PROVISION OF CERTAIN SANCTIONED AND MINOR WORKS IN CABS AND CEMILAC UNDER GE I RD EAST BANGALORE

Amount

M&L for 2mm thick epoxy resin based floor topping after priming the surface solvent base epoxy resin primer designed for maximum absorption and adhesion as per manufrature specification including prepartion of floor by wire brushing or light grit blasting to remove laitance, dust and cleaning the same to acheive machanical key between the floor and coating system and applying epoxy putty mixed with suitable fillers to cover the worn out areas including taking down old lenoniume sheet and making good and smooth surface all as specified and as directed. Note :- (a) Floor topping shall be Nitoflor SL 2000 of M/s FOSROC/MASTERTOP TM 1215 PLUS of BASF or equivalent in CIPY. (b) Primer shall be Nitoprime 25 of M/s FOSROC or equivalent in BASF/CIPY. (c) Epoxy putty shall be Nitoflor FC 140/150 of M/s FOSROC or equivalent in BASF/CIPY.

M&L 50 mm wide yellow marking reflective tape for floor marking complete Make :3M/Dark Eye

M&L preparation of old painted steel surfaces of any description over 10 cm girth or width and applying one coat of synthetic enamel paint all as directed by Engineer-in-charge (ht upto 10 mtr including all necessary scaffolding)

Material and labour for preparation of old wall surfaces and applying one coat of plastic emulsion paint complete all as specified and directed (ht upto 10 mtr including all necessary scaffolding)

Material and Labour for Preparation of old surface and applying one coat of distemper oil emulsion on ceiling surfaces complete all as directed by Engineer-in-charge.(ht upto 10 mtr including all necessary scaffolding)

Surface excavation, n exc 30cm deep and averaging 15 cm deep and getting out soft/loose soil.

Rolling and consolidating formation surfaces in cutting with power roller 8 to 12 tonne all as specified

M&L soling (or sub base) 100mm thick with broker boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and as directed.

M&L 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and as directed.

M&L Cement concrete work in pavement / hard standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and as directed.

M&L formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all n.exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening.

Finishing surfce of concrete pavements by brooming

M&L forming only 12 mm thick expansion joints in pavements for 200 mm thick concrete slab and filling with bituminous pre formed filler board and top 30 mm filled with primed and sealed with sealing compound grade A complete all as specified and as directed

M&L forming only contraction (Dummy joints 65mm deep x 10mm wide and filled with sealing compound grade A complete all as specified and as directed.

M&L painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow with adequate no of coats complete all as specified and as directed.

M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L preparation of new concrete surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Removing of excavated materials to a distance exc. 5 KM, but n.exc 10.0KM and depositing out side MD land.

M&L Second class hardwood framed, wrought and fixed as in scantlings complete all as specified

M&L 9 mm thick Plywood, grade BWR,type BB, fixed with screws to timber frame-work as in leveling under wall panelling complete all as specified and as directed.

M&L 1.5 mm Decorative laminates type I, or surface finish, colour and pattern as approved fixed with approved adhesive as per manufacturers instructions

S&F Anodised aluminium powder coated frame for doors window,partition and ventilator with one or more rebates including joining cleat for fixing etc complete all as specified

S&F Anodised aluminium powder coated door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc complete all as specified and as directed.

S&F Anodised aluminium powder coated window and ventilators shutters,aluminium section sliding or fix type weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc complete all as specified and as directed.

S & F sheet glass 5.5 mm thick ordinary quality frosted on one side in n. exc 1.5 Sqm in each pan with rubber beading as in doors and partition complete all as specified and as directed.

S&F Prelaminated particle board 12 mm thick, exterior grade,prelaminated both side with decorative choice lamination fixed with screws to timber frame work as in aluminium door and partition complete all as specified and as directed.

S & F sheet glass 4mm thick ordinary quality n. exc 1.5 Sqm in each pan with rubber beading as in windows complete all as specified and as directed.

M&L complete removal of existing treatment and preparation of old plastered surfaces of wall and applying 1.5 mm thick wall care putty to receive the good & smooth surfaces and applying two coats of distemper oil emulsion paint over a coat of primer.(ht Upto 20 Mtr including all necessary scaffolding)

M&L for pre-cast cement concrete, type C1 (PCC 1:3:6), block masonry with solid blocks, exc 10 cm in width and setting mortar in CM 1:6, complete all as specified and as directed.

M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

M&L preparation of new plastered surfaces of wall and applying 2mm thick wall care putty in two layers to receive the good & smooth surfaces and applying two coats of distemper oil emulsion paint over a coat of primer complete all as specified and as directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cm 1:6 complete all as specified and as directed.

Material and labour for glazed coloured ceramic tiles in vertical surfaces for wall tiles of size 450 x 300 x 7 mm thick as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles with joint free including 10mm thick rendering in cm 1:4 complete all as specified and as directed.

Supply and fix 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix PVC (SWR) bends any radius 75 mm dia of bore.

Supply and fix PVC (SWR) bends any radius 110 mm dia of bore.

Supply and fix PVC (SWR) floor trap 75 mm dia out let with grating plain including jointing with solvant cement complete all as specified and as directed.

Supply and fix PVC (SWR) gully trap 125/110mm with Grating, setting and jointing with solvant cement complete all as specified and as directed.

S & F for vitreous china semi pedestal pattern (Anglo -Inidan Type) white or colour (excluding fixing bolts, flushing cistern and flush pipe including connection to trap and to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified and as directed.

Supply only plastic water closet seat ,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised highing device complete all as specified and as directed.

S & F for Vitreous china wash basin angle back (Oval type) size 600 x 480 mm white excluding taps waste chain and plug and porcelain stopper including cutting for and pinning in ends of brakets or eracting stand , waste pipe complete all as specified and as directed.

S & F pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

M&L Granite (of any type) work 20 mm thick (table rubbed and polished)in staie case steps, jambs, pillars, windowcills, cooking platforms and like in including cement mortar (1:4) pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and as directed.

Supply and fix PVC valveless, symphonic action type, flushing cistern low level, white with inlet ball valve float and valve float and handle including brackets 10 ltrs capacity complete all as specified and as directed.

Supply and fix flush pipe of polyethylene of high density of PVC 32 mm for low level cistern.

Supply and fix brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing union cap and fixed 32 mm, complete all as specified and as directed.

Supply and fix PVC connection 15 mm size with PTMT nuts of length 600 mm

Supply and fix stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe, fancy type chromium plated, 15 mm size, complete all as specified and as directed.

Supply and fix health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

Supply and fix soap dispenser chromium plated Make Jaquar CAT No 1137 or equivalent

Supply and fixing in position CP recessed type toilet paper roll holder of size 150 x 150mm with necessary CP screws and washers fixed to wall fixed complete all as specified and as directed

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for PCC 1:2:4, type B1 average thickness 40-70 mm thick (using 20 mm graded stone aggregate) as in flooring/ paving finished rough to receive tile complete all as specified

M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed (MAKE:HR JOHNSON/KAJARIYA/SOMANY)

M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed (MAKE:HR JOHNSON/KAJARIYA/SOMANY)

S&F bass chromium plated brass tubular towel rail 20mm dia, D type 60cm long between flange complete all as specified and as directed.

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

S & F fancy type 15 mm bib taps, cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete

Taking down and re-fixing the existing galvalume sheet/Puff panel in roof and wall complete all as directed.

Alluminium composite panel, Matalic series of approved shade, the panel shall be of 5mm thick with combination of alluminium skin materials of 0.50mm thick alluminium sheet of alloy grade 1100 H cover material coated on external side with PVDF (Poly vinytedene floride) of KYNAR, PVDF coating containing 70% KYNAR 500 resign for antifungal & anti bacterial properties & the central core shall be natural polyethylene(LDPE and HDPE) bonded to alluminium skin on both sides cladding panel to be fixed with extruded alluminium basic frame 50x25x1.5 mm with angle cleats, weather sealants, revits, GI brakets all as approved using suitable bolts on walls including necessary acessories, scafolding, etc., complete for finished item of work and all as per manufecturer's instructions. all as specified & directed. Make -Erobond /Duro build/Aluco Bond/ Reyno Bond/ Lenox - make as approval by GE. Note :- Anodised aluminium C section, GI brakets etc shall be measured and paid separately under respective items of this schedule.

Demolition of brick work or stone masonary/boulder masonary, built in cement mortar including all quions, arches,pillars etc but excluding ashar facings, dressed stone work and precast article etc and depositing of debris out side MD Land all as specified and directed.

Material and labour for PCC 1:2:4 type B 0 (using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges and similar work complete all as specified and as directed .

Taking down cement or cement lime plaster of any description from walls, including racking out joints hacking for key scrubbing down with water etc , complete all as specified.

M&L Rendering 15 mm thick cement mortar 1:4 on stone masonry wall finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 10 mm thick in cement mortaor 1:6 on fair faces of brick work or concrete surfaces complete all as specified and as directed

M&L preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion paint over a coat of primer complete all as specified and as directed

M&L applying two coats of exterior emulsion finishing walls with Acrylic Smooth exterior paint of required shade applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on wall new plaster surface including cornices, plasters etc by all as specified and directed (Make/ Brand Name : Asian Paints/Apex ultima, Berger Paints/Weather coat All Guard, Jenson /Nicholson/Safe Guard).

M&L applying PUROOFKOAT,single component,cold applied,water based Polyurethane modified acrylic dispersion with highly elastic and UV resistant water proofing treatment to the Roof@ 1.2kg/per m2 to confirm to ASTMD 6083-97 a with a density of 1.25 to1.3 kg/per ltr,having tensile strength of 1.5N/mm2, having elongation of 350% with solid content no tless than 60% in 3 coats including self-priming of same material after dilution of water at 50% and spreading 60gsm Geo-Textile between two top coats completely as per specification and direction of Engineer in charge.

S & F for venetian blinds verical type 100 mm width with approved fabric and powder coated aluminium fittings such as top rails metal weight nylon button loops etc to match with the top rail metal base complete all as specified Make :Vista

Dismantling boarding, any description, fixed in any position with screw

M&L Solid PVC lining/ceilingconsist of 5mm thick wood grain printed pvc sheet inclusive of solvent and fixing at site on pvc frame complete all as specified and directed.

S&F anodised aluminium snap grid frame work for false ceiling all as specified including provision of necessary frame work as in false eiling, complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified

Supply and fixing of armstrong ceiling system with fine fissured edge tiles having humidity resistance (RH) of 95%, NRC 0.34 light reflectance approx 84% Thermal conductivity K=0.052 - 0.057. W/mk colour white fire performance of class-I as per BS 476 part 6 & 7 in module size of 600 x 600 x 16 mm thick suitable ofr green building appliation with recycled content of 38-41% with Armstrong silhouette profile exposed grid system with 15 mm white flanges incorporating 6 mm central reveal in white/black colour. Silhoutte, main runners & cross tees to have mitred ends & birdsmouth notches to provide mitred cruciform junctions. The Tee sections have a galvanising of 170 gms per sqm & passed through 500 hrs of salt test. The main runner spaced at 1200 mm c/c should be securely fixe to the structural soffit using Armstrong suspension system at 1200 mm maximum c/c. The first/last Armstron suspension system at the end of each main runner should not be greater than 450 mm from adjacent wall. Cross Tees 1200 mm long should be interlocked between main runners at 600 mm c/c to form 1200 x 600 mm module. 600 x 600 mm module is fortned by fitting 600 mm long flush fitting cross Tees, Perimeter trim consist of Armstron wall angles of size 3000 x 19 x 19 mm secured to walls screws at 450 mm c/c

S R CONSTRUCTIONS

S CHANDRASHEKAR (SREE BUILDERS)

Moulya Builders

SAPTHAGIRI CONSTRUCTIONS

SHRI NARAYANADRI ENGINEERS & BUILDERS

PRAGATHI BUILDERS