C/O 1 No. Ty-IV and 4 Nos. Type_III Qtr. for the employees of Animal Husbandry department at Reckong Peo in District Kinnaur (HP) (SH-Building portion, WS and SI, rain water harvesting system and site development etc.

Amount

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains in all length and width , including dressing of sides and ramming of bottoms, lift upto 1.5 m (One point five metre)to all height, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts in all kinds of soil complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavation in earth work in hilly area in all heights and depths and in all kinds of soil manual/ mechanical means including saturated soil comprising of mixed soil, ordinary rock and hard rock and all work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side , water polution , etcetra and to protect stability of hill side, the track shall be excavated with chiseling and wedging-out of rock (where blasting is prohibited) , All earth work in cutting/ excavation, including rock excavation shall be carried out true to lines, grades, side slopes, width chamber , super elevation and lable as soon on the drawings or as directed by the Enginner-in-charage The recovery for stone wheather useful or not for 1427.29cum (one thousand four hundred twenty seven point twenty nine cubic meter) in all cases @ Rupees 300 only ( Rupees three hundred only) per cubic meter shall be efected on pro data basis for the each bill of contractor ,which shall have to be duly compensatedby him in all cases.including haulage of mateial with in all leads, lifts and carriage of materials and as directed by the Engineer in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Filling with available excavted earth (exculding rock) in trenches, plinth, sides of foundation etctra in layer not exceding 20 cm (twenty centimeter) in depth consolidating each deposited layer by the ramming and watering complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming,consolidating and dressing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Boulder/stone filling hand packed under floors, complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering upto plinth level complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Cement concrete grade 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size.

Cement concrete grade 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate) 40mm ( forty millimetre) nominal size.

Cement concrete grade 1:3:6 (one cement : three coarse sand : six graded stone aggregate) 40mm ( forty millimetre) nominal size.

Providing and laying damp-proof course 50mm (Fifty millimeter) thick with cement concrete 1:2:4 (One cement : Two coarse sand) : Four graded stone aggregate 20mm (twenty millimeter) nominal size complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 (ten) of approved quality using 1.7kg (one point seven kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Making plinth protection 50mm (fifty millimeter) thick of cement concrete 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm nominal size) over 75mm (seventy five millimeter) thick bed of dry brick ballast 40 mm (forty millimter) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying in position reinforced cement concrete 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimeter) norminal size) excluding the cost of centering, shuttring, finishing, and reinforcement in foundation and footing , basses of columns and the like and mass concreate, all work upto plinth level complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position reinforced cement concrete 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimeter) norminal size) excluding the cost of centering, shuttring, finishing, and reinforcement in walls (any thickness) including attached pilaster, buttresses, plinth and string coureses, fillets, columns,pilliars, piers, abutments,posts, and structs, etctra all work above plinth level upto floor all level complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position reinforced cement concrete 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimeter) norminal size) excluding the cost of centering, shuttring, finishing, and reinforcement in beams ,suspended floors, roof having slope up to 15 Degree( fifteen Degree ), Landing, balconies, shelves, chajjas, lintels, bands, plain, window sills,staircases and spiral staircases , etctra all work above plinth level upto floor all level complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form work complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Foundations, footings, bases for columns

Suspended floors, roofs, landings, balconies and access plat form

Shelves (in cast situ)

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, piers, abutments, pillars, posts and struts

Stairs, (excluding landings) except spiralstaircases

Small lintels not exceeding 1.5m (one point five meter) clear Span , mouldings , window cills etc.

Edges of slab and break in floors and walls under 20cm (twenty centimeter) wide

Walls (ant thickness) including attached pilasters,butteresses,plinth and string courses etc

Steel reinforcement (TATA /SAIL / JINDAL PANTHER/RINL) for R.C.C. (Reinforcement cement concrete) work including straightening, cutting, bending, placing in position and binding complete including cost of binding wire plinth level upto floor all level Thermo-Mechanically Treated bars of grade Fe-500D (Five hundred D) or more steel bars complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing up to floor five level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (one cement : three coarse sand), cost of required centering, shuttering 1:1½:3 (one Cement: one and half coarse sand: three graded stone aggregate 20mm( twenty millimeter) nominal size) .complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor level in all shapes and sizes Cement mortar 1:6 (one cement : six coarse sand) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20 mm(twenty millimter) thick Baroda marble having semi round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platform, vanity counters, window sills, facias and similar locations required size, approved shade, color and texture laid over 20mm (twenty millimter) thick base cement mortar 1:4( one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moudling and polishing to edges to give high gloes finish ecttra complete at all levels complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm ( twenty five millimeter) dia chromium plated brass curtain rod having wall thickness of 1.25mm ( one point two five millimetre) with two chromium plated brass brackets fixed with C.P. brass screws and PVC (Polyvinyl chloride) sleeves etcetra wherever necessary complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 19mm (ninteen millimeter) thick Commercial Board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (ninteen millimeter) thick Commercial Board in shelve box for cup boards with butt joints & fixing with nails & screws etc. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. (miled steel) (TATA/SAIL/Apollo/JSW Make ) grills of required pattern in frames of windows etcetera with M.S.(miled steel) flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to Stell windows by welding complete upto all floor including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 40x5 mm(forty into five millimeter) flat iron hold fast 40 cm(forty centimeter) long including fixing to frame with 10 mm(ten millimeter) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm(thirty into ten into fifteen centimeter) 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate 20mm(twenty millimeter) nominal size).complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing oxidised M.S. (Mild steel) casement stays (straight peg type) with necessary screws etc. complete.250 mm (two hundred fifty millimeter) weighing not less than 150 gms (one fifty gram) complete upto all floor including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 50 mm (Fifty millimeter) special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 50 mm (Fifty millimeter) bright finished brass cup board or wardrobe knob of approved quality with necessary screws. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, (Indian standard Three thousand five hundred sixty four) embossed on the body, door weight upto 36 kg to 80 kg (thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (Seven hundred one millimeter to one thousand millimeter)), with double speed adjustment with necessary accessories and screws etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing aluminium sliding door bolt anodized transparent or dyed to required shade and colour with bolts and nuts screws etc.complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

300x16mm (three hundred into sixteen millimeter)

250x16mm (two hundred fifty into sixteen millimeter)

Providing and fixing aluminium tower bolts (Berrel type) anodized transparent or dyed to required shade and colour with screws etc. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

250x10mm (two hundred fifty into ten millimeter)

150x10mm (one hundred fifty into ten millimeter)

Providing and fixing aluminium handles anodized transparent or dyed to required colour or shade with necessary screws etc. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

125mm (one hundred twenty five millimeter)

100mm (one hundred millimeter)

Providing and fixing aluminium hanging floor door stopper,ISI(Indian standard) marked,anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (Indian Standard one thousand eight hundred sixty eight)) transparent or dyed to required colour and shade, with necessary screws etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing double rebates MS(mild steel) (TATA/SAIL/Apollo/JSW Make ) channel irondoors window clerestry window frame manufacturing frame MS (miled steel) section 75x40mm(Seventy five into forty millimeter) and MS(miled steel) FLAT 40X10mm(forty into ten millimeter) as per direction of engineer-In-Charge and approved drawing including hinges lock jambs beed and if require angle thrash hold of miled steel angle 50X25mm ( fifty into twenty five millimeter) weled or rigidly fixed by mechanically means lugs with split and tails to each jambs, including steel but hinges 2.5mm(two point five millimeter) thick with provISI(Indian Standards Institute)on for locking observer as specified and applying a coat of approval steel primer after pre-treatment of the surface. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI(Indian standard Institute) marked M.S.(Mild Steel) pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Deodar wood complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wire gauge shutters using galvanised M.S. (mild steel) wire gauge of I.S. gauge designation 85 G. (eighty five gram) with wire of dia 0.56 mm (Zero point fifty six millimeter) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 2nd (second) class Deodar Wood complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing double rebates MS(Mild Steel) channel iron doors window clerestry window framminfg manufacturing frame MS (Mild steeel)section 125x65mm (one hundard twenty five into sixty five millimeter) and MS (Mild steel)FLAT 40x10 mm(forty into ten millimeter) as per direction of Engineer- In -Charge and apporoved drawing including hinges lock jambs beed and if require angle thrash hold of mild steel angle 50X25 mm(fifty into twenty five millimeter) welded or rigidly fixed by mechanically means lugs with split and tails to each jambs including steel but hinges 2.5 mm(two point five millimeter) thick with provision for locking observer as specified and applying a coat of approval steel primer after pre-treatment of the surface .complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing laying steel work of (TATA,SAIL or RASHTRIYA ISPAT) welded in built up section/ hollow section trusses & framed work, including cutting,hoisting & fixing in position including applying a priming coat of red lead paint in beams joists channels, angles, tee,flats with connecting plates or angle cleats as in main and cross beams, hip and rafters,purlins connected to common rafters and the like complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing M.S.(Mild steel) fan clamp type I or II of 16 mm (Sixteen millimeter) dia M.S. (mild steel) bar, bent to shape with hooked ends in R.C.C. (Reinforcement cement concrete) slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Steel work welded in built up sections (TATA/SAIL/Apollo/JSW Make ) framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing miled steel tube (TATA/SAIL/Apollo/JSW Make ) hand rail of approved size by welding etcetra to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Precast terrazo tiles 22 mm (Twenty two millimeter) thick with graded marble chips of size upto 12 mm(twelve millimeter) ,laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm (Twenty millimeter) thick bed of cement mortar 1:4 (one cement:four coarse sand) : Light shade pigment using white cement complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Precast terrazo tiles 22 mm (Twenty two millimeter) thick with graded marble chips of sizes upto 12 mm(twelve millimeter), in skirting and risers of steps not exceeding 30 cm(thirty centimeter) in height, on 12 mm(twelve millimeter) thick cement plaster 1:3 (one cement : three coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Light shade pigment using white cement complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

6 mm(six millimeter) thick White glazed tiles dado (30x45cm) (thirty into forty five centimeter) in skirting risers of steps and dado 12 mm(twelve millimeter) thick cement mortar 1:3 (one cement :three sand) and jointed with cement slurry.complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm (three hundred into three hundred millimeter) or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622(indian standard : fifteen thousand six hundred twenty two), of approved make, in colours White, Ivory, Grey, Fume Red Brown,laid on 20 mm(twenty millimeter) thick cement mortar 1:4 (One Cement: Four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square meter) including grouting the joints with white cement and matching pigments etc., complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 0.60mm(zero point six zero millimeter) thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20(twenty) microns over 5 (five)microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm(six millimeter) dia metre with prepainted limpet and rubber washers complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm(sixty centimrter) over all with 0.45mm (zero point four five millimeter)thick prepainted steel sheets of TATA DURASHINE in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20(twenty) microns over 5(five) microns primer coating+ back coat of polyster of 5(five) microns over 5(five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6 mm dia (six millimeter diameter) & prepainted G.I.(galvanized Iron) limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing valley 90 cm(ninty centimeter) over all 0.45 mm(zero point four five) thick prepainted steel sheet of TATA DURASHINE in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5(five) microns over 5(five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm(six millimeter) dia with prepainted G.I.(galvanized Iron) limpet and bitumen whashers complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 30 cm (thirty centimeter) wide, 45 cm (forty five cemntimeter) overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm (forty into three millimeter) size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm (zero point eighty millimeter) thick with zinc coating not less than 275 gm/m² (two hundred seventy five gram per square meter) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing M.S. B.P. sheet 2 mm(two millimeter) thick in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured & paid separately) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing plain multipurpose cement board(Hight pressure steamcured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Single socketed pipes 110mm (one hundred ten millimetre) dia of Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 (indian standard : thirteen thousand five hundred ninty two ))Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand : three hundred eighty two), leaving 10 mm ( ten millimetre) gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wal faces PVC (Poly venyl Choloride) (D-Plast) accessories for rain water pipes i/c fitting the joints with approved adhesive complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Coupler

Single Pushfit Coupler 110mm (one hundred ten millimeter)

PVC Bend 110mm dia.(one hundred ten millimeter)

15 mm ( fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:6 ( one cement : six Fine sand) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

6 mm ( six millimetre )Thick plaster on cement concrete or reinforced cement concrete work with a cement mortar 1:3(one cement : three fine sand) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Extra for plastering done on moulding, cornices or architraves including neat finish to line and level: complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Pointing on stone work with cement mortar 1:3 (one cement : three fine sand) :Flush/ Ruled pointing complete in all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc e New work (Two or more coat applied @ 1.67 ltr/10 sqm (one point sixty seven liter per ten square meter) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm (two point twenty kilogram per ten square meter) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm (zero point ninty litre per ten square meter) over an under coat of primer applied @ 0.80 ltr/10 sqm (zero point eighty litre per ten suare meter) of approved brand and manufacture complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and applying white cement based (Birla White/ J.K ) putty of average thickness 2 mm ( Two millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm (zero point ninty litre per ten square meter) over an under coat of primer applied @ 0.80 ltr/10 sqm (zero point eighty litre per ten suare meter) of approved brand and manufacture complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete :150mm (one hundred fifty millimeter) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Construction coursed rubble hammer dressed U shaped open surface drain with side wall 15x22 cm(fifteen into twenty two centimeter) in cement mortar 1:6(one :six) and inside plastering with cement mortar 1:3(one:three) including earth work and laying 10 cm (ten centimeter)cement concrete in 1:5:10 (one cement:five sand:ten aggregate)of 40 mm(forty millimeter) nominal size and 7.5 cm(seven point five centimeter) cement concrete 1:2:4 (one cement :two approved sand : four graded crushed stone aggregate of 20 mm(twenty millimeter) nominal size ) and finished with a floating coat of neat cement complete as per standard design. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with :5.5 mm (five point five millimeter) thick glass panes. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavation tranch of required width of pipes cables etc.Pipes, cables etc, not exceeding 80 mm(Eighty millimeter) dia. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing water closet squatting pan (Indian type W.C. (water closet) pan CERA, HINDWARE, PARRYWARE, mak ) with 100 mm (One hundrd millimeter) sand cast Iron P or S trap, 10 (ten) litre low level white P.V.C. (poly vinyl choloride) flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231 (Indian standard : seven thousand two hundrd thirty one), with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. (water closet) pan of size type foot rests 580x440 mm (Five hundred eighty into four hundred forty millimter) with integral complete at all floor including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type of CERA, HINDWARE, PARRYWARE, make) with soft closing seat and lid, 10 (ten) litre low level white vitreous china flushing cistern CERA,HINDWARE, PARRYWARE make) and C.P. flush bend with fittings and C.I. (cast iron) brackets, 40 mm ( forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. (water closet)pan with ISI (Indian Standard Institue) marked white solid plastic seat and lid hindware or cera EWC No 20049 ( twenty thousand forty nine) Snow White Shade complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing wash basin with C.I. ((cast iron) brackets, 15 mm(fifteen millimeter) C.P. brass pillars taps ,32mm(thirty two millimeter) C.P. brass waste of standard pattern, including painting of fitting and brackets , cutting and making good the walls where ever required White vitreons China washbasin size 550X400 mm (five hundred fifty into four hundred fifty millimeter) with a pair of 15mm(fifteen millimeter) C.P. brass pillar tape complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing white vitreous china pedestal (CERA, Parryware, Hindware, Sanitaryware) for wash basin completely recessed at the back for the reception of pipes and fittings complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Stainless Steel A ISI (18/8)(Indian standard institute) kitchen sink 510X1040 mm (five hundred ten into one thousand forty millimeter) bowl depth 178 mm (one hundred seventy eight millimeter) as per IS: 13983(Indian standard Thirteen thousand nine hundred eighty three) with C.I. brackets and stainless steel plug 40 mm (forty millimeter), including painting of fittings and brackets, cutting and making good the walls wherever required : complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 15mm (fifteen millimetre) nominal dia CP(chrome plated) Brass Single lever telephonic wall mixer of quality and make as approved by Engineer in charge make of Jal, Jaquar Parryware, Hindware complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 40mm (forty millimeter)dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe . complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) make of Atul,Modi Guard Golden Fish complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P.(chromium plated) brass brackets and guard rail complete fixed with 40 mm (forty millimeter) long screws, rawl plugs etc., complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing C.P. (chromium plated) brass toilet paper holder complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

110mm(one hundred ten millimeter) diameter

75mm(seventy five millimeter) diameter

Providing and fixing PVC Clamps ISI (Indian Standard Institute) marked of adhesive design with steel screws and rawl plugs etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

110mm(one hundred ten millimeter) diameter

75mm(seventy five millimeter) diameter

Providing and fixing PVC(Polyvinyl chloride) single equal branch with oval access door, ISI (Indian Standards Institute) marked insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

110mm(one hundred ten millimeter) diameter

75mm(seventy five millimeter) diameter

Providing and Fixing PVC plain double equal branch ISI(indian standard institute) marked complete including fixing with approved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

110mm(one hundred ten millimeter) diameter

75mm(seventy five millimeter) diameter

Providing and fixing PVC (Polyvinyl chloride) door bend with oval access door,insertion rubber washer 3mm(three millimeter) thick bolts and nuts ISI(Indian Standards Institute) marked complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

110mm(one hundred ten millimeter) diameter

75mm(seventy five millimeter) diameter

Providing and fixing PVC (Polyvinyl chloride) collars ISI(Indian Standards Institute) marked including fixing with aprooved adhesive etc complete complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

110mm(one hundred ten millimeter) diameter

75mm(seventy five millimeter) diameter

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :110 mm X 75 mm.(one hundred ten into seventy five millimeter) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (one cement : three coarse sand :six graded stone aggregate 12.5 mm (twelve point five millimeter) nominal size), including necessary plaster and pointing in cement mortar 1:4 (one cement : four coarse sand) :complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

110mm(one hundred ten millimeter) diameter

75mm(seventy five millimeter) diameter

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm(six hundred millimeter) long towel rail with total length of 645 mm(six hundred forty five), width 78 mm(seventy eight millimeter) and effective height of 88 mm(eighty eight millimeter), weighing not less than 190 gms(onehundred ninty gram). complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450(indian standard fifteen Thousand four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

1216 (16mm OD (sixteen millimeter out side dia) ) pipe

1620 (20 mm OD (twenty millimeter out side dia) ) pipe

2532 (32 mm OD (thirty two millimeter out side dia) ) pipe

Providing and fixing G.I. (galvanised iron) pipes complete with G.I. (galvanised iron)fittings including trenching and refilling etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

15 mm(fifteen millimeter) dia nominal bore

20 mm(twenty millimeter) dia nominal bore

32 mm(thirty two millimeter) dia nominal bore

Making connection of G.I(Galvanized Iron ) distribution branch with G.I. (Galvanized Iron ) main 25mm (twenty five millimetre) to 40 mm ( forty millimetre) nominal bore by providing and fixing tee complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Fixing water meter and stop cock in G.I.(Galvanized Iron ) pipe line including cutting and threading the pipe and making long screws etc. complete ( cost of water meter and stop stop cock to be paid seprately). 200 mm (two hundred millimeter) nominal bore complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing gun metal gate valve with C.I. ( Cast iron)wheel of approved quality (screwed end) make of Leader, Zoloto, Kilbum, CIM, Valves Sant complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

25mm (twenty five millimetre) nominal bore

32 mm(thirty two millimeter) nominal bore

Providing and fixing 15mm (fifteen millimetre) nominal bore size ball valve (brass) of approved quality, High or low pressure, with plastic floats complete of Zindal /Tata make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing uplasticised PVC (Polyvinyl chloride) connection pipe with brass unions 30cm ( thirty centimetre ) length 15mm (fifteen millimetre) nominal bore Cera/Jaquar/ Finolex / hindware Make complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Government.

Constructing masonry Chamber 30x30x50 cm (thirty into thirty into fifty centimeter) inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I. (cast iron) surface box 100x100 x75 mm (one hundred into one hundred into seventy five millimeter) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand :four graded stone aggregate 20 mm (twenty millimeter) nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate 40mm (forty milllimeter) nominal size ) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm (twenty millimeter) thick, finished With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (seven point five) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing G.I.(galvanised iron) Union in G.I. (galvanised iron)pipe including cutting and threading the pipe and making long screws etc. complete (New work) :complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

15 mm(fifteen millimeter) diameter nominal bore

20 mm(twenty millimeter) diameter nominal bore

32 mm(thirty two millimeter) diameter nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701(indian standard Twelve thousand seven hundred one) marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) dia C.P.(chrome plated) brass bib cock of approved quality complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) dia C.P.(chrome plated) long nose brass bib cock of approved quality conforming to IS (indian standard)standards and weighing not less than 810 gms (eight hundred ten grams)complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing PTMT pillar cock of approved quality and colour.15 mm(fifteen millimeter) nominal bore, 107 mm(one hundred seven millimeter) long foam flow, weighing not less than 110 gms(one hundred ten grams) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing PTMT soap Dish Holder having length of 138mm,( one hundred thirty eight millimetre ) breadth 102mm ( one hundred two millimetre ) height of 75mm ( seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 gms. ( one hundred six gram) of Jal, Jaquar Parryware, Hindware Make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 (forty millimeter) mm nominal size) all-round S.W. (stoenware) pipes 150 mm (one hundred fifty millimeter) diameter complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. (reinforcement cement concrete) top slab with 1:1.5:3 mix (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimeter) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand : eight graded stone aggregate 40 mm (forty millimeter)(one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimeter) nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80cm and 45cm (ninty into eighty into forty five centimeter) deep including C.I. (cast iron) cover with frame (medium duty) 500 mm (five hundred millimeter) internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilogram) (weight of cover 58 kg (fifty eight kilogram) and weight of frame 58 kg(fifty eight kilogram)) : With Sewer bricks conforming to IS : 4885 (Indian standred :four thousand eight hundred eight five) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimeter) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand : eight graded stone aggregate 40 mm (forty millimeter)(one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimeter) nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 120x90cm and 90cm (one hundred twenty into ninty into ninty centimeter) deep including C.I. ( Cast Iron) cover with frame (medium duty) 500 (five hundred millimeter) mm internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilogram) (weight of cover 58 kg (fifty eight kilogram) and weight of frame 58 kg(fifty eight kilogram)) : With Sewer bricks conforming to IS : 4885(Indian Standard : four thousand eight hundred eighty five) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Single socketed pipes 75mm (Seventy five millimetre) diameter of Supreme/ Fenolax/D-plast/ Vectus make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 (indian standard : thirteen thousand five hundred ninty two ))Type A, complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing in position pre-cast R.C.C.(reinforced cement conceret) manhole cover and frame of required shape and approved quality Circular shape 450(four hundred fifty) mm internal diameter complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 75mm(Seventy five millimeter) PVC (Polyvinyl chloride) Cowl complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202, and 1204(seven hundred two, seven hundred four, one thousand two hundred two and one thousand two hundred four ). Random rubble masonry in cement mortar 1:6 (one cement : six sand ) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm (one hundred millimeter) diameter PVC pipe extending through the full with of the structures with slop of 1(v):20(H) (One hrizontal : twenty vertical) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 (six hundred fourteen,seven hundred nine ,one thousand two hundred four point three point seven). complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Back filling, in the R/wall (retaining wall) and b/wall (Brest wall)spreading & leveling stone boulders of size range 5 cm to 20 cm (five centimeter to twenty centimeter) in the required thickness, for all leads & lifts, all complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Subham Mahajan