Cleaning and repair work of drains located in Ward No. 69, 70 and 71 of Jhalana Zone.

(JMC)Desilting of covered nala/covered drain (which will incude continues covering for 5 mtr& above length at a stretch) including removing of stone patties, ferro cement drain covers, deismantling of existing cc flooring etc & replacing the same (without mortar & C & C etc) after desilting of nallah.specing of opening should not be more than 5mtr. or as per direction of engineer in charge with all lead & lift complete in all respect.

(JMC)Desilting of open Nallah open drain (which will include continues covering of less than 5mtr.Att a stretch) as per direction of engineer in charges with all lead & lift comlete in all respect.

Percentage BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE PART-B (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) (SOR 2023)

NUMBER #

(12.6.1)Standard Size 600x800mm (75mm thick) for span 300 to 450mm

(12.6.2)Standard Size 1000x800mm (100mm thick) for span 451 to 700mm

(12.6.3)Standard Size 1500x600mm (125mm thick) for span 701 to 1200mm

(12.6.4)Standard Size 2100x500mm (150mm thick) for span 1201 to 1500mm

(4.10.1.1)Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc.Depth upto 1.5 m

(21.1.8)Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:5:10 (1 cement : 5 fine/ coarse sand : 10 graded stone aggregate 40 mm nominal size)

(23.19.6)Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

(24.1.2)Brick work with FPS bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)

(23.1.3)Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

(25.1.1 )Random rubble masonry with hard stone in foundation and plinthCement mortar 1:6 (1 cement : 6 coarse sand)

(32.2.2)Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement : 6 fine/ coarse sand)

(12.7.1)Providing and fixing stone slab covering of required size over drains including filling of joints with cement sand mortar 1:3 complete as per direction of Engineer-in-charge. Average thickness 60 to 75 mm

(21.1.2)Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

(29.26.2)Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates asimilar works

Please Enable Macros to View BoQ information