Theroor Town Panchayat Dormant Fund 2023-24 Pavor Block Work

Amount

Construction of Granular Sub-base by providing close graded material,mixing in a machanical mix plant at OMC,carriage of mixed material to work site,spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to acheive the desired density,Complete as per clause 401.

Earthwork excavation in all soils and sub soils except hard rock requiring blasting with initial lead and lift including re-filling the sides of foundation in layer of 15 cm thick watering , ramming ,depositing the surplus earth in the premises as directed by departmental officers etc., complete as per SS 20 B TNDSS NO: 23&24VI (S2), VII 9,10

Plain cement concrete Using 1:4:8 mix ( One cement , four Sand and Eight aggregates) using 40 mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying,consolidating and curing etc complete as per the standard specifications. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII

Supplying and erecting shuttering including necessary supports plain surfaces in foundation and basement in all floors for reinforcement cement concrete works such as pedestal bed blocks, staircase steps, RCC column, grade beams, plinth beam etc. using mild steel sheets of size 90x60 cm and B.G. 10 guage stiffened with welded mild steel angles of size 25x25x3 mm for boarding laid over si,lver oak country wood joists of size 10x6.5 cm spaced at about 90 cm center to center and supported with casurina props of 10 to 13 cm dia spaced at 75 cm center to center at suitable intervals etc. complete complying with standard specification.

Plain Cement concrete 1:2:4 (one cement, two sand and four aggregates) using 20mm ISS HBG metal including cost of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per standard specifications. TNDSS NO: 30 V,VI (S3) VII-3

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 150 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5.

Supplying and laying Cement concrete Rubber Moulded Hydraulic Pressed Paver Block M40 grade of 80mm thick high strength type confirming IS 15658-2007 of required size of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurrying bone pattern with stone dust cushion 100mm thick laying out of pavement cut the pieces to fix the edge vibrating the pavers, sweeping, transporting loading and unloading of paver block as per the standard specification.