Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.2 LAccepted-AOC H NO 281 PHASE III HOUSING BOARD BADDI TEHSIL BADDI DISTRICT SOLAN HP | ₹3.2 L | L1 | Accepted-AOC Accepted |
| 2 | L-2₹3.8 LRejected-Finance | ₹3.8 L | L-2 | Rejected-Finance Rejected |
| 3 | L3₹4.8 LRejected-Finance | ₹4.8 L | L3 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | m/sbalagi contector L3 | SAUNKHLA ENTERPRISES L2 | ANITA KUMARI CONTRACTOR L1 |
|---|---|---|---|---|---|---|
| 1.00 | Supply, erection, testing & commissioning of submersible pumping set of make KSB /Kirloskar/BS/crompton with suitable Modal & stage with 5.00 HP conforming to latest relevent BIS code. The pump should be fitted with free flow impellers of bronze /suitable alloy as per BIS 5659 or latest with up to date ammendments suitable for raw/clear water having charcterstcs as mentioned in item No.1 greased packed bearings & shell with wound stator on motor side & with shaft protection to a submersible pump side ensuring better life for shaft conforming to BIS specifications. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of Kirloskar/NGEF/Jyoti / Crompton make conforming to relevent BIS code with up to date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber chamber & grease packed lubricated bearings & provided with stainless steel thrust bearing plate to withstand non vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guard, errection clamps, cable clips & depth gauge etc. & suitable for operation on data given below:-The power of motor should be atleast 10% on excess of the maximum power required by the pump in operation range & (-) 15 % of the duty point head. | 1 | 5 HP | 1,10,000 ₹1.1 L | 87,000 ₹87,000 | 75,000 ₹75,000 |
| 1.01Total Head :- 171.60 mtrs. | ||||||
| 1.02Discharge (Q) :- 0.96 LPS. | ||||||
| 1.03Dia of Rising main (in mm) 40 mm dia. | ||||||
| 2.00 | Provision for lifting and lowering of pump and motor including testing complete all respect. | 1 | Job | 10,000 ₹10,000 | 5,000 ₹5,000 | 6,000 ₹6,000 |
| 3.00Providing and fixing fully automatic control pannel with push button start star delta starter for submersible pump set of KSB/Kirloskar/ BS /Crompton or any other reputed make fabricated with MS Sheet and angle duly painted and complete with internal wiring comprising of main switch of including auto start a auto stop facility, single phase preventor, three phase indicator timer, relay, selector switch, auto start, stop facility etc. with manually start, stop facility with in all respects. | ||||||
| 3.01 | 1 No. panel (Suitable for 5.00 HP Submersible Machinery ). | 1 | 5 HP | 50,000 ₹50,000 | 27,000 ₹27,000 | 30,000 ₹30,000 |
| 4.00 | Supply and errection of PVC 3 core jointless, flat water proof submersible cable Havells /Finolex /L&T make 4.00mm sq. size as per BIS 694-1998 latest with up date amendments, suitable for the pumpsets offered from MCB to motor includin all other electrical equipments/ accessories such as thimble, flexible pipe, solder, nuts and bolts, cable glands, clips etc, laid in pipes or trenches under floor. The type, size and make shall be subject to approval of HPSEB authorities. | 105 | Mtrs | 400 ₹42,000 | 350 ₹36,750 | 310 ₹32,550 |
| 5.00 | Providing and Fixing PVC pipe 40 mm dia , class 10Kg/Cm2 pressure including sockets and other fitting material etc. | 100 | Mtrs | 290 ₹29,000 | 380 ₹38,000 | 250 ₹25,000 |
| 6.00 | Providing and Fixing PVC rope wire size 8 mm thick for supporting of motor and lowering pipe. | 105 | Mtrs | 125 ₹13,125 | 80 ₹8,400 | 110 ₹11,550 |
Tender Value
₹3.4 L
EMD Value
₹6,704
Closing Date
14 Nov 2025, 11:00 amClosed
Executive Engineer
Jal Shakti Division Baddi
(SH Providing erection of submersible pumping Machinery of 5.00 HP with allied accessories to newly drilled Hand pump at village Talad).
2025_HPIPH_119776_1
NIT No. 14028-128 Dt. 06-11-2025
Open Tender
Civil Works
90 days
Baddi
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
₹6,704
14 Jan 2026
6 Nov 2025
14 Nov 2025
6 Nov 2025
14 Nov 2025
6 Nov 2025
6 Nov 2025 - 13 Nov 2025
Amount
Supply, erection, testing & commissioning of submersible pumping set of make KSB /Kirloskar/BS/crompton with suitable Modal & stage with 5.00 HP conforming to latest relevent BIS code. The pump should be fitted with free flow impellers of bronze /suitable alloy as per BIS 5659 or latest with up to date ammendments suitable for raw/clear water having charcterstcs as mentioned in item No.1 greased packed bearings & shell with wound stator on motor side & with shaft protection to a submersible pump side ensuring better life for shaft conforming to BIS specifications. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of Kirloskar/NGEF/Jyoti / Crompton make conforming to relevent BIS code with up to date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber chamber & grease packed lubricated bearings & provided with stainless steel thrust bearing plate to withstand non vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guard, errection clamps, cable clips & depth gauge etc. & suitable for operation on data given below:-The power of motor should be atleast 10% on excess of the maximum power required by the pump in operation range & (-) 15 % of the duty point head.
Total Head :- 171.60 mtrs.
Discharge (Q) :- 0.96 LPS.
Dia of Rising main (in mm) 40 mm dia.
Provision for lifting and lowering of pump and motor including testing complete all respect.
1 No. panel (Suitable for 5.00 HP Submersible Machinery ).
Supply and errection of PVC 3 core jointless, flat water proof submersible cable Havells /Finolex /L&T make 4.00mm sq. size as per BIS 694-1998 latest with up date amendments, suitable for the pumpsets offered from MCB to motor includin all other electrical equipments/ accessories such as thimble, flexible pipe, solder, nuts and bolts, cable glands, clips etc, laid in pipes or trenches under floor. The type, size and make shall be subject to approval of HPSEB authorities.
Providing and Fixing PVC pipe 40 mm dia , class 10Kg/Cm2 pressure including sockets and other fitting material etc.
Providing and Fixing PVC rope wire size 8 mm thick for supporting of motor and lowering pipe.
Providing and Fixing cast steel sluice valve of following diametre an class, as per BS:1414/API:600 Leader/Kirloskar/Kartar make i/c MS flange of Table- 17 as per IS:6392-1971 with welding of MS flanges in two layer on both faces including carriage complete in all respect with in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
40mm dia class ASA:150
Providing and Fixing cast steel reflux valve (swing type) of following diametre an class, as per BS:1868/API:6D Pelicon/Leader/Kirloskar make i/c MS flange of Tab 17 as per IS:6392-1971 with welding of MS flanges in two layer on both faces including carriage complete in all respect with in all leads and lifts and to the entire satisfaction of the Engineer in Charge.
40 mm dia class ASA-150
P/F MS Sheet box for 5 HP motor starter and Panel board including carriage of material and with in leads and lifts as per direction of Engineer-in-Charge.
Excavation in drains and channels etc. in all kinds of soil such as pick work, jumper work, blasting , soft and hard rock and through conglomerate rock upto all lelads and lifts stacking the excavated soil not more than 3 meters clear from the edge of excavation and then returning the stacked soil in trenches consolidatig each deposited layers by ramming and watering and then disposing of all surlus excavated material within all leads and lifts and like as directed by the Engineer-in-Charge including Jungle clearance.
Laying, jointing (Screwed & socketted) and testing of GMS tubes conforming to IS:1239-1990 (Part-1), in trenches complete in all respect (The earth work in trenches to be measured & paid for separately) (Light Class).
32mm dia.
Welding of rising main pipe line i/c carriage of welding set and generator set at site complete in all respect and as per the direction Engineer-in-Charge.
32 mm dia
SAUNKHLA ENTERPRISES (BID ID -581608)
m/sbalagi contector (BID ID -581351)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.21 MB
PWD6.pdf
Tender Documents • 0.25 MB
TandC.pdf
Tender Documents • 2.12 MB
BOQ_175353.xls
BOQ • 1.65 MB
PWD8.pdf
Tender Documents • 1.33 MB
Download all tender documents and submit your bid