SITC of CSSD Work for Cancer Hospital, Situated at Govt. Medical College Campus, Kannauj

Amount

WALL WORKING TABLE REAR FRAME 188 x 60 x 90CM Wall working table for surgical instruments made of AISl-304 stainless steel, with rubber caps. Equipped with anti-splash rear frame. Dimensions 1880 x 600 x 900 mm (Length x depth x height).

WASHING TABLE WITH ULTRASONIC AND 2 LEFT SINKS, 250 x 60 x 90 cm Ultrasounds washing table for surgical instruments, made of AISl-304 stainless steel. Provided with three washing sinks on the left hand, two for washing and the other one for ultrasounds with basket, lid and automatic drain, Equipped with frontal control panel. Supplied with a detachable shower, two water supplies, and a bottom shelf splash rear frame. Dimension 2500x600x900mm. (Length x Depth x Height) - Voltage: II 230V/50-60 Hz.

WATER/AIR PRESSURE CLEANING GUN Cold water/ pressurized air injector gun for cleaning of materials requiring a high degree of cleanliness of clinic of laboratory usage. Equipped with 8 nozzles to clean different kinds of instruments: a) for syringes and cannulas with record cones) for measuring and blood pipettes) for catheters, valves etc.) for drainage tubing) for syringes and cannulas with Luerconef) spray jet for rapid instrument cleaning) for bottles and Erlenmeyer flasks) water jet pump for suction cleaning.

WALL WORKING TABLE WITH REAR FRAME, 188 x 70 x 90 cm Wall working table for surgical instruments, made of AISl-304 stainless steel, with a bottom shelf and adjustable height legs with rubber caps. Equipped with anti-splash rear frame - Dimensions: 1880 x 700 x 900mm (Length x depth x height).

WALL WASHING TABLE SURGICAL INSTRUMENTS, TWO SINKS, 250 x 70 x 90cm Wall washing table for surgical with two central washing sinks with monobloc tap for two water supplies, drain valve, with a bottom shelf and adjustable height legs with rubber caps, equipped with anti-splash rear frame - Dimensions 2500x700x900mm (Length x depth x height).

LINEAR METERS WALL WORKING TABLEE 188 x 70 x 90 cm Wall working table for surgical instruments, made of AISI 304 stainless steel, with a bottom shelf and adjustable height legs with rubber caps, equipped with anti-splash rear frame-Dimensions: 188x 700 mm. (width x height)

CENTRAL WORKING TABLE WITH 2 DRAWERS, 188 x 88 x 90 CM Central working table for surgical instruments, made of AISl-304 stainless steel, with two drawers mounted on sliding guides and adjustable height legs with rubber caps Dimensions: 1880 x 880 x 900 mm (Length x depth x height) .

WIRE TRANSPORT TROLLEY WITH SHELVES Trolley for transport totally made of wire AISI 304 stainless steel with brakes Dimensions: 910 x 610 x 1000 mm (Length x depth x height).

DOUBLE DOOR WASHER DISINFECTOR: 300 Litre (Detail BOQ Attached in Technical Bid)

RACKS 4 LEVELS, to accommodate 12 Baskets for Washer Disinfector made of stainless steel.

4 MANUAL TRANSPORT TROLLEY FOR WASHER DISINFECTOR Stainless Steel.

BASKET 1/1 485 X 250 X 50 mm

ANESTHESIA TROLLEY. Made of Stainless Steel for anesthesia elements washing. It should be equipped with 6 connectors for anesthesia tubes, masks, gloves and other elements. It should be equipped with small baskets for tiny elements.

MANUAL PASS-THROUGH WINDOW, 90-170MM Made of AISI304 stainless steel, with two side guides along which the window plate slides. The window plate is made of transparent grey methacrylate, with a handle and with a windowsill on which the window is supported when closed. Total dimensions= 1300 x 750 mm. The design of the window allows its installation in walls of thickness from 90 to 170 mm.

PREPARTION AND PACKING AREA (B)

CENTRAL WORKING TABLE WITH 2 DRAWERS, 188X88X90 CM (Approx.) Central working table for surgical instruments, made of AIS-304 stainless steel, with two drawers mounted on sliding guides and adjustable height legs with rubber caps- Dimension: 1880 x 880 x 900 mm (length x depth x height) Approx.

ROLLS DISPENSER WITH CUTTER ROLLS Dispenser made of AISI 304 stainless steel, provided with cutter attached to the roll dispenser. Approx cut length: 750 mm.

TROLLEY SUPPORT PAPER STAINLESS STEEL 1410*725*995 mm WITH LOWER GRILLE.

WIRE TRANSPORT TROLLEY WITH 2 SHELVES Trolleys for transport. Totally made of wire AISI 304 stainless steel. With two shelves and four wheels. Two of them with brakes. Dimensions:910 x 610 x 1000 mm (length x depth x height)

TEXILES STORE (C)

MANUAL PASS-THROUGH WINDOW, 90- 170MM Made of AISI-304 stainless steel, with two side guides along which the window plate slides. The window plate is made of transparent grey methacrylate, with a handle and with a windowsill on which the window is supported when closed. Total dimensions = 1300 x 750 mm The design of the window allows its installation in walls of thickness from 90 to 170 mm.

CENTRAL WORK TABLE 1300 X 60 X 90CM Central work table for surgical instruments, made of AISI 304 stainless steel, with adjustable height legs with rubber caps.- Dimensions: 1300 x 600 x 900 mm (length x width x height).

WIRE HIGH SHELF, 4 LEVELS, 122 X 61 X 190 CM High wire shelf, equipped with four shelves made of plated AISI 304 steel wire covered with a stainless "epoxy" heat and cold resistant layer. Its construction allows air circulation.- Dimensions: 1220 x 610 x 1900 mm. (length x width x height)

LINEN PREPARATION AND PACKING AREA (D)

TABLE TO CHECK TEXTILES 180 X 88 X 90CM Table designed for the classification of clothing. Made of AISI-304 stainless steel, with an instruments glass screen under which four lights are placed, With adjustable height legs with rubber caps. Dimensions: 1800 x 880 x 900 mm (length x Width x height) Voltage: II 110/230 V, 50/60 Hz. - Power: 0.5 KW.

CENTRAL WORKING TABLE WITH 2 DRAWERS, 188X88X90 CM Central working table for surgical instruments, made of AISI -304 Stainless steel, with two drawers mounted on sliding guides and adjustable height legs with rubber caps Dimension: 1880 x 880 x 900 mm (length x depth x height).

ROLLS DISPENSER WITH CUTTER ROLLS Dispenser made of AISI 304 stainless steel, provided with cutter attached to the roll dispenser. Approx. cut length: 750 mm.

TROLLEY SUPPORT PAPER STAINLESS STEEL 1410*725*995 mm WITH LOWER GRILLE.

CENTRAL MOBILE RACK WITH WHEELS Central mobile rack for wire baskets made of AISI304 stainless steel. Equipped with four wheels, two of them with brakes.- Dimensions: 465 x 600 x 1600 mm (length x width x height)- Capacity: 4 + 4 baskets.

WIRE TRANSPORT TROLLEY WITH 2 SHELVES Trolleys for transport. Totally made of wire AISI 304 stainless steel. With two shelves and four wheels. Two of them with brakes. Dimensions: 910 x 610 x 1000 mm (length x depth x height).

STERILIZATION AREA (E)

STEAM STERILIZER, STU-6, 425 L, 2 DOORS (Detail BOQ Attached in Technical Bid)

MAINTENANCE DOOR 650 MM Maintenance access door (650 mm width). Recessed door with mesh and manufactured in AISI-304 stainless steel. Light of 530*1890 mm. Including a top lintel with 200 mm height. Total height: 2196 (1998 + 198). Designed for the panelling of sterilization areas with maintenance areas. As standard, it is supplied with the right opening. Upon request, it can be requested with the left opening.

EXTERNAL LOADING/UNLOADING TROLLEY FOR STEAM STERILIZER Made of AISI 304 stainless steel, with a fixing system between the trolley and chamber guides with four high-quality wheels, two of them with brakes and blocking system.

LOADING PLATFORM FOR STEAM STERILIZER Made of AISI-304 stainless steel fine mesh, with butts and four temperature-resistant Teflon wheels. Will meet international standards directives i.e US-FDA/ European CE with 4- digit Notified No ISO-13485, ISO 9001, ISO 14001, PED 2014/68/EU & HYGCEN Accreditation MDD 93/42/EEC Medical Device Directive

PLASMA STERILIZER Capacity: 135 Ltr. (Detail BOQ Attached in Technical Bid)

RAPID STERILIZER TABLE TOP (CAPACITY 24 LTR) (Detail BOQ Attached in Technical Bid)

STORING RACK 6 SECTIONS S1000 Central frame for basket storing (sterilizer S1000). Made of AIS-304 stainless steel and capacity for 6 racks (three x three). Intended for placement in the central part of a room, -Dimensions: 1950 x 600 x 2150 mm (Length x width x height)

STACKABLE LOADING BASKET FOR STERILIZERS, 58X30X28 CM Stackable loading basket of 1 SM (according to EN285) for sterile material. Made of electro-polished AISI 304 stainless steel. Dimensions: 580 x 300 x 280 mm, (length x width x height)

STACKABLE LOADING BASKET FOR STERILIZERS, 58X30X14 CM Stackable loading basket of 1/2 SM (according to EN285) for sterile material. Made of AISI 304 stainless steel. Dimensions: 580 x 300 x 140 mm. (length x width x height)

WIRE HIGH SHELF, 4 LEVELS, 122X61X190 CM High wire shelf, equipped with four shelves made of plated AISI304 steel wire covered with a stainless "epoxy" heat and cold-resistant layer. Its construction allows air circulation. Dimensions: 1220 x 610 x 1900 mm. (length x width x height)

WIRE TRANSPORT TROLLEY WITH 2 SHELVES Trolleys for transport. Totally made of wire AISI 304 stainless steel. With two shelves and four wheels, Two of them with brakes. Dimensions:910 x 610 x 1000 mm (length x depth x height)

CENTRAL WORK TABLE 1100x60x90CM Central work table for surgical instruments, made of AISI-304 stainless steel, with adjustable height legs with rubber caps- Dimensions: 1100 x 600 x 900 mm (width x height)

MANUAL PASS-THROUGH WINDOW, 90-170MM Made of AISI- 304 stainless steel, with two side guides along which the window plate slides. The window plate is made of transparent grey methacrylate, with a handle and with a windowsill on which the window is supported when closed. Total dimensions = 1300 x 750 mm The design of the window allows its installation in walls of thickness from 90 to 170 mm.

LOW CLINICAL SHELF, 1100X48X90 CM low shelf made of AISI-304 stainless steel, provided with adjustable legs with rubber caps, upper working surface and lower shelver,- Dimensions: 1100 X 480 X 900 mm. (length x depth x height)

CUPBOARD TROLLEY FOR STERILE MATERIAL Equipped with two shelves, with a capacity for 6 sterilization units (modules of 600 x 300 x 300 mm). manufactured in anodized aluminum, offering the following advantages: Light Resistant to corrosion- High thermal conductivity allowing a fast drying­ Resistant to the thermal treatment of washing and sterilization. The doors can be opened at a 2700 angle, with a stopping device at 260 for being washed in a washing tunnel. Equipped with an ergonomics double handle placed on one side of the trolley. Supplied with the central brake system. Dimensions: 1077 x 720 x 1505 mm (width x depth x height)

WATER SOFTENER water softener with 2 bottles of 601 resins each. Regeneration by twin system allowing the water supply during 24 h uninterrupted with a salt tank of 200 kg, - Each column dimensions: 360 x 1315 mm (diameter x height)- Salt tank dimensions: 570 x 1000 mm (diameter x height)- water production (5OHF): 15.120 litres/day- salt consumption: 24 kg per regeneration- Maximum flow: 4800 1/h- Voltage: I1 230V/50 Hz

REVERSE OSMOSIS TREATMENT PLANT Equipped with: - Pre- filtration of sediments (high grade)- pre-filtration for the removal of chlorides with granular activated carbon-Pre-filtration of sediments (low grade 5 micra)- Reverse osmosis device- Approx. production:125 i/h- Assembled on a glass fibre panel-pressure pump in stainless steel with magnetic coupling of 0.5 HP- Reverse osmosis membrane 800 GPD- Controller with indicator display- Tank of 750L with pump

Plumbing Work

Bidder shall provide 05 year CAMC after 05 year warranty period.

CAMC 6th Year after five year free warranty

CAMC 7th Year (after five year free warranty)

CAMC 8th Year (after five year free warranty)

CAMC 9th Year (after five year free warranty)

CAMC 10th Year (after five year free warranty)

PES INSTALLATIONS (P) LTD.