REPAIRS TO FLOORING, JOINERY, PLUMBING, SANITARY AND INTERNAL ELECTRIFICATION IN MD AND OTM ACCN AT KASAULI UNDER GE KASAULI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Coloured Glazed ceramic tiles in vertical surface350x 250x 7mm to 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:4 for laying glazed tiles in floors etc.complete all as specified and directed.

All as per item no 3 above but as in skirting incl 10 mm thick rendering in CM 1:3 complete all as specified and directed.

Vitrified ceramic coloured tiles (of approved shade) of size n.exc. 600x 600 mm x10 mm thick in floor, set & jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over 20 mm thick cement screed bed or bedding layer of mortar for lying floor finishes in cement sand mortar (1:4) complete all as specified and directed.

Granite (of any type) work of thickness 20mm in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.(1:4) over 20 mm thick screed bed or bedding layer in CM 1:6 for laying marble incl moulding complete all as specified and directed.

Rounding to edges of stone slab to ne edge, such as in steps and other similar situations all as directed.

Coloured Prepolished chequered cement conc tiles (30cmx30cmx25mm thick) in white cement and pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Demolition of Cement concrete of any description and in any position not otherwise specifically provided for in landing and shelves etc complete all as specified and directed.

PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring complete all as specified and directed.

PCC 40 mm thick 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring making even and smppth without using extra cement complete all as specified and directed.

75 mm thick Plain Cement Concrete (1:3:6) type C-2 using 40 mm graded stone aggregate laid in panels in plinth protection, even & fair surfaces without using extra cement complete all as specified and directed.

Demolition of Reinforcement Cement concrete of any description and in any position not otherwise specifically provided for in landing and shelves etc complete all as specified and directed.

Providing Reinforced cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, Beams, cantilevers, bressummers, shelves complete all as specified and directed. Note : (Reinforce bar paid and measured separately)

Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Rendering 15mm thick in cement plaster 1:4 on Brick work incl finishing surface fair and even without using extra cement complete all as specified and directed.

Rendering 15 mm thick in cement plaster 1:6 on stone work incl finishing surface fair and even without using extra cement complete all as specified and directed.

Rendering 20mm thick in cement plaster 1:4 on fair faces of stone masonry surfaces , finished fair and even smooth without using extra cement complete all as specified and directed.

Preparation of plastered or unplastered new surfaces of walls of and applying two coat of cement base paint over a coat of cement priming coat of any approved tint complete all as specified and directed.

Preparation of new surface applying two coats of oil bound distemper on wall over a coat of 2mm th wall care putty over coat of Priming plastered and other surfaces with alkaliresistant priming paint complete all as specified and directed.

Taking down chowkats or frames without taking down shutters from the frame exc. 1.5 sq. m but n.exc.4 sqm each complete all as specified and directed.

Taking down shutter of any description, exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified and directed.

Taking down chowkats or frames without taking down shutters from the frame n exc. 1.5 sq. m each complete all as specified and directed.

Taking down shutter of any description n. exc 1.0 sq.m each complete all as specified and directed.

Taking down and refixing in same location after making nessary repair and make the shutter fit for use, shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

35 mm thick, 2nd class hardwood , Plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

35mm thick, 2nd class hardwood , factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed.

30 mm thick , 2nd class hardwood, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (b) complete all as specified and directed .

Factory made solid PVC frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, suppling and fixing in opening as per specificaiton and drawing and directed.

Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawingsupplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long, fixed in repair complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 200 mm long fixed in repair complete all as specified and directed.

250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extrudedsections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed in repair complete all as specified and directed.

100 mm Aluminium handles, cast type, anodised, fixed in repair complete all as specified and directed.

75 mm Aluminium handles, cast type, anodised, fixed in repair complete all as specified and directed.

300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified in IS No 452-1973 and directed .

Sheet glass 4.0mm thick, ordinary quality and glazing with oil putty/wooden beads in square n exc 0.5 sq m in each pane complete all as specified and directed .

4 mm thick frosted on one side sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane complete all as specified and directed.

Galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 6 sq.cm and not exc 13 sq.cm complete all as specified and directed.

Plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hardwood clean sawn in sectional area exc 3 sqcm and n exc 6 sq.cm complete all as specified and directed .

Preparation of new wood surfaces of any description, not otherwise described, over 10cm in width or girth, & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

25 mm dia fancy curtain rods, mild steel wall thickness , powder coated with fixing metal ornamental holder and side finals(in pair for each door and window)as approved, fixing with PVC wall plugs bracket and brass screws fixed in repair complete all as specified and directed.

Precast cement concrete type B1 1:2:4(20mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. , with plain fair faces, including hamfers, weatherings, throating etc. and setting in mortar 1:4 complete with joints to match complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, for rough finished surface of concrete complete all as specified and directed.

Mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed .

110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

75 mm bore PVC (SWR) pipes single socketed in any length by using necessary clamps fixed trenches complete all as specified and directed.

75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Cutting holes into or through walls built in stone walls built in cement mortar or cement lime mortar and walls of cement concrete , superficial area n.exc 150 sqcm complete all as specified and directed.

15 mm bore chromium plated bib tap of cast copper alloy,fancy type, screwed down, screwed for iron pipe or for brass ferrule, fixed in repair complete all as specified and directed.

Brass CP wall mixer 15mm dia for mixing hot and cold water screwed down for iron pipe, fixed in repair complete all as specified and directed.

15 mm bore chromium plated stop valve/Angle valve cast copper alloy screwed down, high pressure,fancy type, screwed both ends for iron pipe or for unions, fixed in repair complete all as specified and directed.

Pillar cock, CP 15mm bore cast copper alloy with chromium plated screwed both ends,fancy type, screwed down hidh pressure without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe, fixed in repair complete all as specified and directed.

CP grating of 100 mm da including jointing with solvent cement complete all as specified and directed.

15 mm size PVC connections with PTMT nuts of length 450mm, fixed in repair complete all as specified and directed.

Aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed in repair complete all as specified and directed.

Disconnecting existing tanks of capacity exc. 250 & n. exc. 500 litre, and removing to store complete all as specified and directed.

Disconnecting existing tanks of capacity exc. 500 & n. exc. 1000 litre, and removing to store complete all as specified and directed.

Rotational moulded polyethylene water storage tanks 500 Ltr capacity three layered (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified & directed.

Rotational moulded polyethylene water storage tanks 1000 Ltr capacity three layered (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified & directed.

15 mm bore ball brass float valves high pressure with polythene float and flynut complete screwed or iron etc, fixed in repair complete all as specified and directed.

20 mm bore ball brass float valves high pressure with polythene float and flynut complete screwed or iron etc complete all as specified and directed.

Taking up or down steel water tubing and connections of 15 mm bore fixed in any position complete all as specified and directed.

Taking up or down steel water tubing and connections of 20 mm bore fixed in any position complete all as specified and directed.

15 mm bore GI tubing Medium grade with all fitting and fixed complete to walls and ceilings or laid in floors, fixed in repair complete all as specified and directed.

20 mm bore GI tubing Medium grade with all fitting and fixed complete to walls and ceilings or laid in floors, fixed in repair complete all as specified and directed.

Refixing 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Soap dish, any type, fixed to plugs with chromium plated brass screws, fixed in repair complete all as specified and directed.

Sheet glass self asemblyconsisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket and guard rail, fixed in repair complete all as specified and directed.

600mmx450mm bevelled edge mirror of selcted qulaity glass, mounted on 6mm thick AC building board or commerical ply wood and fixed to wooden plugs with chromium plated brass screw and cup washers, fixed in repair complete all as specified and directed.

Vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand and incl 32mm bore CP coupling long shank , waste pipe & fitting fixed in repair complete all as specified and directed.

Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for sink and WHB fixed in repair complete all as specified and directed.

10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, fixed in repair complete all as specified and directed.

75 mm bore PVC (SWR) floor trap , plain with grating including jointing with solvent cement etc complete all as specified and directed.

75 mm bore PVC (SWR) vent cowl complete all as specified and directed.

Grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gm) complete all as specified and directed.

Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed in repair complete all as specified and directed.

Stainless steel plate rack of size 24"X36"X10" made of 1 mm thick salem stainless steel sheet grade SS-304 with shelves, hooks and railing to keep plates vertically and horizontally, including necessary fixing arrangement, fixed in repair complete all as specified and directed.

18-19 mm thick prelaminated particle board, interior grade, pre laminated one side with decorative choice lamination and other of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails in cup board, kitchen cabinets shutters etc, fixed in repair including taking down existing shutters of any size and description complete all as specified and directed .

Hasp and staple 100mm size, safety type aluminum anodized including bolt to hinge plate,catcher fixed in repair complete all as specified and directed.

40mm size ( & as per site requirement) continuous (Piano) hinges, mild steel fixed in repair complete all as specified and directed.

Vitreous china squatting pan “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe)with & including P or S trap and flushing pipe complete, set with cement concrete, fixed in repair complete all as specified and directed.

Vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, (excluding fixing bolts, flushing cistern and flush pipe), fixed in repair complete all as specified and directed.

Vitreous china, wash down water closet pan, Pedestal pattern special colour with ‘P’ or ‘S’ trap, including flushing cistern with lid, fitting and seat cover, complete set fixed in repair complete all as specified and directed. MAKE : HINDWARE Constellation Cat Part No 20024 (S-10/P-19) cist -21038 or equivalent in PARRYWARE/CERA

Taking down existing aluminium door/ window shutters with frames, with glazed or other fillings including fittings and removing from site complete all as specified and directed.

Powder coated (thickness or powder coating of any clour coating not less than 50 micron) aluminum frame for doors, windows, ventilators, partition etc. with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (Glazing, rubber beading and aluminum hardware shall be measured and paid separately)

Powder coated (thickness or powder coating of any clour coating not less than 50 micron) anodised aluminum door shutters, luminium section with and including necessary joining cleats, glazing clips, rubber neiprene paking, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed.

Supply and fixing powder coated (thickness or powder coating of any clour coating not less than 50 micron) anodised aluminum window/ventilators shutters side hung type without sash, aluminium sections with and including necessary joining cleats, glazing clips, rubber neiprene paking, anodised aluminium fittings such as peg stays 150 mm long (1 NO) hinges type B-21 100mm long (2 No) suitable handle (1 No), etc, complete all as specified and directed.

5.5mm thick tinted sheet glass fixed to aluminum frame work using anodized aluminum bead, rubber beading & packing, in panels exc 0.5 square metre in each pane complete all as specified and directed.

9 mm thick pre laminated particle board (ISI Marked), interior grade, pre laminated both side with decorative choice lamination as in aluminium door complete all as specified and directed .

Cutting chases, pining in, making good to facings in brick or stone wall where required and pointing in cement mortar 1:3, for concealed water tubing etc and making good, cutting not exc 10cm girth complete all as specified and directed.

Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe fixed in repair complete all as specified and directed.

Vitreous China half stall urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinalagainst wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe fixed in repair complete all as specified and directed.

Toilet paper holder, CP incl chromium plated brass screws and wooden plastic cleats complete all as specified and directed.

Door closer hydraulically regulated aluminum (dia cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg, fixed in repair complete all as specified and directed.

Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of walls and applying two coat of oil bond distemper of any approved tint after complete removal of existing surface complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of ceiling and applying two coat of cement base paint of any approved tint after complete removal of existing surface complete all as specified and directed.

Complete removal of existing surface applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler with two or more coats complete all as specified and directed.

3mm thick wall care putty on wall complete all as specified and directed.

3mm thick wall care putty on ceiling complete all as specified and directed.

CP Health Faucet flexible pipe of suitable length fixed to 15mm bore pipe, fixed in repair complete all as specified and directed.

Brass jet spray flexible pipe of suitable length fixed to 15mm bore pipe, fixed in repair complete all as specified and directed.

Taking down 12 mm thick thoughened or tint glass fixed to aluminium frame work with standard anodized aluminium beading rubber packing aluminium screws etc in panels exc 0.5 Sqm in each pane, fixed in repair complete all as specified and directed.

12 mm thick thoughened or tint glass fixed to aluminium frame work with standard anodized aluminium beading rubber packing aluminium screws etc in panels exc 0.5 Sqm in each pane, fixed in repair complete all as specified and directed.

Taking down and Refixing by making good 12mm thick thoughened/tint glass fixed to aluminium frame work with standard anodized aluminium beading rubber packing aluminium screws etc in panels exc 0.5 Sqm in each pane, fixed in repair complete all as specified and directed.

Taking down carefully aluminium/ copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as switches, sockets, lamp holder, utility light fitting, fan regulator, ceiling rose etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and directed.

Point wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing sunken boxes for mounting of switch, socket etc incl taking down unsv if reqd complete all as specified and directed for the following :-

One Light/Fan/Bell point controlled by one, one way switch 6 Amp

One switch socket outlet 3 pin, 5 Amp on the independed board

One switch socket outlet 3 pin, 5 Amp on same board

All as per item No 113 but point wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 Sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly for one 16 Amps socket (Power) point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, socket etc incl taking down unsv if reqd complete all as specified and directed.

Sub main wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing caping required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces etc, fixed in replacement incl taking down unsv complete all as specified and directed.

Switch piano flush button single pole one way, 6 Amps, 240 Volt incl taking down unsv , fixed in replacement complete all as specified and directed.

Bell push piano flush type 6 amps , 240V, fixed in replacement incl taking down unsv complete all as specified and directed.

Buzzer ding dong, AC 230 volts Single Phase, fixed in replacement incl taking down unsv complete all as specified and directed.

Socket outlet 2-in-1 5 pin, 6 Amps flush type, fixed in replacement complete all as specified and as directed.

Switch piano flush button single pole one way, 16 Amps, 230/240 V, fixed in replacement incl taking down unsv complete all as specified and directed.

Socket outlet 2-in-1 5 pin, 6 & 16 Amps flush type, fixed in replacement incl taking down unsv complete all as specified and directed.

PVC Plug Top 5 pin, 6 & 16 Amps flush type, fixed in replacement incl taking down unsv complete all as specified and directed.

Ceiling rose surface, backelite, three terminal, 240 volts, fixed in replacement incl taking down unsv complete all as specified and directed.

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, fixed in replacement incl taking down unsv complete all as specified and directed.

Wall mounted LED batten box type pre coated CRCA body suitable for retrofit LED tube rod 18 Watt including LED self ballasted LED retrofit tube lamp 18 Watt with thermoplastic body min 1800 system lumens and builtin surge protection of 2.5 KV fixed in repair incl taking down unsv complete all as specified and directed.

LED self ballasted LED retrofit tube lamp 18 Watt with thermoplastic body min 1800 system lumens and builtin surge protection of 2.5 KV incl taking down unsv complete all as specified and directed.

Wall mounted mirror light LED fitting self ballasted LED batten extruded thermoplastic body with PC diffuser in unique square shaped 10 watt 2 Feet long CCT 6500K fixed in repair incl dismantling taking down unsv fitting any type complete all as specified and directed.

Surface mounted LED bulk head 10 watt luminaire with ABS body & polycarbonate diffuser IP 65 including connecting to ceiling rose with 0.5 sqmm two core copper flexible conductor cable, fixed in repair incl lamp incl taking down unsv complete all as per specified and directed.

Self ballasted LED Retrofit Bulb 5 Star Bulbs 9 Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and directed.

Self ballasted LED Retrofit Bulb 5 Star Bulbs 12 Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and directed.

Self ballasted LED Retrofit Bulb 3 Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, E-14 cap, (Thread type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and as directed.

Self ballasted LED Retrofit Bulb 3 Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, E-27 cap, (Thread type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and directed.

LED Slim panel size 2'x 2' ,40 Watt recess/ surface mounting edge lit LED slim panel having white powder coated extruded aluminium body with high quality LGP and PMMA diffuser , separate HPF driver suitable for Armstrong and grid ceiling separate accessories for recess /surface mounting PCGLP 2X 2, CCT 4000K, fixed in repair incl dismantling taking out unsv one of any make/ size complete all as specified and directed.

Recess mounting ceiling fitting 1'X4' LED 36 Watt light Edgelit slim panel having white powder coated extruded aluminium body with high quality LPG and PMMA diffuser. Separate HPF driver. Suitable for Armstrong and Grid ceiling, PF min 0.95 complete incl dismantling taking out unsv one of any make or size complete all as specified and directed (As per existing Sample).

Recess mounting ceiling fitting 1'X1' LED 18 Watt light Edgelit slim panel having white powder coated extruded aluminium body with high quality LPG and PMMA diffuser. Separate HPF driver. Suitable for Armstrong and Grid ceiling, PF min 0.95 complete incl dismantling taking out unsv one of any make or size complete all as specified and directed (As per existing sample).

Building security LED light 25 Watt energy saving LED ASTRA NEO street light made up of pressure dia cast housing with toughened glass and high power LEDs with option of secondary optic with IP66 protection, efficacy : 110LM/W one GI medium grade 25mm dia bracket of total lenghth 50 cm incl 2 Nos MS Clamp and fastners after dismantling taking down unsv one all as specified and directed.

MCB DB TPN 4 way double door, IP 43, CRCA sheet powder coated vertical type factory made suitable for incorporating MCB as out going and MCCB as incoming including connecting incoming and outgoing cables & blaking plate as required incl taking down existing unsv DB of any size and making good distrubed surface to match with existing complete all as specified and directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

MCB DB SPN 4 way double door, IP 43, CRCA sheet powder coated, factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables & blaking plate as required including taking out existing unserviceable DB of any size and making good disturbed surface to match with existing incl taking down unsv complete all as specified and directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

MCB DB SPN 8 way double door, IP 43, CRCA sheet powder coated factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables & blaking plate as required incl taking out existing unsv DB of any size and making good disturbed surface to match with existing incl taking down unsv complete all as specified and directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

MCB TPN 63 Amps, 10 KA 415 Volt, 50 Hz, IS/IEC 60898-1, 'C' curve including taking down unserviceable complete all as specified and directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

MCB SPN 32 Amp to 40 Amp, 10 KA, 240 volts, IS/IEC 60898-1, 'C' curve including taking down unserviceable complete all as specified and directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

MCB SP 6 Amp to 32 Amp 10 KA, 240 volts, IS/IEC 60898-1, 'C' curve including taking down unserviceable complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble)

Single pole and neutral enclosure with a two pin and earth plug and socket board with IS 13032, IS 8623 complete with one single pole 20 amp MCB complete incl dismantiling taking out unsv complete all as specifed and directed.

Heating Element ISI Marked round/ tringular base, push type or thread type including rubber washer for 1.5/2.0 KW suitable for geysers 25 Ltrs to 50 Ltrs capacity (as per existing sample) including taking down unserviceable complete all as specified and directed.

Thermostat ISI Marked suitable for geysers 25 Ltrs to 50 Ltrs capacity (as per existing sample) including taking down unserviceable complete all as specified and directed.

Cromium plated connections 45 Cm long for Hot or Cold water of 15mm size with cromium nuts and washsers, fixed in repairs complete all as specified and directed.

PVC gang box suitable for 6 Amp Socket and 6 Amp switch, fixed in replacement complete all as specified and directed.

PVC gang box suitable for 16 Amp Socket and 16 Amp switch, fixed in replacement complete all as specified and directed.

Supply only electric insulation tape heavy duty complete all as per specifed and directed

1100 volts grade heavy duty cable with PVC insulated aluminium, conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sq. mm x 2 Core nominal cross section in service connections complete all as per specifed and directed.

Modular switch 1 way 6 Amp , 1 module including taking down unsv complete all as specifeid and directed.

Modular switch 1 way 16 Amp , 1 module including taking down unsv complete all as specifeid and directed.

Modular socket 6 Amp -2/3 pin combined 2 module including taking down unsv complete all as specifeid and directed.

Modular socket 6 Amp/16Amp -2/3 pin combined 2 module including taking down unsv complete all as specifeid and directed.

LED warm white 18Watt B22 including and taking down unserviceable complete all as specified and directed.

Vitreous china counter wash basin , white, flat back, 560 mm X 450 mm including cutting for and pinning for fitting in granite top and incl 32 mm bore CP coupling long shank , bottle trap, waste pipe and fitting, fixed in repair complete all as specified and directed.

Pedestal type vitreous china wash basin , white, flat back, 500 mm X 400 mm X 800 mm including cutting for and pinning in ends of brackets or erecting stand and incl 32 mm bore CP coupling long shank ,waste pipe and fitting, fixed in repair complete all as specified and directed.

Vitreous china , wall hung wash down water closet pan, white pedestal pattern WC with trap , (excluding fixing bolts, flushing cistern and flush pipe), fixed in repair complete all as specified and directed.

Terminal box to cover up open connection for protection cables complete all as specified and directed.

Varindera And Varindera Construction

Sagar Builders