Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.7 LAccepted-AOC 17 C LADHOWALI ROAD OPP G G S C SCHOOL JALANDHAR | L1 | Accepted-AOC L1 bidder | |
| 2 | Not Admitted-Finance 218 2ND FLOOR U S COMPLEX 120 MATHURA ROAD NEW DELHI 110076 | SOUTH | DELHI | 110076 | - | Not Admitted-Finance Not qualified for AOC | |
| 3 | Not Admitted-Finance 173 SHAMLI SHIV VIHAR RAIL PAR SHAMLI UTTAR PRADESH 247776 | SHAMLI | UTTAR PRADESH | 247776 | - | Not Admitted-Finance Not qualified for AOC |
Tender Value
₹40.0 L
EMD Value
₹79,902
Closing Date
29 Sept 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SANJEEV LUTHRA
HEAD CMD SCL SEMI CONDUCTOR LABORATORY SECTOR 72 SAS NAGAR
Minor Civil and Maintenance Works at SCL Premises Sector 72 SAS Nagar
2023_SCL_769199_1
SCL/CMD/QNo336
Open Tender
Civil Works
Item Rate
365 days
SCL SAS NAGAR
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹79,902
Yes
12 Dec 2023
30 Aug 2023
2 Oct 2023
30 Aug 2023
29 Sept 2023
31 Aug 2023
31 Aug 2023 - 15 Sept 2023
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
a) All kinds of soil
Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
All kinds of soil
Pipes, cables etc, not exceeding 80 mm dia.
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Supplying and filling in plinth with fine sand under floors including,watering, ramming consolidating and dressing complete
Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering--All work upto plinth level.
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)
1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level:
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources)
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note:- Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement
All works upto plinth level
Concrete of M25 grade with minimum cement content of 330 kg /cum
All works above plinth level upto floor V level
Concrete of M25 grade with minimum cement content of 330 kg /cum
Steel Reniforcement for R.C.C work including straighting , cutting, bending ,placing in position and binding all complete .
Thermo-Mechanically Treated bars of grade Fe-500D or more
Straighting, cutting, bending ,placing in position and binding Steel Reniforcement for R.C.C work all complete as per directions of E-I-C. (Steel Reinforcement to be provided by SCL free of cost).
Centring & shuttering including strutting, propping etc and removal of form work for:
Foundation, footings, bases of columns etc for mass concrete
Suspended floors, roofs, landings, balconies & access platform, sheleves etc.
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Columns, Pillars, Piers, Abutments, Posts and Struts
Small lintels not exceeding 1.5m clear span , moulding as in cornices, window sills ,string courses,bands, copings ,bed plates, anchor blocks and the like.
Edges of slabs and breaks in floors and walls
Under 20 cm wide
Brick work with F.P.S bricks of class designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand)
Cement Mortar 1:6 (1 cement: 6 Coarse sand )
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes, sizes and closing cutouts/opening in
Cement mortar 1:4 (1 cement : 4 coarse sand)
Cement Mortar 1:6(1 cement: 6 Coarse sand )
Half brick masonary with F.P.S bricks of class designation 75 in superstructure above plinth level upto floor V level.
Cement mortar (1:4) 1 cement : 4 coarse sand
Extra for providing and placing in position 2 nos. 6 mm dia. M.S. bars with 6 mm dia M.S. bars links @ 230mm c/c at every third course of half masonary.
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
Second class teak wood
Kiln seasoned and chemically treated hollock wood
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame
Providing and fixing to existing door frames
30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge
Pre-laminated particle board with decorative lamination on both sides
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers or 50 mm long SS studs whichever is suitable all complete as per directions of E-I-C.
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :
5.5 mm thick glass panes
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
For fixed portion
Powder coated aluminium sections (minimum thickness of powder coating 50 micron)
For shutters of doors, windows & ventilators including providing and fixing SS hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket, brush beading etc. required (Fittings shall be paid for separately).
Powder coated aluminium (minimum thickness of powder coating 50 micron)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-In-Charge. (Cost of aluminium snap beading shall be paid in basic item)
With float/froast glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
French spirit polishing : Two or more coats on new works including a coat of wood filler
Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 20X5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board / Block Board as per direction of Engineer-in-charge.
Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer-in-charge
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.
Providing and fixing approved make magnetic catcher in cupboard shutters including fixing with necessary S.S screws etc. all complete
Double strip (horizontal type)
Providing and fixing Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings including sealing of joints using appropriate sealant, as per the approved shop drawings, as specified, and as directed by the Engineer- in-Charge.For payment, only the actual area of glass on face # 1 of the glasspanels (but excluding the area of grooves and weather silicone sealant)provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*).“(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc..The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
Providing and fixing Black (dark) film on glass window / doors etc., complete all as per manufacturers specifications and as per the directions of Engineer-in-Charge.
Providing and fixing reflective SUN CONTROL film on window / ventilators / clear storey windows glass panes etc., complete all as per manufacturers specifications and as per the directions of Engineer-in-Charge.
Providing and fixing Designer Glass Film with Logo Print ventilators /clerestorey windows, glass panes etc. complete all as per manufacturer's specification and direction of EIC.
Supply and installation of Vinyl coated ultra home decor wall paper of approved shade/colour/designed flocked paper on the walls with suitable adhesive .The wall paper shall be washable ,resistant to stains and can be scrubbed easily.The installation shall be in such a way that the wall paper appears jointless and edges should not peel off.Before execution of work ,it should be ensured that the wall is made smooth with suitable fillers,all as per standard practice and direction of Engineer-In-Charge.
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987 Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm)
i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36KGto 80KG and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
Structural steel work riveted, bolted or welded in built up sections, trusses , framed work, stringer , treads and landing of staircases, railing , guard bar, gratings , gatesand similar work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Hot finished welded type tubes
Steel work with all type of available steel section at SCL including cutting, hoisting, fixing in position , welding etc. complete.( Labour Rate) (Steel shall be supplied by department at free of cost)
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer
Using M.S. angels 40x40x6 mm for diagonal braces
NOTES FOR MARBLE / GRANITE/TILE FLOORING ITEMS: 1) The brand name / local name specified for coloured marble / slabs / granite stone slabs are meant for the approved quality available in the region. 2) White cement wherever specified for items shall be of Birla White or equivalent. 3) The newly laid floor shall be protected with a layer of gypsum / POP (Plaster of Paris) laid over a polythene sheet by covering the entire finished surface as directed till the finished items like painting / polishing etc. This shall be done irrespective of whether mention has been made in the individual flooring items or not at no extra cost.
52mm thick cement concrete flooring with concrete hardener topping under layer 40mm thick cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2(1 cement hardener mix:2 graded stone aggregate 6mm nominal size) by volume hardening compound is mixed @2 litre per 50Kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
Providing and fixing glass strips in joints of terrazo/ cement concrete floors.
40 mm wide and 4 mm thick
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.
Size of Tile 600x600 mm .
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
Size of Tile 600x600 mm
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.
In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
Acid and alkali resistant tile
In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
Acid and alkali resistant tile
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge.
Size of Tile 600x600 mm
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
25 mm thick
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush.
Red sand stone
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble
Area of slab upto 0.50 sqm
Granite of any colour and shade
Area of slab upto 0.50 sqm
Providing edge moulding to 18 mm thick granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
Marble Work
Granite work/Marble Work
Providing and laying 2mm thick Unbacked flexible fully homogeneous PVC sheets in Floor and Skirting of approved make and quality (Polyflor, LG, FORBO, Responsive, Armstrong, Premier or as approved by E-I-C.) make conforming to IS: 3462-1986.P.V.C flooring/ skirting with P.V.C sheets including preparing the surface, cleaning as required and applying adhesive - as recommended by the P.V.C manufacturers, laying, aligning, cutting in required size and pattern, trimming, removing the adhesive stains on the surface rolling with 100lb roller and sealing up the joints with fuse welding as recommended by the manufacture including cleaning the surface using a cloth or mop and wiping the surface with soft dry cloth etc; complete all as per specifications and direction of Engineer-in-charge.
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
In 75x75mm deep chase
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) including flushing total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
Ridges plain (500 - 600mm)
Providing and fixing 2mm thick solid compact poly carbonate sheet of approved make and shade on the MS frame work with self driven/self tapping screw of required/approved size and providing silicon sealent etc. complete all as per manufacture's specification and direction of E-I-C. (Approved brand: DURATUFF, GE-LEXAN)
Providing and fixing 10mm thick multi wall poly carbonate sheet of approved make and shade on the MS frame work with self driven/self tapping screw of required/approved size and providing silicon sealent etc. complete all as per manufacture's specification and direction of E-I-C. (Approved brand: DURATUFF, GE-LEXAN)
a) Before commencement of plastering the area shall be very closely hacked, cleaned, wetted and shall be marked with 'Thiyyas' or 'Tapanis' and shall be got approved by the Engineer-in-charge with no extra cost to deptt. b) Whenever the electrical contractor/ agency has to fix up switch boxes in walls, necessary Thiyyas or Dhadas shall be arranged prior to plastering so that the electrical boxes are fixed properly in line with the finished plastered surfaces c) No extra claim/cement consumption shall be entertained by the Department for the plastering done more than the specified thickness shown in the schedule of quantities to bring the plastered surface to perfect line, level and plumb with adjoining columns and beams. d) Grooves of desired size in plaster shall be provided by the contractor without any extra cost to the department. e) Washed river coarse sand shall be used
12mm cement plaster of mix :
1:6 (1 cement: 6 coarse sand)
6 mm cement plaster of mix :1:3 (1 cement: 3 coarse sand)
15 mm thick cement plaster on rough side of single or half brick wall of mix :
1:6 (1 cement : 6 Coarse sand )
Pointing on brick work or stone flooring with cement mortar 1:3 (1 cement: 3 coarse sand) :
Flush / Ruled/ Struck or weathered pointing
Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size, dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 Coarse sand) mixed with 10% finely grounded hydrated lime by volume of cement.
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps i/c making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall
15 mm dia. nominal bore
20 mm diameter pipe.
Providing and fixing brass stop cock of approved quality
15mm nominal bore
Providing and fixing brass bib cock of approved quality
15mm nominal bore
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
Providing and fixing counter sunk wash basin cutting and making good the walls wherever required
White Vitreous China wash hand basin counter top oval 510 x 430mm (approx)
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
15 mm nominal outer dia Pipes
20 mm nominal outer dia Pipes
25 mm nominal outer dia Pipes
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Semi rigid pipe
40 mm dia
Flexible pipe
40 mm dia
Providing and fixing wall hung European water closet suite (Double Syphonic Type ) comprising of : Best Indian make white glazed viterous chinaware wall hung European water closet, Double symphonic pattern of approved make conforming IS :2556 - part -II fixed to wall with necessry CI chair suppiled by manufacturer. White glazed vitreous chinaware low level flushing cistern 10 ltrs capacity suitable for double symponic water closet bearing ISI mark with all internal fitting , mounted with suitable heavy duty seat cover over closet with necessary fixtures. including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
W.C. pan with ISI marked heavy duty white solid plastic seat and lid
Providing and fixing uplasticised PVC connection pipe with brass unions
45 cm length
15 mm nominal bore
Providing and fixing Brass pillar cock of approved quality and colour
15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
Providing and fixing in position Hand shower (Health faucet) ABS body with 8mm dia., 1.2 metre long flexible tube & wall hook including necessary fixtures etc all complete as specified and as directed by E-I-C.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes
75 mm diameter
110 mm diameter
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :
25 mm nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
25 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
25 mm nominal bore
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :
Kitchen sink without drain board
610x460 mm bowl depth 200 mm
Providing and filling in position, blown bitumen in expansion joints
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Circular tank
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge
Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete
450 mm dia RCC pipes.
600 mm dia RCC pipes.
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete
300 mm dia. R.C.C. pipe
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329
150 mm dia Ductile Iron Class K-7 pipes
Providing and fixing Stainless steel towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality.
Providing and fixing Stainless steel towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality.
450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms
Providing and laying APP 3mm thick (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ltr and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations:
a)Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge
d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
e)The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
Making top khurras 45x45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 Coarse sand : 4 graded stone aggregate of 20mm nominal size) over P.V.C sheet 1m x1m x 400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete.
Providing and laying one layer of blown grade 85/25 bitumen (ISI marked) @ 1.2Kg/Sqm over the bitumen primer compatible to APP membrane etc. complete as per the manufacturer's specification and direction of Engineer-In-Charge.
Extra for providing and mixing water proofing material in cement per bag of plaster work in proportion recommended by the manufacturers
The Contractor has to submit a Performance Bank Guarantee of 10% of the value of the work under item No. 192 to 202 (i.e. WPT items) for a period of 10 years.
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge
Laying available cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge.
Surface dressing on old surface with hot bitumen of grade VG - 10 of approved quality using 1.95 kg of bitumen per sqm with 1.50 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface,including consolidation with road roller of 6 to 8 tonne capacity, etc. complete.
Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications :
On bituminous surface @ 0.50 Kg / sqm
Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.
40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in drum Type Hot Mix Plant of 60-90 TPH capacity
Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers,laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.
25 mm compacted thickness with bitumen of grade VG- 30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
a) Two or more coats on new works
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.
With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre
With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
Applying priming coat:
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)
White washing with lime to give an even shade :
Old work (two or more coats)
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade
Old work (one or more coats applied @ 0.83 ltr/10 sqm).
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade
One or more coats on old work
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
One or more coats on old steel surface
Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :
75 mm diameter pipes
100 mm diameter pipes
150 mm diameter pipes
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. Note: The work includes (Preparing the old painted surface by sandpapering with emery paper, filling the crevices and smoothning wall surface with two coats of suitable epoxy putty where ever required.) Painting the old prepared wall surface with two or more coats of approved Epoxy Coating of approved brand and colour to give an even shade with lamb wool roller/spray to give a required finish. Including scaffolding, etc. complete all as per manufacturer's specification and direction of deptt.
On Steel surface:
On concrete work
Providing and laying specified thickness of self levelling epoxy floor topping of approved make over a coat of epoxy primer. with mixture of base, hardener,filler & colour paste (as per requirement w.r.t to consistency). Mixing has to be done with slow speed heavy duty drilling machine for about 3-4 minutes till a uniform colour and consistency of the mix is obtained. The mixed material should be poured on the surface and spread to the required thickness with a steel serrated trowel, followed by rolling with a spiked roller thoroughly to release the entrapped air in the film for about 30-45minutes. Including new & old surfacing preparation by grinding & resurfacing worn out/ damaged areas with approved epoxy resin based putty and a coat of epoxy primer cleaning the surface free from grease, dirt, oil or other contamination by approved solvent. all as per manufacturer's specification and direction of the Engineer-In-Charge.
2mm thick self levelling epoxy floor on existing Cement Concrete floor surface
1mm thick self levelling epoxy floor on existing Epoxy painted floor
Painting with aluminium paint of approved brand and manufacture to give an even shade:
One or more coats on old work
Providing Acid Resistance FRP Lining over the effluent tank floor and wall surfaces with three or more coats of Epoxy Acid resistant coating sanwhiched with approved glass fibre mesh ( 0.3 kg/sqm) of approved colour to give an even shade with lamb wool roller /sprayer over a coat of compatible Epoxy Primer to give a required finish including scaffolding etc complete all as per manufacturer specification and direction of E-I-C.
Providing and applying two coats of acrylic-aliphatic polyurethane paint (UV resistant) on external surface of cryo vessels by air less spray gun of approved brand and shade over a coat of compatabile epoxy mastic primer (Rust proof primer) on old work etc. up to height of 14m from the ground level, all as per manufacturer's specification and direction of the Engineer-In-Charge(E-I-C). Rate shall include providing double scaffolding system (cup lock type), preparation of existing painting surface including removal of corrosion, applying rust proof primer and metal putty using hand tools etc. to make the surface suitable to receive fresh paint by air less spray gun as per direction of E-I-C.
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
With cement mortar 1:4 (1cement: 4 coarse sand).
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per directions of Engineer-In-Charge.
For door/ window/ clerestory window
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
In cement mortar
Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured):
From brick work in cement mortar
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
Of area 3 sq. metres and below
Of area beyond 3 sq. metres
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer-in-charge :
Water bound macadam road
bituminous road
Cutting holes up to 30x30 cm in walls/Floor including making good the same
With common burnt clay F.P.S. (non modular) bricks
Removing existing PVC flooring & skirting, cleaning the surface by suitable thinner and disposal of unserviceable material from the area to the identified place in the SCL campus, stacking etc. all complete as per the direction of Engineer-In-Charge.
Disposal of building rubbish / malba / similar unserviceable,dismantled or waste materials by mechanical means, including loading, transporting, unloading to the authorised Mohali Municipal Dumping Ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Impt Note:1. Measurement for disposal shall be taken by measuring the size of the trolly. The net volume of the malba disposed shall be reduced by 20% for voids for making payment.
Extraction of Pump & Motor including all accessories from the existing Borewell
Lowering of Pump & Motor including all accessories in the Borewell
Brick work with FPS brick work of class 7.5 at all levels using bricks obtained after dismantling/supplied by SCL as per direction of E-I-C
a) Cement mortar ( 1 Cement: 6 Coarse Sand)
Removing existing water proofing treatment (Tar felt) over the roof of buildings including disposal of debris outside the SCL complex to the authorised dumping ground in Mohali.
Cleaning sewer line Man holes including removing the top Mild steel covers, grills and refixing the same after removal of earth biomass, foreign material etc, from inside the Manhole, cleaning & removing the same at the identified location in SCL Premises including cleaning of inlet and outlet of pipes etc., all as directed by Engineer-in-Charge.
Desilting and cleaning of main and distribution Storm line in the SCL premises by using suitable type cleaning tools/equipments etc. including manpower and disposal of waste in the identified location all complete to the entire satisfaction of Engineer - in -Charge.
Cutting/Dismantling of existng joints/line in 4"/6" dia D.I Pipe and make it suitable for flanged joints complete etc. all as per direction of E-I-C
Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 :
Upto 600 mm dia
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)
Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth.
Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.
Hacking of CC flooring including cleaning for surface etc.complete as per direction of the Engineer-in-Charge.
Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge
Supply of Hydraulic excavator(3D)with diesel and fuel
Providing and fixing in position pre-cast R.C.C. manhole cover and frame (Medium Density) of required shape, size and approved quality-
Re-lettering work with black Japan paint of approved brand and manufacture on surface of specified size.
Lettering work with black Japan paint of approved brand and manufacture on wall/board of specified size.
Making Logo on wall/board by black japan paint of size upto 300 x 300mm
Making border upto 2" wide around the boards/written surface on wall/board by black Japan paint.
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .