864/WS-52/2021-22

Amount

Repair, replacement and fixing of worm gear reduction system with teeth ratio 70:35 and properly coupled with Motor to give revolution of 10 RPM in clariflocculator tank, complete all as specified and directed.

S&F 3 HP motor, 240 Volts, 0.75 KW with 900 RPM over PCC /iron channel base with all fittings including coupling with proper alignment with gear system including dismantling old/ unsv motor complete all as specified and directed.

S&F 1 HP motor, 240 Volts, 0.75 KW with 900 RPM over PCC /iron channel base with all fittings including coupling with proper alignment with gear system including dismantling old/ unsv motor complete all as specified and directed.

S&F 5 HP motor, 240 Volts, 0.75 KW with 900 RPM over PCC /iron channel base with all fittings including coupling with proper alignment with gear system including dismantling old/ unsv motor complete all as specified and directed.

Supply only chlorine dioxide testing kit for measuring contains of chlorine dioxide solution in water complete all as specified and directed. Make. Prena and Bharti water limited or tecnocommercially equivalent make as approved by GE.

S&F copper conductor cable of size 7/16 sqmm, single core HRFR PVC insulated industrial grade copper conductor (unseathed) flexible cable, 1100 Volts conforming to IS :694 inccluding taking up or down old/ unsv cable complete all as specified and directed.

S&F in repairs mats shock proof rubber cheaqured mats 1mx2mx2.5mm thick, complete all as specified and directed.

S&F DOL starter 7.5/10 HP including taking down old/ unserviceable starter complete all as specified and directed.

Supply and filling of Gear oil for gear system including draining out the old unserviceable oil complete all as specified and dlirected. Make : Castrol, Servo, Valvoline

Supply and fix Nylon Rope with PP twisted rope dia 12mm for anchoring, very strong, high strech rope that absorbs shock loads loads angainst old/ unsv rope complete all as specified and directed.

S&F Chain block made of cast iron of sufficient strength to hold the jetking to main body of pantoon, A high class load chain with a breaking strength of 1000N/mm2 including taking down old/ unsv chain block complete all as specified and directed.

Supply and laying GI water tubing 150 mm bore with screwed socket joints, medium grade galvanised including all fittings, such as sockets, bends, elbows, unions, tees laid in trenches including taking up or down old/unsv tubes complete all as specified and directed. (from New BP Tank to BP tank, from New BP to 11 FSG and oval ground)

Supply and laying GI water tubing 150 mm bore with screwed socket joints, medium grade galvanised including all fittings, such as sockets, bends, elbows, unions, tees laid in trenches including taking up or down old/unsv tubes complete all as specified and directed. Note: Proper connection shall be made from New BP Tank overflow pipe of 12 inch dia by connecting it to 6 inch dia rising of BP tank. Rate for the same shall deemed to be included in the quoted rates. Nothing shall be extra paid on this account.

S&F in repairs Heavy duty sluice valve short body type of cast iron both ends flanged with rubber insertion and drilled of size 8'' (200mm) dia and conform to IS-14846 with pressure rating of PN 1.6 with brass/copper alloy spindle and iron wheel head with nuts, bolts and washers of suitable size complete all as specified and directed.

S&F manually operated oil immersed star delta motor starter, 125 HP, three phase with double contact strip wound overload coil and cable entry box including taking down unserviceable starter complete all as specified and directed.

S&F Heavy Duty cast Iron Non return valve, short body type, flanged ends heavy duty as per IS 5312, PN 1.6 of size 5 inch dia including 6mm thick rubber insertion ring and taking down old unserviceable non return valve complete all as specified and directed.

S&F Vertical position brass/gun metal Non return valve, short body type, flanged ends heavy duty as per IS 5312, PN 1.6 of size 3 inch dia including 6mm thick rubber insertion ring and taking down old unserviceable non return valve complete all as specified and directed.

M&L for Cutting the road /hard standing to a size not exceeding 70 cm in width and not exceeding 90 cm in depth for laying / removal of MS/CI/GI pipe including making good so as to match with existing finishing with PCC (1:4:8) type D2 (using 40mm graded stone aggregate) for 100mm thick on top including fair finishing with black paint complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of pipe line, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soils complete all as specified and directed.

Removing excavated material/ soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

S&F GI flange 150mm dia ISI marked including rubber washer and taking down unserviceable GI flange complete all as specified and directed.

S&F cast iron air release valve with double air outlets and fixing up in MS/CI/GI mains of size 150 mm dia, including MS flange, cutting/welding works required at site including taking out old unserviceable air release valve complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 ltrs capacity triple layered hoisting and fixing in position all as specified in SSR Part I including taking down old unserviceable PVC tank complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 250 ltrs capacity triple layered hoisting and fixing in position all as specified in SSR Part I including taking down old unserviceable PVC tank complete all as specified and directed.

M&L for bends, tapers, tee pieces (single & double branch) any type and angle/ radius and straight connecting pieces but all ends flanged pipe upto 150mm dia including taking down old unserviceable fittings complete all as specified and directed.

M&L for run lead joint for 100 mm dia pipe complete all as specified and directed.

Supply, fabrication, welding and fixing of starter stand, plane rolled section such as joist, beam, circular channel, angle, tee Fe 410W (Gde E-250) quality A in available length including taking down old unserviceable stand complete all as specified and directed.

S&F Heavy duty sluice valve short body type of cast iron both ends flanged with rubber insertion and drilled of size 6" (150mm) dia and IS-14846 with pressure rating of PN 1.6 with brass/copper alloy spindle and iron wheel head with nuts, bolts and washers of suitable size including taking down old unserviceable sluice valve complete all as specified and directed.

Supply and laying GI water tubing 100 mm bore dia with screwed socket joints, medium grade galvanised including all fittings, such as sockets, bends, elbows, unions, tees laid in trenches including taking up or down old/unsv tubes complete all as specified and directed. Note : Proper washout connection shall be made from 1lac water storage tank in atal colony to specified length. Rate for the same shall deemed to be included in the quoted rates. Nothing shall be extra paid on this account.

S&F manually operated oil immersed star delta motor starter, 60 HP, three phase with double contact strip wound overload coil and cable entry box including taking down unserviceable starter complete all as specified and directed.

S&F manually operated oil immersed star delta motor starter, 20 HP, three phase with double contact strip wound overload coil and cable entry box including taking down unserviceable starter complete all as specified and directed.

S&F nut bolts of sizes varying form 8 inch to 3 inch for tightening of sluice valves and flanges complete all as specified and directed.

M/S BILAL CONSTRUCTION AND CO.

M/S KABIR CHOUDHARY

M/S VALLEY ENTERPRISES

M/S FAISAL TRADING CO.