REPAIRS TO FLOORING BRICK WORK JOINERIES SANITARY FITTINGS AT ASC FPD DDGSI WEU UNDER AGE BRII OF GE (NORTH) UDHAMPUR

Amount

Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etccomplete all as specified and as directed by Engineer-in-Charge

Rendering 15mm thick on fair faces of brick/concrete surfaces in cement mortar 1:4, with water proofing compound (WPC shall be measured separately) complete all as specified and as directed. .

Rendering 5 mm thick in cm 1:3 on ceiling finished even & smooth W/O using extra cement complete all as specified and as directed by Engineer-in-Charge.

Cement plaster 15mm thick on fair faces of brick/conc surfaces of walls in cement mortar 1:6 finished fair and even complete all as specified and as directed by Engineer-in-Charge

Rendering 10mm thick on brick or concrete surface as in chaja/facia in cement mortar 1:3 finished even and smooth without using extra cement all as specified.

Brick work with sub class 'B' bricks st or curved or plain with cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge

"-ditto - as per item No 06 but except brick complete all as specified and as directed by Engineer-in-Charge

Demolition of brick work of any description complete all as specified and as directed by Engineer-in-Charge

Supply only integral water proofing compound complete all as specified and as directed by Engineer-in-Charge

Three coat of white wash on new surfaces as on ceiling complete all as specified and as directed by Engineer-in-Charge

Two coat of Oil bound distemper including a coat of primer over 1mm thk wall care putty including preparation of newly plastered surfaces of wall.

Two coat of cement base paint over a coat of cement primer including preparation of newly plastered surfaces of wall complete all as specified and as directed by Engineer-in-Charge

Demolition of concrete in ground floor and paving n.exc 15 cm thickness below or G.Lcomplete all as specified and as directed by Engineer-in-Charge

Providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection even and smooth without using extra cement complete all as specified.

Providing 75 mm thick cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in flooring/subbase finished even & rough without using extra cement complete all as specified.

25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and rough to receive tiles without using extra cement complete all as specified.

Providing 75 mm thick cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregates as in flooring/subbase finished even & smooth without using extra cement complete all as specified.

Providing 40mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate finished even and smooth w/o using extra cement all as specified.

3mm glass dividing strips, 38mm wide complete all as specified and as directed by Engineer-in-Charge

Machine cut kota stone slab flooring 20-25 mm thk over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including laying over 20mm thick Screed in cement mortar 1:4 complete all as specified and directed.

Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar jointed with ditto as per item above & including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Granite (of any type) 18 mm to 20 mm thk work (table rubbed & polished) as in steps, jambs, pillars, window cills, cooking platforms and like ,machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over & incl 20 mm thk screed bed in CM 1:4 all as spd & dir

Marble slab (of any type & any shade) as in shelves, cooking platforms etc, bedded jointed and pointed with white cement sturry including cutting & polishing, 15 mm to 18 mm thickness laid over & incl 20 mm thk Screed bed in CM 1:4 all as spd & dir.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ractangular) area of each tiles exceeding 0.11 Sqm but n.exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface laid over & incl 15 mm thk screed bed in CM 1:4 complete all as specified and directed.

Ditto all as per item above but on skirting over vertical surfaces & including 10 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified.

Light shade Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry & pointed with grout of matching shade, complete, all as specified.

Ditto all as per item above but as in skirting over vertical surfaces & including 10 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified.

Glazed ceramic coloured tiles 300X200X7mm thk as in skirting over vertical surfaces & including 10 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified.

450mm x 300mm x 7 mm thick first quality coloured glazed ceramic tiles as in skirting/dado including 10 mm thick cement mortar 1:4 screed, set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises, complete all as specified.

60mm thick machine pressed interlocking paver blocks of any shape and size with M-35 design Mix concrete of any approved colour using grey cement and pigment conforming to IS 15658-2006.

Sand cushoning bed (filling under floors) incl spreading levelling watering if required complete all as spd & dir.

Providing Chequred cement concrete tiles 25cm x 25cm x22 mm thick tiles set , jointed and pointed in neat cement slurry in floors with grey cement ant pigment laid over & incl 20 mm thk screed bed in CM 1:4 all as spd & dir

Vtreous china squatting pan ‘Orissa’ pattern size 580X440mm , white with integral foot rest (Excluding flushing system and flush pipe) with ‘P’ or ‘S’ trap complete all as specified and as directed by Engineer-in-Charge

PVC valve less symphonic action type flushing cistern low level white inlet, ball valve, float and handle including brackets., Flush pipe and PVC connection, capacity of tank 10 Ltr complete all as in repairs complete all as specified and as directed by Engineer-in-Charge

Vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) including connection to drain and flush pipe, fixed in repair complete, all as specified.

Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixed in repair, complete all all as specified.

Cast copper alloy, chromium plated hand shower (health faucet) with 8 mm dia, 1.00 metre long flexible tube and wall hook, IN REPAIR, complete all as specified and as directed by Engineer-in-Charge.

In repairsVitreous china wash hand basin white flat back size 580x450mm including waste chain and plug and porcelain stopper but incl bracket CP waste coupling & waste pipe fixed in repair complete all as spd.

In repairs bib taps fancy type ,cast copper alloy,long body chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm complete all as specified.

In repairs Angle valve/ Stop valve, fancy type, chromium plated,( concealed with adjustable wall flange), cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore and fixed in repairs, all as specified.

In repairs Pillar tap , cast copper alloy, fancy type with capstan heads , chromium plated , screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm complete all as specified.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm dia complete all as specified and as directed by Engineer-in-Charge

Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore all as specified.

Fixing only steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia15 mm, all as specified.

S&F PVC connection 15mm size with PTMT nuts of length 450 mm, fixed in repair complete all as specified.

Taking down chowkat or framed with shutter (without taking off shutter from the frames) not exceeding 1..5 Sqm each complete all as specified and as directed by Engineer-in-Charge

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc 1..5 Sqn but n.exc 4 Sqm each complete all as specified and as directed by Engineer-in-Charge

Taking down shutters of any description area exc 1 sqm and n. exc 2 sqm each complete all as specified and as directed by Engineer-in-Charge

Refixing of shutters of any description area exc 1 sqm and n. exc 2 sqm each in same opening complete all as specified and as directed by Engineer-in-Charge

Pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, complete all as specified

Pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, complete all as specified

Factory made steel windows (Box type hinge) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, complete all as specified & shown in drawings.

Factory made steel windows (Box type hinge) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer complete all as specified & shown in drawings.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed by Engineer-in-Charge

35 mm th factory made 2nd class hard wood rail and style, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

35mm thick 2nd class hard wood Glazed and skeleton shutters open rebated & prepare to receive glass, gauge etc (without sash bars /edges of framing plain chamfered or rounded, fitted with cut and mitred beds for securing glass etc) size of members of shutters as spd in SSR Part-I section-8 clause 8.2 (A).

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed by Engineer-in-Charge

Preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

Preparation of new iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

Providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.

Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing on Page No 160 MES SSR-2010 Part-II and as directed by the Engr in Charge.

Factory made solid pannel PVC door shutter 30 mm thick ( style) consisting of frame made out of M S tubes for top and bottom rails. M S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement , supplying and fixing in the frame at site as per specification and drawing , complete all as specified in SSR and as directed.

Mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified.

Mild steel cold rolled butt hinges medium weight 75 mm long complete all as specified.

150 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engineer-in-Charge

100mm Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by Engineer-in-Charge

150 mm long extruded aluminium ally handles, fabricated type., anodised complete all as specified and as directed by Engineer-in-Charge

300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge

Mild steel, 300 mm, helical door spring including roller and roller plate complete fixed to wooden or steel door frame by nail or welding (which ever is feasible) etc, complete all as specified.

Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing,anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified

Powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed by Engineer-in-Charge

Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets,all as specified.

False ceiling with Fibre cement Designer tile any colour painted (Hight Pressure Steam Cured) of 6mm thickness (as per IS-14862) of size 595mm x 595mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspeneded on inter locking metal grid of hot dipped galvanised steel sections (galvanised @120 gms, both sides inclusive) consisting of main T runner with suitably spaced joints to get required length and 15 x 32mm made from 0.30mm thick sheet and cross T of size 15 x 32mm made of 0.30mm sheet spaced between main T at 600mm c/c from a grid of 600x600mm and well angle of size 15x20mm made of 0.30mm thick sheet and laying false ceiling tiles in the grid including required cutting/ making opening for services like diffusers grills, light suspended from ceiling using GI soffit cleats fixed to existing rafters, prulin etc with dash fastners GI adjustable rods of 3mm dia with galvanised butterfly level clips, spaced at 900/1200mm c/c along main T bottom exposed width of 15mm of all T Section shall be centre black prepainted with polyster paint and having a load bearing electric wiring and fixture complete all as specified and directed by Engr-in-Charge.

4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium frame work with screws, complete all as specified and as directed by Engineer-in-Charge

Hacking out old broken glass any thickness, size quality from wooden frame or steel frame glazed with putty or fixed with beads complete all as specified and as directed by Engineer-in-Charge

4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

4 mm thick figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and as directed by Engineer-in-Charge

Steel rolling shutters of lath thickness 1.00 mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; gear operated type with bevel gear box and crank handle

Dismantling asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified and as directed by Engineer-in-Charge

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Safety lever locks mild steel with 4 leavers for rolling shutters complete all as specified and as directed by Engineer-in-Charge

Ball bearing for rolling shutters in repairs complete all as specified and as directed by Engineer-in-Charge

Rotational moulded PVC water tanks of Cap 1000 Ltrs cyclingdrical vertical with closed top hoisted and fixed in position all as spd in SSR Part incl fixing of 20mm PTMT float valve medium grade dismantling of existing unserviceable water tanks and removal from site.

Rotational moulded PVC water tanks of Cap 500 Ltrs cyclingdrical vertical with closed top hoisted and fixed in position all as spd in SSR Part incl fixing of 20mm PTMT float valve medium grade dismantling of existing unserviceable water tanks and removal from site.

Alishan Builders

takashdeep traders

APARANA ENTERPRISES

MAHAJAN TRADING CO

RUDRABHISHEK CONSTRUCTIONS