Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹68.9 LAccepted-AOC AT SATHILO PO SAMSARPUR PS ATHAGARH DIST CUTTACK PIN 754029 | ATHAGARH | CUTTACK | ODISHA | 754029 | ₹68.9 L | L1 | Accepted-AOC Winner of the transparent lottery |
| 2 | L1₹68.9 LRejected-Finance | ₹68.9 L | L1 | Rejected-Finance Not wining the transparent lottery |
| 3 | L1₹68.9 LRejected-Finance | ₹68.9 L | L1 | Rejected-Finance Not wining the transparent lottery |
| 4 | L1₹68.9 LRejected-Finance | ₹68.9 L | L1 | Rejected-Finance Not wining the transparent lottery |
| 5 | L1₹68.9 LRejected-Finance | ₹68.9 L | L1 | Rejected-Finance Not wining the transparent lottery |
Tender Value
₹81.0 L
EMD Value
₹81,100
Closing Date
8 Dec 2025, 5:00 pmClosed
SE CBT R and B Division, Choudwar
SE CBT R and B Division, Choudwar
Construction of New Suite in Circuit House premises at Athagarh for the year 2025-26
2025_EICCL_122133_1
SE CBT (R and B)-20//2025-26
National Competitive Bid
Civil Works - Buildings
180 days
Athagarh
Please refer Tender documents.
3 documents required · 3 mandatory
₹10,000
₹81,100
Yes
31 Mar 2026
28 Nov 2025
9 Dec 2025
28 Nov 2025
8 Dec 2025
28 Nov 2025
28 Nov 2025 - 3 Dec 2025
Earth work excavation in foundation trenches in all kinds of soil including hard moorum stony earth mixed with stone and boulders (except sheet rocks and boulders required blasting) including dressing and leveling the bed up to required depth and depositing the excavated materials at places away from work site with all leads and lifts T&P shoring shuttering dewatering if required etc. complete as per direction of the Engineer-in-charge.
Cement concrete (1:3:6) in foundation and floors using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge.
Supplying filling in foundation, plinth & core with sand in layers not exceeding 150mm thick including watering, ramming, cost, conveyance, royalty and taxes of all materials and cost of all labour T&P required for the work etc. complete (measurement will be taken on finished compacted section only).
RCC M-20 using black hard granite crusher broken chips of 10mm to 20mm size (10mm 40% and 20mm 60% ) of approaved quality from approved quarry to achieve the minimum compressive strength of 200kg/cm2 250kg/cm2, 3.00 kg/cm2 of 150mm size cubes on 28 days test confirming to codal provision including hoisting lowering and laying concrete in layers not exceeding 15cm thick compacting in vibrators and watering for 28 days including centering shuttering from works finishing the exposed surface smooth providing grooves where necessary including cost conveyance royalty taxes of all materials with all leads and lifts and cost of all labour T&P mechineries required for the work de-watering if necessary compalete in all respect as directed by Engineer-in-charge including dismantling the centering and shuttering but excluding cost conveaynce of MS rod or tor steel & bind wire and labour charges for strengthening cutting beinding binding wilding and tying the grills etc hoisting and placing in positing (to be paid separetely for RCC work)Column Base Footing
Column Super Structure
1st floor
Head room
Plinth Band
Column Super Structure
1st floor
Lintel Band
Column Super Structure
1st floor
Floor Beam
Column Super Structure
1st floor
Chaja
Column Super Structure
Stair case
Column Super Structure
1st floor
Roof slab
Column Super Structure
1st floor
Fly ash Brick masonry using Fly ash Bricks in FOUNDATION AND PLINTH having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use including splays, cutting, circular moulding, corbelling, champhering and similar such type of works, scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge.
Straightening the coiled or bent up M.S. rod / HYSD bars confirming to Gr. S 240 or S 415, cutting bending binding lapping placing welding etc. (Confirming to ISI specification) and jointing if necessary by lapping and tying the grills and placing in position as required for RCC work as per approved design hoisting lowering and laying in position including cost conveyance & taxes of M.S. rod / tor steel and binding wire of 18 to 20 gauge (as approved by the deptt.) weight of over lapping, coping, welded joints, spear bar, chair, stage, hanger and binding wires shall not be considered for payment at all. Standard co-efficient of different size of the steel shall be considered. Welding & lapping should be confirming to relevant clause of IRC 1987.
Column Super Structure
1st floor
Providing 12mm thick cement plaster in cement mortar (1:6) finished smooth to out side rough surface of brick walls after racking out joints, scrapping & cleaning the surface, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.
Column Super Structure
1st floor
Providing 16mm thick cement plaster in cement mortar (1:6) finished smooth to inside rough surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.
Column Super Structure
1st floor
Providing 6mm thick cement plaster in cement mortar (1:4) finished smooth in ceiling & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.
Column Super Structure
1st floor
Supplying fitting and fixing vitrified tile (SOMANY, KAJARIA, JOHNSON) in floors of size 600mmx600mm in floor of approved quality over 25mm thick cement mortar(1:1)of approved make conforming to IS 13755 with application of polymer modified quick set cement based water resistant adhesive conforming to IS 15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials labour T&P etc required for the work all complete as per direction of Engineer-in-charge
Column Super Structure
Fly ash Brick masonry using Fly ash Bricks in SUPERSTRUCTURE having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use including splays, cutting, circular moulding, corbelling, champhering and similar such type of works, scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge.
Column Super Structure
Supplying fitting and fixing vitrified tile (SOMANY, KAJARIA, JOHNSON) in dadoo of size 600mmx600mm in floor of approved quality over 25mm thick cement mortar(1:3)of approved make conforming to IS 13755 with application of polymer modified quick set cement based water resistant adhesive conforming to IS 15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials labour T&P etc required for the work all complete as per direction of Engineer-in-charge
Supplying fitting and fixing Chequred tiles (SOMANY, KAJARIA, JOHNSON) in floors of size 600mmx600mm in floor of approved quality over 25mm thick cement mortar(1:1)of approved make conforming to IS 13755 with application of polymer modified quick set cement based water resistant adhesive conforming to IS 15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials labour T&P etc required for the work all complete as per direction of Engineer-in-charge
Supplying fitting and fixing Granite tiles (SOMANY, KAJARIA, JOHNSON) in floors of size 600mmx600mm in floor of approved quality over 25mm thick cement mortar(1:1)of approved make conforming to IS 13755 with application of polymer modified quick set cement based water resistant adhesive conforming to IS 15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials labour T&P etc required for the work all complete as per direction of Engineer-in-charge
Column Super Structure
1st floor
Finishing the wall surface with Acrylic Wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost, conveyances, taxes of all materials, cost of labour, T&P required for the work etc. complete for all floors as per specification & direction of the Engineer-in-charge.
Column Super Structure
1st floor
Finishing wall surface two coats of plastic emulsion paint over a coat of water bound primer to given an even shape of the surface including cleaning the surface with sand papering and using primer & paint of approved shade incluidng cost, conveyance, taxes, royalities, cost of all labour, T&P etc. complete as per direction and specification of Engineer-in-charge.
Column Super Structure
1st floor
Finishing wall surface two coats of weather coat over a coat of water bound cement primer with cost, conveyance, taxes, royalities, cost of all labour, T&P etc. complete as per direction and specification of Engineer-in-charge.
Column Super Structure
1st floor
Provding and applying priming coat with cement base primer of approved brand and manufacture on plaster/putty surface as per the instruction of Engineer-in-charge at all elevation and all height including cost of all materials labour T&P etc complete
Column Super Structure
1st floor
Providing and fixing 32mm flush door shutters made out of 32mm thick BWR Block Board including the cost of hardware fittings like 125mm MS butt hinges, 250mm MS aldrop, 150mm MS handle, 150mm MS tower bolt, door stopper cost of labour, conveyance, taxes, loading, unloading, T&P etc. all complete as per the direction of Engineer in charge. as per spectification and direction of the engineer-in-charge.
Column Super Structure
Supplying fixing and fittings MS door and window shutters with frames, window grills, MS verandha grills and MS grill gate of approved design and drawing made out of MS flat and MS angle at work site with one coat of anticorrosive red oxide zink chrome primer including cutting holes in brick or RCC walls and fixing with CC (1:3:6) including cost conveyance royalty and taxes of all materials all labour T&P required for the work complete (payment will be made on weight basis only).
Column Super Structure
Painting two coats with approved synthetic enamel paints to M.S. window and verendah grill over wahs in sand paper or iron paper received to paints smoothly including cost, conveyance, taxes, cost of all labour as per direction and specification of Engineer in charge
Column Super Structure
1st floor
Point
1st floor
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride(UPVC) (FENESTAI Three Track - Three Panel sliding window- 60- Series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and Window Sash of 39 mm x 58 mm x 25 mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners. silicon rubber sealant. easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards .
E.I. work:-Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 2 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required. Make: Conduit:precision/AKG/BEC/Anchor Wire:KEI/Finolex/ Polycab Switch & socket: Legrand(Myirus)/schneider-Zenclo/Siemens (Marq) Group-A:
Group-B:
Group-C:
Supplying and fixing 6 Amp plug with 6 Amp switch (Modular Type) on existing board. Make:Legrand(Myirus)/schneider-Zenclo/Sieme
ns (Marq)
Supplying and fixing including testing and commissioning of 6A modular socket outlet with 6 Amp switch including providing GI modular box with faceplate etc as required. Make:Legrand(Myirus)/schneider-Zenclo/Siemens (Marq) 1 nos 6 Amp 3-pin socket with 6 Amp switch.
2 nos 6 Amp 3-pin socket with 2 nos 6 Amp switch.
Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards consisting of a 16 Amp clip-in type modular switch with indicator and a 6/16 Amp clip-in type modular socket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge. Make:Legrand(Myirus)/schneider-Zenclo/Siemens (Marq)
Supplying, installation, testing & commissioning of 25 amp modular socket outlet on surface or in recess, on 1 Nos two module GI box with 25A Starte motor . complete as direction of Engineer-in-charge.Switch & socket: Legrand(Myirus)/schneider-Zenclo/Simens(Marq)
Wiring for circuit/ submain wiring along with earth wire of following size of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required. Make-Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI 2 x 1.5 sq.mm + 1 x 1.5 sq.mm(wiring)
2 x 2.5 sq.mm + 1 x 1.5 sq.mm (for Light plug circuit wiring)
2 x 4 sq.mm + 1 x 1.5 sq.mm (For AC & power circuit)
For Inverter wiring 1 X 1.5sqmm
2 x 6 sq.mm + 1 x 4 sq.mm(For SPN DB )
4 x 10sq.mm + 2 x 4 sq.mm (For TPN DB)
S/F of energy efficient LED tube/ Batten light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Bajaj /Philips/Wipro /Crompton/Havells) . The luminaire should be Replacement Warranty will be 2 years .
S/F of surface Mounted Led bulk head Lighter comprising of 10W LED BULK HEAD LIGHTwith non integral / integral driver, 6500K color temp having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy > 120 lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job. (Make: Bajaj /Philips/Wipro /Crompton/Havells)
Supplying, Erection, Fixing, connection & testing of LED Light of elegant look (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) 60 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more , LED street light
S/F of Wall mounted 9W LED Bulb with Anchor holder & all other required accessories similar to Philips (CAT No:B22) / Equivalent of Panasonic/LT/Havells/Wipro /Crompton/Bajaj. The luminaire should be Replacement Warranty will be 2 years
S/F. of 34Wt. LED Surface/Recess mounting down lights of( Havels-PLUTO PANEL/crompton or eq. model ) .(Portico light)
S/F of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (Make : Crompton/ Orient/ Havells/Polycab). 1200 mm sweep
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover.Make-Schneider (Zencelo)/ legrand( ( Myrius)) /Panasonic (vision)as required as per direction of Engg.-in-Charge.
Supplying and fixing 5step type electronic fan regulator wISI marked including connections etc. as required. Make:Legrand(Myirus)/schneider-Zenclo/Siemens (Marq)
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge.
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ ABB ITUS/LK -Exora as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years. 4 Way(4+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door
Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required.
6 Way(6+18) Way TPN MCB DD DB Horizontal Type suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door
Supply and fixing of 8 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required
Supplying and fixing 63Amps 4P 415 volts MCB 415 volts, C series,10KA breaking capacity, Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB with connections as per direction of Engg.-in-Charge.
Supplying and fixing 6-32 Amps rating, 240V, C series,10KA breaking capacity, Double pole MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .
Providing and fixing extra down rod of 20 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required . ( more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored.
Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket . (Make: superimax/Cese fire/Minimax)
Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6 kg capacity including cost of all material & labour etc complete. (Make: superimax/Cese fire/Minimax)
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING EMERGENCY LIGHT)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & co
mpelete test certificate must be submitted along with panel board including component list. Type 2 SPD shall be installed in the incomer. Separate Aluminium Earth bus bar should be installed. In commer- 01 numbers of 63 Amps 4P MCB. Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 (Icu=100% Isc) with shunt trip & axulary for BMS & mechnical inter locking for one incommer source to other. Busbar- 04 numbers of 100Amps Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. Out going- 04 nos 32A 2P MCB UPS Light load for each floor. Out going- 03 nos 32A 4P MCB OT/ICU POWER/OT MACHINE OR Bed head panel ,(ii) 01 set of 0-100Amps Ammeter Digital type & CTS.(DIGITAL) (iii) 01 set of 0-500 voltmeter Digital type.(DIGITAL)
SITC of HT Rubber mat 1m X 2m
Earthing with GI earth pipe 3m long 40mm dia ISI marked including all accessories and providing masonary enclouser with cover plate having locking arrangement and watering pipe etc. with charcoal & salt as required as per the direction of Engineer-in-charge.
S/F of Copper Plate Earthing (600x600x3.15mm) 40mm dia GI PIPE heavy duty with including copper flat, excavation of earth and providing masonary work with cover plate having loccking arangement and and , charcoal, salt , funnel , tinned brass bolt, check nut and washer complete in all respect as per Direction of Engineering -in-Charge.
Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing along with cables etc as required.
Providing and fixing 8 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
Supplying & Testing of 1.1 KV grade Aluminium XLPE armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. (Make-Polycab/Gloster/Nicco) 3.5C X 35 sqmm Al
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
Supply & Making end Termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable) 3.5C X 35 sqmm Al
25mm UPVC ASTM Pipe in Ground floor
Providing,fixing and laying of fallowing dia PN16 HDPE pipe 63mm(medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
P.H. work:-Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor c-pvc pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.In Ground floor (Supreme/Ashirvad/Oriplast) 20mm dia CPVC pipe
25mm dia CPVC pipe
25mm UPVC ASTM Pipe in 1st floor
Providing,fixing and laying of fallowing dia PN16 HDPE pipe 63mm(medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
32 mm dia UPVC ASTM pipe
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mm thick wall In Ground Floor
20mm dia CPVC pipe
25mm dia CPVC pipe
First floor
40mm diaUPVC ASTM pipe
In first floor
15mm dia long body Sink cock (Jaquar)-CON-CHR-357KN
15 mm dia CP L.B. Bib cock (CON-CHR-037KN)
15mm dia CP angle stop cock (FLR-ACR-5053N)
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15mm dia CP Bib cock (FLR-CHR-5047N Jaquar make)
15mm dia CP 2 Way bib cock (FLR-CHR-5041N)
15mm dia CP piller cock (CON-CHR-021KN)
15mm dia CP flange
15mm Cp extention piece
Double coat hook (AKP-CHR- 35761P Jaquar make)
15mm dia C.P. wall mixture 3-in-one System (Jaquar make with provision for over head ShowerFLR-ANQ-5281N
Single Lever Basin Mixer without PopupWaste with 450mm Long Braided Hoses(As Per Cat. No: Cat. No: KUP-CHR-35011BPM of Jaquar)
32mm dia CP on Brass Bottle Trap (As per Cat. No. ALD-CHR-769L250x190 of Jaquar)
125mmdia C.P.grating
15mm dia CP Health faucet -jaquar make-HSH-CHR-85537))
25mm brass full way valve
32mm brass full way valve
40mm brass full way valve
Shower Arm (SHA-CHR-477)
Over head shower 150 x 150 square (jaquar OHS-CHR-1605 Make)
600mm X 125mm C.P glass shelf (CAN-CHR-1171N)
CP soap holder (CAN-CHR-1131N)
25mm CP towel rail (CAN-CHR-1111N)
Towel Rack 600mm long with Lower Hangers, Stainless Steel AKP CHR-35781PS of jaquar
C.P towel ring (CAN-CHR-1121NMI)
110mm dia U-PVC Door Tee
110mm dia U-PVC Plain Tee
110mm dia U-PVC Door Bend
110mm dia U-PVC Offset without ear
110mm dia U-PVC 'P' trap
110mm dia U-PVC Plain Band
110mm dia U-PVC Cowl
110mm dia U-PVC clamp
Supplying all materials, labour, T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701--1996 including cutting holes through the tank and fixing mild steel ltubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 meters above ground level and placing the tank to the required position and providing 1st class Fly ash.Brick work in cement mortar (1:6) of 0.46mt. height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C.slab of size 1.60mt.x1.60mt. and 0.10mt. thick, R.C.C.beam of 0.25mt.x0.30mt. and 2.60mt. average length in cement concrete (1:2:4) using 12mm size h.g.chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. 2000 litre capacity water storage tanks(3 Layer) in 2nd floor-sintex make
Supplying all materials,labour,T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No.13592/1992 to walls with nails,bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification,testing,earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of Engineer-in-charge. (Supreme/Ashirvad/Oriplast) 110mm dia U-PVC SWR Pipe
75 mm dia U-PVC SWR Pipe
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall
Supplying all materials, labour, T&P and cutting holes in R.C.C roofs,comice etc for passing HCI Pipes/U.P.V.C Pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concre(1;2;4) includeing finishing complete so as to make it leak proof as per direction of the Engineer in charge.
75mm dia U-PVC Door Bend.
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge 600x450x250 mm stainless steel kitchen sink-glossy-IS:13983 - 1994 (Jayna make)
75mm dia U-PVC Plain Bend.
110x75mm dia Reducer
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge Design Mirror
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge. In ground floor
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge One piece commod(Hindware)ELEMENT Cat No.92084.
Supplying all materials, labour, T&P and providing cement concrete (1:2;4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. Ground Floor
First floor
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 12mm thick CP (1:4) on bw,-In Ground floor
First floor
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps(Plaza make) capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks an
d back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge 550mmx400mm size wash hand basin with Pedestall ( (Jaguar LYRIC Make -LYS-WHT-38801 & 38301 )
Half Padestal wash hand basin(Make:JAQUAR/HINDWARE/CERA/PARRYWARE) Half pedestal basin FNS-WHT-40801 Wall Hung Basin with Fixing Accessories Size: 620x480x185 mm & FNS-WHT-40305Half pedestal with Fixing Accessoriesfor 40801
d back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge 550mmx400mm size wash hand basin with Pedestall ( (Jaguar LYRIC Make -LYS-WHT-38801 & 38301 )
Supplying all materials, labour, T&P and fixing granite tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. In first floor
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. in ground floor
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. Kajaria / Somany / Johnson to be pre-approved 600 x 600mm of size ground floor
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:1.5:3) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, fly ash bricks in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI/P-trap gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge Inside size 250mmx250mm
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inside size 760mmx760mmx460mm
Cost of R.C.P.C.Cover.
Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.22m dia x 2.10m deep soakway pit
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia u-pvc pipe alround concrete
160mm dia u-pvc pipe alround concrete
In First floor
- do - with addl. Depth of 1.5 m
Excavation of foundation in laterite rock or any hard rock (other than granite or disintegrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.50 mtr. in depth and depositing the soil within initial lead of 50 mtr. and as per specification approved by the Department.
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. Kajaria / Somany 600 x 300 cm size in Ground floor
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. In ground floor
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
For RCC wall
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
Supplying all mat
erials, labour, T&P and fitting and fixing S.W.Tee of size 160mx160mx160m as per P.H.D.specification and direction of the E.I.C.
Supplying all materials, labour, T&P and constructing vent base as per P.H.D specification etc all complete.
Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm diameter U-PVC SWR pipe
110mm dia U-PVC Cowl
110mm dia U-PVC Plain shoe bend
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.46 MB
BOQ_567595.xls
BOQ • 3.74 MB
DTCN.pdf
Tender Documents • 1.07 MB
Download all tender documents and submit your bid