Loading…
Loading…
Tender Value
₹2.7 Cr
EMD Value
₹5.5 L
Closing Date
11 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SR.DEN III
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Any Civil work other than track work.
7 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer may please note that offers received without requisite/mandatory documents as mentioned above, will be considered as invalid tender and for which contractor shall have no claim on Railway.
The tenderer shall visit the site of work and acquaint himself/themselves with the conditions of work viz. approach roads and accessibility, availability of materials, electric power, water for work and drinking purposes, site for labour camps, stores, godowns, extent of lead/lift in work, availability of skilled and unskilled labour etc. that may be encountered in the course of execution of work. In short, he/they should familiarize himself/themselves fully with the all the conditions of the work site & all the financial implications due to the above conditions is deemed to be understood and taken care of while bidding the offer.
Augmentation of infrastructure facilities through renovation and allied works to improve maintenance facilities at various outpits in the section of SSE/W/NDLS & SSE/W/ANVT under ADEN/NDLS.
NIT-21-2026-27-W-III
NIT-21-2026-27-W-III
Open
Works - General
6 Months
Delhi, Delhi
₹0
₹5.5 L
11 Jun 2026
19 May 2026
28 May 2026
71 items across 2 schedules · ₹3,07,32,941.15 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 1150 | 205.45 | 2,36,267.5 |
| 2 | All kinds of soil. | cum | 800 | 286.85 | 2,29,480 |
| 3 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 12.5mm nominal size derived from natural sources) | Sqm | 300 | 370.85 | 1,11,255 |
| 4 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. | Sqm | 300 | 113.85 | 34,155 |
| 5 | Concrete of M10 grade with minimum cement content of 220 kg /cum. (Note: The permissible utilization of Recycled Concrete Aggregate (RCA) as coarse aggregate and fine aggregate is 100% each). | cum | 200 | 7,102.95 | 14,20,590 |
| 6 | Concrete of M15 grade with minimum cement content of 240 kg /cum. (Note: The permissible utilization of Recycled Concrete Aggregate (RCA) as coarse aggregate and fine aggregate is 25% each). | cum | 100 | 7,998.95 | 7,99,895 |
| 7 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 550 | 307.95 | 1,69,372.5 |
| 8 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 600 | 766.55 | 4,59,930 |
| 9 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 400 | 608.35 | 2,43,340 |
| 10 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 400 | 804.25 | 3,21,700 |
| 11 | Stairs, (excluding landings) except spiral- staircases | Sqm | 200 | 657.75 | 1,31,550 |
| 12 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 8000 | 89.65 | 7,17,200 |
| 13 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 8500 | 89.65 | 7,62,025 |
| 14 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 240 | 8,683.8 | 20,84,112 |
| 15 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 400 | 10,306.2 | 41,22,480 |
| 16 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 150 | 6,882 | 10,32,300 |
| 17 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 300 | 8,512.1 | 25,53,630 |
| 18 | Second class teak wood | cum | 6 | 1,31,576.95 | 7,89,461.7 |
| 19 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 80 | 3,086.1 | 2,46,888 |
| 20 | 35 mm thick shutters | Sqm | 100 | 2,682.05 | 2,68,205 |
| 21 | 250x10 mm | Each | 50 | 374.35 | 18,717.5 |
| 22 | 200x10 mm | Each | 40 | 300.55 | 12,022 |
| 23 | 300x16x5 mm | Each | 30 | 273.2 | 8,196 |
| 24 | 250x16x5 mm | Each | 30 | 259.8 | 7,794 |
| 25 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. | Each | 50 | 185.95 | 9,297.5 |
| 26 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 20000 | 142.3 | 28,46,000 |
| 27 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 650 | 612.25 | 3,97,962.5 |
| 28 | Stainless steel (grade 304) wire gauge of 0.5 mm dia wire and 1.4 mm aperture on both sides | Sqm | 200 | 971.55 | 1,94,310 |
| 29 | 4.0 mm thick glass panes (weight not less than 10 kg/sqm) | Sqm | 200 | 940.3 | 1,88,060 |
| 30 | 25 mm thick | Sqm | 400 | 1,706.6 | 6,82,640 |
| 31 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | Sqm | 100 | 2,038.55 | 2,03,855 |
| 32 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in- Charge: | Sqm | 100 | 3,282.5 | 3,28,250 |
| 33 | With machine moulded common burnt clay F.P.S. (non modular) brick tiles of class designation 12.5, conforming to IS 2690 | Sqm | 250 | 905.8 | 2,26,450 |
| 34 | In 75x75 mm deep chase | Metre | 200 | 260.2 | 52,040 |
| 35 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. | Each | 30 | 266.6 | 7,998 |
| 36 | 110 mm diameter | Metre | 200 | 319.75 | 63,950 |
| 37 | 110 mm | Each | 20 | 119.95 | 2,399 |
| 38 | 110x110x110 mm | Each | 20 | 205.45 | 4,109 |
| 39 | 110 mm bend | Each | 20 | 132 | 2,640 |
| 40 | 110 mm | Each | 150 | 309.5 | 46,425 |
| 41 | 1:4 (1 cement: 4 fine sand) | Sqm | 1700 | 294.85 | 5,01,245 |
| 42 | 1:4 (1 cement: 4 fine sand) | Sqm | 1600 | 339.7 | 5,43,520 |
| 43 | 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. | Sqm | 1000 | 334.2 | 3,34,200 |
| 44 | New work (two or more coats) over and including water thinnable priming coat with cement primer | Sqm | 2800 | 162.55 | 4,55,140 |
| 45 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | Sqm | 2800 | 166.85 | 4,67,180 |
| 46 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 500 | 144.9 | 72,450 |
| 47 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | Sqm | 1000 | 191.4 | 1,91,400 |
| 48 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 100 | 2,007.1 | 2,00,710 |
| 49 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 80 | 2,928.1 | 2,34,248 |
| 50 | Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer | cum | 100 | 10,006.65 | 10,00,665 |
| 51 | Overhead informatory road signage | Sqm | 25 | 5,609.55 | 1,40,238.75 |
| 52 | 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. | Sqm | 220 | 1,011.2 | 2,22,464 |
| 53 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 15 | 5,781.35 | 86,720.25 |
| 54 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 15 | 5,540.55 | 83,108.25 |
| 55 | 32 mm dia | Each | 20 | 90.95 | 1,819 |
| 56 | 20 mm nominal dia Pipes | Metre | 200 | 513.75 | 1,02,750 |
| 57 | 15 mm nominal bore | Each | 50 | 85.2 | 4,260 |
| 58 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 20000 | 9.7 | 1,94,000 |
| 59 | 15 mm nominal bore | Each | 40 | 434.2 | 17,368 |
| 60 | 15 mm nominal bore | Each | 40 | 715.05 | 28,602 |
| 61 | 250 mm dia. R.C.C. pipe | Metre | 1500 | 811.15 | 12,16,725 |
| 62 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 40 | 24,405.9 | 9,76,236 |
| 63 | Circular shape 560 mm internal dia | Each | 40 | 1,882.2 | 75,288 |
| 64 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 350 | 466.3 | 1,63,205 |
| 65 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 300 | 564.8 | 1,69,440 |
| 66 | Pre-laminated particle board with decorative lamination on both sides | Sqm | 100 | 951.05 | 95,105 |
| 67 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). | Kg | 400 | 560.85 | 2,24,340 |
| 68 | P r o v i d i n g and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in- Charge. | Sqm | 500 | 474.15 | 2,37,075 |
| Schedule total | ₹3,00,76,454.45 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
StandardTenderDocument2022R5.pdf Standard Tender Document 2022
ATTACHMENT
GCC-2022withCSupto10.pdf
ATTACHMENT
GCC-2022withCSupto11.pdf
ATTACHMENT
StandardTenderDocument2022R5.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .