Routine Maintenance to staff quarters under jurisdiction of CSD- .Type I,II,III,IV and V Qrts at Sarojini Nagar, R K Puram Sec 6,3,12,8,etc, Moti bagh, Sewa Nagar, Kidwai Nagar west and Pushp Vihar etc. New Delhi (SH-Day to day civil maintenance of q

Amount

Subhead-I: Day-to-day operation of civil service centre

Providing carpentry/wood work repair services for attending day to day complaints of various residential and non residential buildings. The work shall mainly include repairs to doors, windows, ventilators, frames, shutters replacement of glass panes and other miscellaneous works related to carpentry work. The nature of works allotted shall be such that can be handled by one carpenter (Ist class). T & P shall be arranged by the contractor. Materials consumed in the work shall be provided by BSNL free of cost.

Providing plumbing repair services for attending day to day complaints of various residential and non residential buildings. The work shall mainly include repairs to broken G.I.pipe,repairs/replacement of stop cock, bib cock, pillar cock, ball cock and other miscellaneous works related to plumbing work. The nature of work allotted shall be such that can be handled by one plumber/ fitter (1st class). T&P shall be arranged by the contractor. Materials consumed in the work shall be provided by BSNL free of cost.

Providing masonry repair services for attending day to day complaints of various residential and non residential buildings. The work shall mainly include repair to plaster work and other other miscellaneous masonry works related to plumbing work. The nature of work allotted shall be such that can be handled by one mason (1st class). T&P shall be arranged by the contractor. Materials consumed in the work shall be provided by BSNL free of cost.

Extra for making arrangements of a helper/beldar in addition to skilled workers for assisting in plumbing/masonry/carpentry/sewer maintenance works. This items shall be paid for on a per day basis, in case the complaints to be attended in items 2,3,4 & 5 are such that it cannot be attended to by single skilled worker. the decision of the Engineer-in-Charge regarding whether an extra helper is required for maintenance on a particular day will final and binding on the contractor.

Providing sewer maintenance services for attending day to day complaints of various residential and non residential buildings. The work shall mainly include cleaning and opening of chocked main hole, W.C.pots, surface drains, sewer line and other such miscellaneous works. The nature of work allotted shall be such that can be handled by one sewer man (1st class). T&P shall be arranged by the contractor. Materials consumed in the work shall be provided by BSNL free of cost.

Providing welding services (one welder with an assistant), along with all T&P such as welding machine, generator, welding rods etc. for eight hours. As and when sufficient welding works for one day have accumulated, the contractor shall be directed to provide this service. The material if any required (other than T&P and welding rods) shall be provided by BSNL. The contractor shall have to make his own arrangements for movement of T&P among the various buildings or in the same building/ compound.

Providing assistance at Enquiry office for attending day to day complaints of various residential and non residential buildings. The work shall mainly attending telephone call s , receiving requisition attending of allotty s and helping of keeping of records work and other other miscellaneous works related to manage of enquiry labour . The nature of work allotted shall be such that can be handled by skilled (knowledge full) person and he have good manner

Subhead-II: Material to be supplied to BSNL

Supplying the following items at civil service centre (civil enquiry).

Portland Cement (OPC-43 Grade) in 50 Kg bags

Coarse sand (Zone III) - sample to be got approved first by Engineer-in-charge

White Cement (one kg pack)

Fine sand (zone IV)

Mild steel nails of various sizes

Putty for wood work (In 10Kg packs unless otherwise directed by Engineer-in-charge)

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

15mm nominal bore and 45 cm length PVC connection pipe with PTMT nuts.(Prayag make)

PTMT - Waste Coupling 31/32 mm (Prayag make or equivalent)

PTMT - Waste Coupling 38/40 mm (Prayag make or equivalent)

PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium Rod & H.D. Ball

Vitreous china orrisa type W.C. pan of size 580 mm (hind ware,pary ware and equalent)

Vitreous china pedestal type water closet (hind ware,pary ware and equalent)

Vitreous china flat back wash basin 550x400 mm (Cera)

Ply wood 5 ply with commercial ply on both faces 6 mm thick

Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm

Aluminium Sheet (0.8 mm thick)

Stainless steel kitchen sink - with drain board 510x1040 mm bowl depth 250 mm

G.I. pipes 15 mm dia

C.P. Brass long body bibcock 15 mm

C.P. Brass angle valve 15 mm

15 mm PTMT bib cock

15 mm dia PTMT stop cock (male thread)

PTMT pillar cock

PTMT grating 100 mm dia

PTMT Soap Dish/Holder 138x102x75 mm

C.I. bracket for wash basin and sinks

S.C.I. gully or nahani grating 100 mm dia

Oxidised mild steel tower bolt (barrel type) 150x10 mm

Oxidised mild steel handles 125 mm

Oxidised mild steel sliding door bolt 250x16 mm

Rectangular shape 453x357 mm Mirror with Plastic moulded frame

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings

P.V.C. automatic flushing cistern 10 litre capacity

8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C.

Hack-saw blade(Double teethed)

G.I. Hex nipple 15mm (Unik make)

G.I. 50 mm long nipple, 15mm nominal bore (Unik make)

G.I. 75 mm long nipple, 15mm nominal bore (Unik make)

G.I. 100 mm long nipple, 15mm nominal bore. (Unik make)

G.I. Socket 15mm nominal bore (Unik make)

G.I. Elbow - 15 mm nominal bore (Unik make)

GI Tee 15mm nominal bore (Unik Make)

G.I. Union 15 mm nominal bore (Unik make)

Unplasticised PVC waste pipe ( plain/ribbed)-25mm nominal bore

Epoxy putty (M-seal regular or equivalent), 60 grams packets

Soot gola balls (thread) for plumbing work.

PVC cistern ball cock

15 mm GI Tank nipple

MS Plug 15 mm & 20 mm

GI Socket reducer 15x20 mm

CP waste jali 32 mm

CP waste jali 40 mm

15 mm Die set (steel) for GI pipe threading, approved by E.I.C

PVC Tank Cover threaded for 500 ltrs tank, required size, approved E.I.C

European toilet sheet cover ( PVC) i/c fitting etc, reuired size, approved quality by E.I.C

Harpic cleaner 1 litre

Phool jharu

Cotton cloth for cleaning

Soap normal for hand wash

A-4 size paper rim standard size for office uses

C.P.Brass Bib cock with wall flange (Model Jaquar/,Prayag waves NEPTURE SERIES Cat No. -PIS-06 )

C.P.Brass pillar cock (Model Jaquar/,Prayag make Faucets series cat no.PIS-02H)

Health faucet(2-in-one) (1.50 mtr tube ) with hook Cat no.188

Credit towards cost of unserviceable dismantled material:

Brass scrap (including C.P.Brass taps, ball cock rods, brass waste etc.)

Iron / steel scrap (including cast iron, galvanised iron, mild steel etc.)

PVC / Plastic scrap (such as PTMT , PVC pipe pieces, old cistern etc.)

TUSHAR ENTERPRISES