REPAIR MAINT REPLACEMENT OF INTERNAL WIRING SUBMAIN WIRING CONTROL DBs MCBs US FITTING FIXTURES GEYSER EXHAUST FAN CEILING FAN AND REPAIR MAINT OF SECURITY STREET LIGHT FLOOD LIGHT POST TOP LANTERN GATE LIGHT AUTOMATIC TIMER SWITCH POLE PAINTING AN

Amount

M/L for Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed FRLS multistranded copper conductor cable 1100 volt grade enclosed in and including PVC casing and capping with accessories fixed on surface on walls/ceiling by means of PVC sleeves, Dash fastners and cadmium plated screws including sunken junction box not less than 3.0 mm thick concealed in wall, mounting accessories like switches, sockets fan regulators with 3.0 mm thick Laminated sheet top covers etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly. for One light/fan/bell point controlled by one switch 6 Amp one way, complete all as per specified and directed.

All as per item no 1 here - in - before but for One 3 pin socket outlet on same board with other switches.

All as per item no 1 here - in - before but for One 3 pin switch socket combination 6 amp on the independent board.

All as described as per item No 1.00 above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board, complete all as per specified and directed.

S & F in replacement under repair switch piano flush type single pole, one way 6amp, complete all as per specified and directed. Make: Anchor/SSK/Cona

S & F in replacement under repair switch socket combination 5 pin 6 amp, complete all as per specified and directed. Make: Anchor/SSK/Cona

S & F in replacement under repair Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type, complete all as per specified and directed.

S & F in replacement under repair ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 230 volts ISI marked, complete all as per specified and directed.

S & F in replacement under repair lamp holder,PVC/Polycarbonate type and back plate suitable for batten fitting, complete all as per specified and directed.

S & F in replacement under repair flush type bell push 6 amp duly marked for bell, complete all as per specified and directed. Make : Anchor/SSK/CONA

S & F in replacement under repair Electronic ding dong bell AC 230V single pole, complete all as per specified and directed. Make : Anchor/ Bajaj

S & F in replacement under repair fan regulator electronic type 100Watt 20V-50Hz, complete all as per specified and directed. Make: Ancho cat No 38660 or equivalent

S & F in replacement under repair ceiling fan capacitor 2.5 mfd, complete all as per specified and directed.

S & F Energy efficient LED tube light fitting 4", 1x18/20 watt, with bipin holders, connector block, CCT - 6500K, system output lumen not less than 1800lm, aluminium housing, surge protection range 3KV including connecting up with PVC insulated 3 core sheathed 0.5 sqmm copper conductor two numbers PVC mounting blocks for fixing of fitting, complete all as per specified and directed. Make : Batten : Cat part No- DMLN1LT8-16 and Tube Rod of Make Crompton Cat Part No : LTT8-20 or equivalent in Havells /Philips

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old u/s light fitting, complete all as per specified and directed. Make : Crompton Cat part No "LDL-10-CDL" or equivalent in Philips/Havells.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old u/s light fitting, complete all as per specified and directed. Make : Crompton Cat part No "LBH-10-CDL" or equivalent in Philips/Havells.

Supply and fixing LED Building Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including taking down old u/s light fitting, complete all as per specified and directed. Make : Crompton cat Part No "LST-25-CDL-M" or equivalent in Philips/Havells.

S & F in replacement under repair 9W LED Bulb suitable for B22 holder . System Efficacy should be > 85 lm/ W. PF > 0.9, The Lamp Should have Cool Daylight Color temp of 6500K, lumen output >800 lm, complete all as per specified and directed. Make: Philips/Wipro/Crompton

Taking down existing UNSV copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as per specified and directed.

Dismantling and taking out submain wiring 2/3/4/6 wire of any size, segregating for material for reuse, making good disturbed surface of walls/floors to match with existing surface and taking out from site, complete all as per specified and directed.

Dismantling damaged wooden boards of Electric meter by disconnecting all electric connection and S&F rectangular teak wood board of size 30cm x 25cm x 5cm deep with smooth hylem sheet top 5mm thick for mounting Electric Meter.MCB DB including making holes for incomming and outgoing wires and making necessary electrical connections incl painting of boards, complete all as per specified and directed.

S & F in repair MCB DB factory made SPN 12 way IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs /Isolators /RCCBs etc, complete all as per specified and directed. Make : Legrand/Schneider/L&T

All as per itme no 22 here - in - before for SPN 8 way complete all as per specified and directed.

All as per itme no 22 here - in - before for SPN 4 way complete all as per specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete including taking down old unserviceable MCB, complete all as per specified and directed. Make : Legrand/Seimen/Schneider

All as per item No 25 here – in – before but SPN 40 to 63 Amps 'C' curve, complete all as per specified and directed. Make : Legrand/Seimen/Schneider

M&L for Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor, complete all as per specified and directed. NOTE : Two runs of single core 6.0 sqmm and one run of 6.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

M&L for Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor, complete all as per specified and directed. NOTE : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

Supply and fixed on surface Rigid non metallic PVC casing caping of size 25mm including of all tee, bends, elbows and fixing accessories such as couplers, lock nuts,saddles, pipe hooks including taking down old broken PVC casing caping and making good surface, complete all as per specified and directed.

All as per Item No 29 above here in before but for 20mm complete all as per specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 600mmX600mmX6mm buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and connected to and including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES schedule Part-I, and testing on completion including necessary excavation and earth work in any type of soil, PCC(1:3:6) type C1 chamber, CI Cover with cast iron frame, funnel with watering pipe 20mm dia medium grade, wire mesh and lugs, GI protection pipe15mm dia, light grade 7.5 mtr long for protection of earth lead upto test point etc incl taking down old u/s earthing, complete all as per specified and directed.

Refixing of old serviceable light fitting of any description including clamps etc as required, complete all as per specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete all as per specified and directed. Make : Crompton Greaves, Model : BRISK AIR , or equivalent in USHA/Bajaj. Note: Old UNSV ceiling fans will be deposited to MES Store at Rhenock.

S&F Sheet Metal Enclosure with socket plug top and MCBs double pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 240V, 20 Amps incl taking down old u/s metal socket, complete all as per specified and directed. Make : ABB/L&T/C&S

S&F Decorative, wall mounting fixture in durable plastic body & designer mesh in gold finish suitable for 9 W retrofit CFL including necessary connection with 0.5 sqmm PVC sheathed 3 core copper cable and 14W LED lamp incl taking down old u/s light fitting, complete all as per specified and directed. Model "Glaze" of make : Havells or equivalent in Philips/Bajaj

Taking down existing unserviceable service cable of any size and S&F 1100 volts grade heavy duty PVC insulated stranded aluminium conductor cable of cross-sectional area 10 Sqmm size (one twin core cable flat or circular, served with inner sheathing of PVC tape and overall PVC sheathed) in service connections, suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire and testing on completion, complete all as per specified and directed. MAKE : FINOLEX/PLAZA/ HAVELLS/ POLYCAB/KEI.

Taking down carefully electric storage type water heater (Geysers) of any make and any capacity from its mounting place opening for inspection compete Including back plate heating element inner copper tank etc. De-scaling back plate and heating element by cleaning with Sulfuric acid/ de-scaling compound and re-assembling of Geysers after repairs carrying out and re-fixing in same position (Replaced items such as spares measured and paid separately)in relevent item including making good to walls with CM (1:3) or PCC (1:2:4) and plastering the wall surfaces with CM 1:6 and replacement of old nuts, bolts and rubber gasket etc, complete all as per specified and directed. Note :- Any type of rubber gasket , rubber washer, screws , insulator tape required in work deem to be included in the rate.

All as per item No 37.00 herein before but for descaling / cleaning the inner tank including denting and brazing the leakage joints / points till the leakage stop including carrying out minor repair of outer body surface, bottom and top cover, complete all as per specified and directed. Note :- Any damage if occured during the process of cleaning the geysers will be made good by contractor at no extra cost.

M&L for 1.5 KW capacity Heating Element, triangular type including making electrical connection incl taking down old u/s heating element, complete all as per specified and directed.

All as per item No 39.00 here in before but of capacity 2.0 KW complete all as per specified and directed.

Supply & fixing PVC connection heavy duty with brass/PTMT nuts of reqd length not exceeding 300 mm with rubber & PVC washer suitable for 15 mm bore GI pipe complete for cold water.incl taking down old u/s connection, complete all as per specified and directed.

Supply & fixing hot water outlet connection made of brass chromium plated with Union rubber washer suitable for 15 mm bore GI pipefor hot water incl taking down old u/s item complete, complete all as per specified and directed.

Supply & fix in replacement of thermostat (automatic cut of) of existing type & make, 15 Amps, 230/250 volts AC ISI marked, complete all as per specified and directed.

Supply & fix in replacement of indicator lamp assembly LED type RED/GREEN for geyser, complete all as per specified and directed.

S&F in replacement plug top 15 Amps240 Volts, complete all as per specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete, complete all as per specified and directed. Make Crompton cat part No "LCTLRNE-36-FO-CDL" or equivalent make in Philips/Havells.

Supply & fixing LED PL Lamp to the existing light frame or as per site including necessary connection and dismantling of existing defective fitting complete. Make Philips, cat part No. LED PL-L 18W, 6500K 2G11 or equivalent make in Crompton/Havells.

S&F LED Driver for existing ceiling lights up to 36 W, complete all as per specified and directed.Make : Crompton/Havells/Philips

M&L in repairs PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep, complete all as per specified and directed.

All as per item No 49 here-in-before but of size 175 x 100 x 50 mm complete all as per specified and directed.

All as per item No 49 here-in-before but of size 250 x 200 x 50 mm complete all as per specified and directed.

M&L for Sheet Metal enclosures double door TPN DB 4 Way, complete all as per specified and directed.Make - Havells /Legrand /Seimen

Taking down of exhaust fan upto 450/300mm sweep, opening, replacement of unserviceable accessories, servicing, oiling, greasing, complete overhauling of fan and re-assembling and testing complete for efficient functioning after fixing / hanging in position from ceiling rose to fan, complete all as per specified and directed. (Note : gun metal bush, bearing will be measured and paid under relavant item here-in-after).

Supply only gun metal bush of sizes suitable for exhaust fan upto 450 mm sweep, complete all as per specified and directed.

Supply only ball bearing No 6203 suitable for fan of existing make type & sweep, complete all as per specified and directed. Make:- NBC/SKF/TATA

Checking of exhaust fan (of any sweep) by replacing unserviceable capacitor/ tightening the loose connections if any including testing, complete all as per specified and directed. (Note: Capacitor of required capacity will be measured & paid under relavent item here-in-after)

M & L for painting of exhaust fan carefully with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust etc, complete all as per specified and directed.

M&L for shifting of exhaust fan from one place to another including making hole at new place and filling of hole at old place including all necessary electric connection, brick work, plastering and 2 coat of painting of size 150, 200, 250 and 300mm dia, complete all as per specified and directed.

Taking down unserviceable fitting of any type or any wattage i.e. 100/90/80/72/60/45/30/25 Watt energy efficient street light fitting, identifying the fault, repair / replacement of old unserviceable accessories with new accessories, reassembling and make the street light fitting functional and refixing in existing location including three core copper PVC insulated conductor of 1 sqmm size (nominal area) of suitable length to connect the lumaniries to overhead conductor / existing lines, complete all as per specified and directed. Note : Spares part/material required for repair to street light fitting shall be measued and paid separtely under relevent items as supply only.

Supply only 1100 volts grade heavy duty cable PVC insulated and FR PVC rounded sheathed, copper conductor (flexible) industrial cable, conforming IS: 694 of size 1.5 sqmm 3 core laid along pole from junction box to light fitting, complete all as per specified and directed.

Supply only in replacement of street light driver of 25 watt to 50 watt, 230V,50Hz suitable for operation over voltage range of 140V to 270V by removing from existing position, complete all as per specified and directed.

Supply only in replacement of street light driver of 55 watt to 100 watt, 230V,50Hz suitable for operation over voltage range of 140V to 270V by removing from existing position, complete all as per specified and directed.

M & L in for DK Thermoplastic cable junction boxes IP 65 with of size 300x200x105 of metric knockouts for cable entry, weather proof for outdoor installation and including glands and with 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 sqmm 2/4 core and fixed to the PSC/Steel Poles by means of suitable size of clamps with nut and bolts and incl provn for fixing 01 No. of single pole MCBs 6-32 amps,10KA and MCB TP 6-32 amps, 10 KA, ‘C’ series 01 No inside the box incl taking down old u/s junction box, complete all as per specified and directed. Make : Sintex/Hensal or equivalent approved by GE.

S&F Busbar Chambers 4 way 100 Amps outdoor type (IP 65/66) pole mounted including provision of fixing on pole by means of suitable size of clamps with nut and bolts including necessary connection including taking down of old u/s bus bar, complete all as per specified and directed. Make Havells cat part No IHBC010004 or equivalent make of SMC/Hensel

S&F in repairs LED street light fittings, IP-66, 70 watt including bracket made out of 40 mm dia light grade GI pipe not less than 1.2 mtr long bend to shape duly fixed with MS clamps of 3mm thick, nut, bolts etc complete fixed to steel tabular poles including electrical connection complete with 3 core 1.5 Sqmm PVC sheathed stranded copper wire ISI marked from junction box to fitting, complete all as per specified and directed. Make Crompton, cat part No "TRP-421-70-57-SL-LM-NBK" or equivalent model of Havells/Bajaj/Philips

Supply and Laying in replacement u/s cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables of Size of 16 Sqmm 4 core (heavy duty) 1100 Volts grade with stranded aluminium conductor on wall/in Trench with the help of shadel of following size as required at site, complete all as per specified and directed. Make : MESCAB/HAVELLS/POLYCAB/GLOSTER/KEI

Excavation in trenches/ foundation in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.50m deep for foundation and getting out including forming bottom surface to required level or slope, complete all as per specified and directed.

Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as per specified and directed.

Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and directed.

M&L for sand cushioning to U/G cable in layers in trenches, complete all as per specified and directed. Note :- Only Puned layers shall be measured for payment

M&L for well burnt bricks, sub class 'B' bricks of size 250mmx125mmx75mm, best quality locally available laid flat dry in trenches for cable protection, complete all as per specified and directed.

M&L for painting of steel tubular pole of any size , vertical complete with cross arms with one coat of aluminium paint after cleaning and preparation of surfaces of poles, cross arms, painting 30 cm wide Yellow and black strip on poles up to 1.5 mtr high above coping level and numbering of size 70mmx40mm by using stencil to the pole with black synthetic enemal paint (1st grade ), complete all as per specified and directed.

S&F in repair GI Pipes 25mm bore light grade in any position for protection of cable fixed at pole/laid under road , nallah, crossing walls under floors etc, complete all as per specified and directed. Make : TATA/BANSAL/JINDAL or equivalent

S&F in repairs automatic street/security light switch of rating 8 KW in three phase using nature switch for automatic switching of street lights based on lux level on nature light. The sensor (Nature Switch) along with suitable power contactor, MCB and supprot terminals should be enclosed in pole/wall mountable enclosure made of rust proof, electric shock proof, termite proof and FR grade special moulding compound (Polycarbonate) conforming to IP 54, complete all as per specified and directed, along with each contactor 25-32 Amps , Incoming-Outgoing MCBs (03 Nos each) rating : 32 Amps, circuit wiring min 10 sqmm. Model - SWADEEP - 02EC8KW3P. MAKE- 1.Nature-Nature Switch : Kakatiya Energy systems Pvt. Ltd / HEALER / BAJAJ / Havells 2.Contactor : BCH / L& T / Schneider 3.MCB : Hager / Schneider /L&T/C&S 4. Circuit wiring : Finolex / Polycab or equivalent.

Dismantling/taking up or down roof conductor/down conductor of aluminium strip any size/condition with insulators from the Bldg for replacement of insulator/conductor etc and segregating serviceable conductor for re-use at site and removal of unserviceable conductor and insulators from site of work, complete all as per specified and directed.

Fixing only serviceable roof conductor/down conductor any type/size retrieved under item No 6.00 above on roof wall on porcelain or epoxy spacer insulator (insulator measured and paid separately under relevant item), complete all as per specified and directed. Note :- Rates quoted by the contractor are deemed to be included for cutting ,jointing pieces ofstrip with nut bolts etc.

S&F aluminum strip 25 x 3.15 mm complete with saddles and fixing screws for roof / down conductor on porcelain/epoxy spacer insulatoror fixed on GI Pipe (Spacer insulator measured and paid separately under relevant items), complete all as per specified and directed. Note :- Rates quoted by the contractor are deemed to be included for cutting ,jointing pieces ofstrip with nut bold etc.

S&F porcelain/epoxy white / brown / green spacer insulator with one GI stud bolt with nut and washer with necessary drilling for bolt hole for holding / fixing roof conductor / down conductor of lightning conductor, complete all as per specified and directed.

Fixing only porcelain/epoxy white / brown / green spacer insulator retrieved under item Ser No. 1.00 above with one GI stud bolt with nut and washer for holding / fixing roof conductor / down conductor of lightning conductor, complete all as per specified and directed.

S&F single pointed air termination aluminium rod 12-mm dia 300 mm long with fixing arrangement including dismantling of old unserviceable/ deshaped conductor and removed from site of work, complete all as per specified and directed.

Fixing only in repair single pointed air termination aluminium rod 12-mm dia 300 mm long with fixing arrangement including dismantling of old unserviceable/ deshaped conductor and removed from site of work, complete all as per specified and directed.

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw, complete all as per specified and directed.

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp, complete all as per specified and directed. Make : LPTO-40-CDL/M or equivalent in Havells/Philips or equivalent

Supply and fixing LED Bollard with robust design and efficient light distribution 10W 230 watt volts AC outdoor type with decorative with IP 65 protection with impact and corrosion resistant complete, complete all as per specified and directed. Make : LBLSR-10-CDL or quivalent in Havells/Philips or equivalent

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

M/S JAYSHREE CONCERN (BID ID -3117766)

GYANENDRA THAPA (BID ID -3117773)

PRASAD PRADHAN AND SON (BID ID -3116730)

MS MAYA PRAKASH GOEL AND SONS (BID ID -3117715)

RAMESH GURUNG (BID ID -3117680)

G K SUTHAR (BID ID -3117789)

MS BRAHMA CONSTRUCTION (BID ID -3117836)