnated with white resin, terminal block with tapping for 220/240 volts supplied suitable for 250 watt HPSV/MH light fitting complete all as specified and as directed

Replacement of open construction ballast consisting of high quality silicon steel lamination with agron welding, super enameled copper wire, vacuum impregnated with white resin, terminal block with tapping for 220/240 volts supplied suitable for 150 watt HPSV/MH light fitting complete all as specified and as directed

Replacement of open construction ballast consisting of high quality silicon steel lamination with agron welding, super enameled copper wire, vacuum impregnated with white resin, terminal block with tapping for 220/240 volts supplied suitable for 70 watt HPSV/MH light fitting complete all as specified and as directed

Replacement of 70 watt metal halide double ended tubular clear lamp complete all as per cat no 148033 of Make : Bajaj or its equivalent in approved make

Replacement of 150 watt metal halide double ended tubular clear lamp complete all as per cat no 148034 of Make : Bajaj or its equivalent in approved make

Replacement of 70 watt metal halide single ended tubular clear lamp complete all as per cat no 148036 of Make : Bajaj or its equivalent in approved make

Replacement of 150 watt metal halide single ended tubular clear lamp complete all as per cat no 148037of Make : Bajaj or its equivalent in approved make

Replacement of 250 watt metal halide single ended tubular clear lamp complete all as per Cat No 140034 of Make : Bajaj or its equivalent in approved make

Replacement of ignitors, 180V - 240V, 50 Hz, suitable for HPSV/MH lamp complete all as per Cat No BJIGN MH A of Make : Bajaj or its equivalent in approved make

Replacement of thread type lamp holder suitable for 150/250 watt SON/MH fitting complete all as directed.

M & L for replacement of LED aviation light luminaries comprising of aluminium housing with polycarbonate enclosure with 302 Nos LED complete after taking down the old unserviceable one all as per cat no BGAV 302 LED of Make : Bajaj or its equivalent in approved make

M & L for replacement flood light mounted on high mast light of 100 Watt energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66, suitable for highlighting architectural facade and general purpose lighting, after taking down the old unserviceable one complete as per Make:Havells Jeta IRIS 100W or equivalent model of approved make.

M & L for replacement of streetlight energy saving & environmental friendly long life Versatile pressure die-cast aluminium roadway luminaire with high power 25 W LED, Make :Havells(cat no Endura Pearl MP25W or equivalent model of approved make after taking down the old unserviceable one complete all as directed specified and directed.

M & L for replacement of streetlight energy saving & environmental friendly long life Versatile pressure die-cast aluminium roadway luminaire with high power 30 W LED, Make:Havells cat no Endura Pearl MP30 or equivalent model of approved make after taking down the old unserviceable one complete all as directed specified and directed.

M & L for replacement of 48 Watt LED streetlight made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection, impact resistance of IK07 & 10 KV external sPd, Make :Havells (cat no.LHETAXU7PN6W048) or equivalent model of approved make after taking down the old unserviceable one complete all as directed specified and directed.

M & L for replacement of 50 Watt energy saving iP65 flood light luminaire with high power COB LED as light source fixed on volleyball/badminton/basket ball court and football ground, Make : Havells (cat no. LHEPBFUEN6W050) or equivalent model of approved make after taking down the old unserviceable one complete all as directed specified and directed.

S&F Integral decorative 40 watt LED bollard with clear opal acrylic diffuser with IP-65 protection including lamp and electrically connected with suitable size copper wire including taking down unserviceable light fittings of any description complete all as specified and as directed. (Make: Cat No. bdcl 40 W of BAJAJ or equivalent model of approved make complete all as directed specified and directed.

Supply and fix in repairs of LED bollard in decorative mushroom shape with IP 65 protection warm white 9watt, Make :Bajaj BLBMC 9 W LED or equivalent model of approved make after taking down the old unserviceable one complete all as directed specified and directed.

Supply and fix in repairs of LED bollard in rectangular shaped Victorian design with opal acrylic diffuser and IP 65 protection complete all as per Make : Havells; Minimount 10w or equivalent model of approved make after taking down the old unserviceable one complete all as directed specified and directed.

Material and labour for post top lantern post, cut to length of 1 mtr height, made out of 65 mm bore light grade GI pipe including taking down the old unserviceable one complete all as specified and directed.

Disconnecting/taking down UNSV following LED flood light fittings from pole/structure/Bldg. from any height and repair/checking and identifying of faulty spares, wirings, cleaning of fittings, cover, etc. and reassembling the same after repair, testing and refixing in original position and reconnecting with the electrical line complete all as directed by Engr-in-charge. Note:- (i) Materials required for replacement such as driver, wires,. etc will be measured and paid separately under relevant items. (ii) Creapers if any available on pole/structure to be removed without any extra claim. (iii) If E-N value on security fedder is high, it should be checked and rectified without any extra claim.

Supply and fix in repairs 'ICON' electronic LED driver suitable for 25 watt LED street light, cat no : BRLED 25 of Make : Bajaj or equivalent model of approved make complete all as specified and directed.

Supply and fix in repairs 'ICON' electronic LED driver suitable for 48 watt LED street light, cat no : BGD 70 650 of Make : Bajaj or equivalent model of approved make complete all as specified and directed.

Supply and fix in repairs 'ICON' electronic LED driver suitable for 50 watt LED street light, cat no : BGD 36 210 of Make : Bajaj or equivalent model of approved make complete all as specified and directed.

Supply and fix in repairs 'ICON' electronic LED driver suitable for 70 watt LED street light, cat no :BGD 36 195 of Make : Bajaj or equivalent model of approved make complete all as specified and directed.

Supply and fix in repairs 'ICON' electronic LED driver suitable for 9 watt LED bollard cat no : BGDZ 40320 of Make : Bajaj or equivalent model of approved make complete all as specified and directed.

Supply and fix in repairs 'ICON' electronic LED driver suitable for 25 watt LED post top, cat no : BRLED 25 of Make : Bajaj or equivalent model of approved make complete all as specified and directed.

M&L Steel Tubular Swaged welded Pole, type 410 SP-31 (9.00 metres long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws, etc. including applying Two Coat of Black Bituminous Paint Internally and Externally up to Planting Depth and applying with Two Coats of Aluminium Painting over a Coat of red oxide primer including Writing MES LT Pole and Blue reflector strip with Synthetic Enamel Paint (First Grade/quality), complete all as directed. Note : Earth work and PCC work will be measured and paid separately.

Taking down old/unserviceable UG cable of any description complete all as directed.

Supply, Laying, Jointing, testing and replace in repairs, XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade laid in trenches/floor or fixed on wall/pole including brass compression cable gland, terminal lug etc after taking down the old unserviceable one complete all as specified for the following:-

(a) 10 Sqmm 4 Core

(b) 16 Sqmm 4 Core

Excavation in trenches nexc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose for laying cables, erection of poles complete all as specified.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified.

Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point.

Laying only old bricks sub class(B) above sand cushioning (width of brick along the length of cable) for cable protection complete all as specified and as directed.

Supply and laying well burnt Sub Class 'B' locally available best quality laid in trenches perpendicular to UG cable above sand cushioning for cable protection complete all as specified.

Supply and spreading dry coarse sand in trenches for protection of underground electric cable, spread in uniform 23 cm thickness and punned down gently to 18 cm complete all as specified and as directed.

Taking down old/ unserviceable GI pipe of any bore complete all as directed

GI tube light grade laid in trenches or fixed on wall, floor or on pole for cable protection complete all as specified for the following sizes : -

(a) 40 mm bore

(b) 25 mm bore

Horizontal Boring by Passing GI Protection Pipe up to 50mm Bore (dia), under Road /Foot Path, not exc. 10.00 METRE in a Single Length, complete all as specified and as directed.

Taking down old/ unserviceable HDPE pipe of any bore complete all as directed.

S & F 32 mm High density polyethylene pipe (HDPE) of pressure rating 6 kgf/cm2 for passing of 10/16 sqmm cable through PCC foundation under sl item no 39 below complete all as specified and directed .

Demolition of cement concrete/hardcore of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L Cement Concrete (1:4:8) type D-2 (40mm Graded Stone Aggregate) as Lean Concrete, Bed Concrete in Foundation of Poles, etc., including Formwork (as required), complete all as directed. (Loc : HT,LT Pole & stay assembly).

M&L Cement Concrete (1:3:6) type C-2 (40mm Graded Stone Aggregate) as in Foundation of Poles, Stays, etc. including Formwork (as required), complete all as directed.

M&L Cement Concrete (1:2:4) type B-1 (20mm Graded Stone Aggregate) as in Coping of Poles, etc. including Formwork (as required), complete all as directed.

S&F Cable Junction Box 155x210x92 mm in size, made out of thermoplastic sheet having IP 65 protection for outdoor installation fixed on poles with flat aluminium clamps of size 20x3 mm, nuts, bolts, washers etc including taking out of old unserviceable cable junction box complete all as specified and as directed. Make : Cat No. KF-1616 B of HENSEL or equivalent model in approved make

Disconnecting/taking down UNSV following Street/Garden/Security Roadway light fittings from pole/structure and repair/checking and identifying of faulty spares, wirings, cleaning of fittings, cover, etc. And reassembling the same after repair, testing and refixing in original position and reconnecting with the electrical line complete all as directed by Engr-in-charge. Note : (i) Materials required for replacement such as choke, ignitor, capacitor, bulb, tube etc will be measured and paid separately under relevant items. (ii) Creapers if any available on pole/structure to be removed without any extra claim. (iii) If E-N value on security feeder is high, it should be checked and rectified without any extra claim.

(a) CFL Street light fitting 4 x 24 watt

(b) CFL Street light 2 x 18 watt.

(c) LED street light 1 x 15 watt (B22 holder with LED lamp fitting)

(d) CFL garden light 1 x 11/2 x 11 watt

(e) LED Post top lantern/bollard 15 watt

Supply and fixing of following materials suitable for various type of light fittings dismantled from item no 54 complete all as specified and directed.

(a) Electronic ballast suitable for 2 x 24 watt CFL fitting, Make : Bajaj (cat no 538457) or equivalent in approved make complete all as specified and as directed.

(b) Electronic ballast suitable for 18 watt CFL fitting, Make : Bajaj(cat no 539316) or equivalent in approved make complete all as specified and as directed.

(c) Electronic ballast suitable for 11 watt CFL fitting, Make : Bajaj(cat no 539315) or equivalent in approved make complete all as specified and as directed.

(d) Lamp, 24 watt, T5 suitable for 4 x 24 watt light fitting, Havells(cat no LHST26124699) or equivalent in approved make complete all as specified and as directed.

(e) CFL lamp, non retrofit 18 watt, D type, suitable for 2 x 18 watt, Make: Bajaj/Philips/Havells(cat no PHCS011), complete all as specified and as directed.

(f) CFL lamp, non retrofit, S type, watt suitable for 1 x 11/2 x 11 watt light fitting, Make : Bajaj/Philips/Havells(Cat No PHCD018), complete all as specified and as directed.

(g) Lamp holder suitable for 4 x 24 watt CFL fitting, Make : Bajaj(cat no 916177) or equivalent in approved make complete all as specified and as directed.

(h) Lamp holder suitable for 2 x 18 watt CFL fitting, Make : Bajaj(cat no 916177) or equivalent in approved make complete all as specified and as directed.

(i) Lamp holder suitable for 1 x 11/2 x 11 watt CFL fitting, Make : Baja(cat no 916178) or equivalent in approved make complete all as specified and as directed.

(j) Porcelain lamp holder suitable for B22 lamp complete all as specified and as directed.

(k) LED lamp of 15 watt, cat no : LHLDEREEMK8X015 of Make : Havells or equivalent model of approved make

Supply and replacement of timer switch with sheet metal enclosure pole mounted type fabricated out of 16 gauge steel sheet consisting of following:-(i) Astro time switch (ii) Power contactor single phase of 40 Amp with 230Volts . CAT PA NO: AUTS02AST00, AUMC2004003OF L& T OR equivalent of approved make

Taking down old unserviceable service wires of any description complete all as specified and directed.

Supplying and fixing in repair service connection,1100 volts grade, heavy duty cable with PVC insulated,multistranded aluminium conductor,served with inner sheathing of PVC tape and overall PVC sheathed, flat or circular of size 2 core x 4 sqmm, complete all as specified and as directed.

Supplying and fixing in repair service connection,1100 volts grade, heavy duty cable with PVC insulated,multistranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed, flat or circular of size 2 core x 6 sqmm, complete all as specified and as directed.

Supplying and fixing in repair service connection,1100 volts grade, heavy duty cable with PVC insulated, multistranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed, flat or circular of size 2 core x10 sqmm, complete all as specified and as directed.

Supply and fix street light bracket, bend to 120 degree angle, made out of 25 mm bore, galvanised iron, light grade tubing (approx 1.2 mtr in length) including necessary two nos suitable size of clamps with nuts, bolts and washers, etc. and two coats of synthetic enameled paint over a coat of red oxide primer including taking down the old unserviceable one complete all as specified and directed.

Supply and fix in repairs street light bracket, bend to shape made out of 25 mm bore, galvanised iron, light grade tubing (approx 1.5 mtr in length) including provision of hoock for hanging of hanging outdoor light and suitable size of round hole for passing of round flexible copper cable of 0.5 sqmm, 3 core (approx 2.5 mtr), necessary two nos suitable size of clamps with nuts, bolts and washers, etc. and two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed.

Supply and fix street light bracket, bend to 120 degree angle, made out of 40 mm bore, galvanised iron, light grade tubing (approx 1.5 mtr in length) including necessary two nos suitable size of clamps with nuts, bolts and washers, etc. and two coats of synthetic enameled paint over a coat of red oxide primer including taking down the old unserviceable one complete all as specified and directed.

Supply & fix in repairs four pole 415 v 63 Amp MCB complete all as specified and directed.

Schedule of Credit

FREEZCON

M/S K S Enterprise