Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹8.9 LAccepted-AOC | ₹8.9 L | L-1 | Accepted-AOC L-1 |
| 2 | L-2₹12.4 L+₹3.5 L (39.9%)Rejected-Finance KENDWA KENDWA LALMATIA LALMATIA GODDA JHARKHAND 814165 | GODDA | JHARKHAND | 814165 | ₹12.4 L+₹3.5 L (39.9%) | L-2 | Rejected-Finance L-2 |
| 3 | L-3₹12.9 L+₹4.0 L (45.5%)Rejected-Finance AT KENDUA PO LALMATIA DIST GODDA JHARKHAND 814165 | LALMATIA | GODDA | JHARKHAND | 814165 | ₹12.9 L+₹4.0 L (45.5%) | L-3 | Rejected-Finance L-3 |
| Sl No | Description | Qty | Unit | M/S Abdul Haque L2 | Rahul Kumar Gupta L1 | M/s Ah Construction L3 |
|---|---|---|---|---|---|---|
| 1.00Item Description/ Heading | ||||||
| 2.00 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of: 200mm dia. | 3 | Each | 250.24 ₹750.72 | 176.14 ₹528.42 Lowest | 275.26 ₹825.78 |
| 3.00 | Providing and fixing M.S clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part-I), including necessary bolts & nuts of required size complete. 200mm clamp. | 3 | Each | 1,675.24 ₹5,025.72 | 1,206.25 ₹3,618.75 Lowest | 1,685.45 ₹5,056.35 |
| 4.00 | Supplying of Nylon rope 25mm dia. | 375 | Metre | 60.24 ₹22,590 | 41.95 ₹15,731.25 Lowest | 66.57 ₹24,963.75 |
| 5.00 | Supplying G.I pipes 50 mm dia nominal dia including fittings. | 360 | Metre | 456.28 ₹1,64,260.8 | 327.04 ₹1,17,734.4 Lowest | 476.25 ₹1,71,450 |
| 6.00 | Lowering and commissioning of 7.5 HP Submersible pump in deep borewell with GI/ CPVC/PVC pipe including all accessories etc. complete inlcuding cost of labour but excluding cost of material and fittings (cost of pump, cable, PVC Pipe, Contol panel, hanging arrangement like wire/rope to be paid separately) | 3 | job | 2,866.47 ₹8,599.41 | 2,066.91 ₹6,200.73 Lowest | 2,875.24 ₹8,625.72 |
| 7.00 | Supplying of 7.5 HP Submersible pump motor set (three phase 415 volt, 12 stage, speed of pump-2880 rpm) with Glass Noryl Polypropin impeller, stainless steel pump shaft, head-110 metre.Suction casing-cast iron and of approved make as per direction of EIC. | 3 | Each | 53,610.45 ₹1,60,831.35 | 38,710.39 ₹1,16,131.17 Lowest | 53,623.24 ₹1,60,869.72 |
| 8.00 | Supplying of three phase/ 415 volt Starter Control Panel of approved make suitable for 7.5 HP submersible pump consisting of volt metre, ammeter, on/off switch, starter, single phase preventer, overload protection, water level guard, dry run protection, under current protection all complete as per direction of EIC. | 3 | Each | 8,662.34 ₹25,987.02 | 6,250.35 ₹18,751.05 Lowest | 8,675.24 ₹26,025.72 |
| 9.00 | Supplying of PVC insulated and PVC sheathed flat submersible cable with copper conductor, 3 core 10 sq.mm as per direction of EIC. | 450 | Each | 335.42 ₹1,50,939 | 237.89 ₹1,07,050.5 Lowest | 365.24 ₹1,64,358 |
| 10.00 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work: 50 mm dia nominal bore | 900 | Metre | 553.08 ₹4,97,772 | 394.89 ₹3,55,401 Lowest | 572.42 ₹5,15,178 |
Tender Value
₹12.3 L
EMD Value
₹15,400
Closing Date
11 Jul 2026, 6:55 pmClosed
AE(C), RJML AREA
AREA OFFICE RAJMAHAL AREA, DHANKUNDA
Installation, of 03 nos. 7.5 HP Submersible pump inside existing borewell at Lalmatia thana, Vivah bhawan and near magazine road with all complete fitting under Rajmahal Area.
2026_ECL_361564_1
ECL/RJML/AGM/AE(C)/ e-Ten/26-27/89 Dt-01.07.2026
Open Tender
Water Supply/ Sanitation Works
Item Rate
30 days
Rajmahal Area
Please refer Tender documents.
3 documents required · 3 mandatory
₹15,400
2 Sept 2026
1 Jul 2026
13 Jul 2026
1 Jul 2026
11 Jul 2026
1 Jul 2026
1 Jul 2026 - 4 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Item Description/ Heading | - | - | - | - |
| 2 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of: 200mm dia. | - | Each | 243.9 | - |
| 3 | Providing and fixing M.S clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part-I), including necessary bolts & nuts of required size complete. 200mm clamp. | - | Each | 1,670.25 | - |
| 4 | Supplying of Nylon rope 25mm dia. | - | Metre | 58.1 | - |
| 5 | Supplying G.I pipes 50 mm dia nominal dia including fittings. | - | Metre | 452.85 | - |
| 6 | Lowering and commissioning of 7.5 HP Submersible pump in deep borewell with GI/ CPVC/PVC pipe including all accessories etc. complete inlcuding cost of labour but excluding cost of material and fittings (cost of pump, cable, PVC Pipe, Contol panel, hanging arrangement like wire/rope to be paid separately) | - | job | 2,861.95 | - |
| 7 | Supplying of 7.5 HP Submersible pump motor set (three phase 415 volt, 12 stage, speed of pump-2880 rpm) with Glass Noryl Polypropin impeller, stainless steel pump shaft, head-110 metre.Suction casing-cast iron and of approved make as per direction of EIC. | - | Each | 53,601.7 | - |
| 8 | Supplying of three phase/ 415 volt Starter Control Panel of approved make suitable for 7.5 HP submersible pump consisting of volt metre, ammeter, on/off switch, starter, single phase preventer, overload protection, water level guard, dry run protection, under current protection all complete as per direction of EIC. | - | Each | 8,654.25 | - |
| 9 | Supplying of PVC insulated and PVC sheathed flat submersible cable with copper conductor, 3 core 10 sq.mm as per direction of EIC. | - | Each | 329.4 | - |
| 10 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work: 50 mm dia nominal bore | - | Metre | 546.8 | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_374452.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 2.10 MB
Tendernotice_2.pdf
PDF • 1.38 MB
BOQ_374452.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .