REPAIR AND REPLACEMENT OF PLASTERING FLOORING AND CONNECTED B/R ITEMS IN OTM ACCN ZONE B AND C UNDER AGE B/R-I OF GE (SOUTH) PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed

Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed

Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

M&L for 25mm thick cement cocnrete 1:2:4, type B-0 (12.5mm graded stone aggregate ) as in flooring complete all as specified and directed.

M&L for 100mm thick cement concrete work 1:4:8 type D-2 in sub-case to flooring etc complete all as specified and directed.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 7-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. Note : Dado should be flushed with the wall plastering.

M&L for mat finish anti skid vitrified tile joint free premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed

M&L for mat finish anti skid ceramic tile joint free premium quality coloured tiles 300 X 300 mm and 6-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for Glazed Vitrified Tiles (GVT) joint free premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for Glazed Vitrified Tiles (GVT) joint free premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in skirting/ dado etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 10 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for Glazed Vitrified Tiles (GVT) joint free premium quality coloured tiles 600 X 1200 mm and 8-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, laid and jointed in suitable adhesive (flexiset H-40 or equivalent as approved) as per manufacturer's instructions and pointed in matching coloured cement based tile joint filler (Roff -Pidilite or equivalent as approved), in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over complete all as specified and directed.

M&L for Glazed Vitrified Tiles (GVT) joint free premium quality coloured tiles 600 X 1200 mm and 8-10 mm thick, as in skirting/dado etc. in any pattern of light & dark tiles as approved, laid and jointed in suitable adhesive (flexiset H-40 or equivalent as approved) as per manufacturer's instructions and pointed in matching coloured cement based tile joint filler (Roff -Pidilite or equivalent as approved), in floors etc. over & including 10 mm thick screed in cement mortar (1:4) over complete all as specified and directed.

M&L for 'Machine cut kota stone slab (nearest to 58cmx58cm in size) flooring 18mm (+ 2mm) thick laid over and including 20-22 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 100mm wide border of Baroda Green Marble complete all as complete all as specified and directed.

M&L for Machine cut mirror polish, kota stone slab, 18mm (+ 2mm) thick as in risers of step, skirting, dado etc and including 10 mm thick rendering in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for pre-polished Baroda Green marble, machine cut as in floorings/ shelves/ steps/ cills/ jambs/ skirting/ border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishing complete all as specified and directed. Note : Single piece should be used in steps/cills/jambs/shelves.

Rounding to edges (both side edges) )of stone slabs (of fany description), such as in steps, cooking platform, and other similar situations including rubbing and polishing (mirror finish), complete all as specified and directed.

M&L for Granite (Jet Black colour/shade-South Indian) of any type machine cut as in flooring shelves/steps/counter tops, 18-20 mm thick, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified and directed. Note : Single piece should be used in steps/cills/jambs/shelves.

M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints and filling the same with polyureathene complete all as specified and directed.

Dismantling/ taking down of existing kota stone tiles from flooring and refixing the same after necessary grinding/ cutting etc over and including 20-22 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing, cutting and mirror type granite polishing of existing Kota Stone as in flooring, skirting, steps, shelves etc including filling joints with cement mixed with pigment of same colour complete all as specified and directed Note : 1. Any broken piece of Kota stone will be replaced with new one and the same will be separately under respective item.

M&L for rubbing, cutting and mirror type granite polishing of existing Kota Stone as in flooring, skirting, steps, shelves etc including filling joints with cement mixed with pigment of same colour complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm and n. exc. 2 sqm each and refixing in same opening after minor addition/ aletration repair etc complete all as specified and directed.

S&F 304 Grade stainless steel plate of size 150mm x 450mm with letters/alphabets and border (as approved) printed with CNC/ lazer engraving and filling with suitable black coloued paint/ chemical and fixed at facia/ roof projection/ walls of buildings with suitable PVC wall plugs and s/s screws at height not more than 4.0 mtr complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for dubbing out average 10mm thick in CM 1:4 on irregular surface of soffits of slabs/Chajja/ Sunshades etc complete all as specified and directed.

M&L for Cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement complete all as specified and directed. Note : WPC will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and directed.

M&L for 10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished fair & even without using extra cement complete all as specified and directed.

M&L for 5 mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished fair & even without using extra cement complete all as specified and directed.

Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder or manually (if directed) complete all as specified and directed.

Applying acrylic thick wall care putty on internal surfaces of walls/ceilings (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed.

M&L for preparation of surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc and applying two coat of cement base paint with highlighter of any approved shade @ 5 sq.m/kg/1 coat over & including a coat of exterior wall cement primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of cement based paint by using following brands of cement based paint and primer by brush or roller complete all as specified and directed.

Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Preparation of surfaces and applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceilings surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

M&L for preparing plastered surfaces of walls and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and directed.

M&L for preparing plastered surfaces of ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and directed.

M&L for preparation of surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc and applying one coat of cement base paint with highlighter of any existing shade, @ 5 sq.m/kg/1 coat by using following brands of cement based paint and primer by brush or roller complete all as specified and directed.

M&L for preparing existing treated surfaces of walls including cornices and applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and directed.

M&L for preparing existing treated surfaces of ceilings including cornices and applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and directed.

Taking up or down existing steel tubing and connections, 15 mm bore complete all as directed and specified.

S&F 20mm (OD 22.20mm) CPVC pipes SDR 11, class-1 for potable hot and cold water distribution supplies lead free confirming to IS-15778 laid on walls/ceiling or laying in floors jointed with suitable CPVC solvent cement of same manufacturer and incl all CPVC SDR 11 fittings as required and suitable for fixing 15mm CP faucets/ fixtures complete all as specified and directed.

S&F Vitreous China squatting pan of "Orissa Pattem of size 580x440mm snow white colour ISI marked, fixed in repairs with integral footrest including taking down old unserviceable existing one complete all as specified and directed. Note: The quoted rate shall include provision of "P" Cast Iron trap complete all as specified and directed.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) with S/P trap snow white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete all as specified and directed. Note : EWC with S trap will be provided only on G.F. and other remaining floors will be provided with P trap EWCs.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F CP jet for EWC with chrome finished connction pipe including all accessories for fixing complete all as specified and directed.

S&F flushing cistern of Polymer/PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete all as specified and directed.

S&F vitreous china premium/1st quality wash basin (under counter oval shaped), snow white, size 560x470x190 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions complete all as specified and directed. Note : The items for counter will be measured and paid separately.

S&F in repair, Vitreous China Urinal 375 x 390 x 590 mm, Half stall type, snow white including fixing plug, Cast Iron Bracket duly painted/Erecting Stand including cutting,CP 32mm flush pipe etc all fittings complete all as specified and directed.

S&F 15mm WHB Mixer valve quarter turn for mixing hot and cold water of Brass Chromium Plated screwed down for 15mm dia pipe incl taking down complete all as specified and directed.

S&F 15mm wall mixer valve quarter turn for mixing hot and cold water of Brass Chromium Plated with wall flange/ cups screwed down for 15mm dia pipe incl taking down complete all as specified and directed.

S&F 15 mm fancy type chromium plated quarter turn bib tap of long body with CP wall flange cast copper alloy with crutch or butterfly handles screwed down high pressure suitable for 15mm bore pipe or union including taking down old unserviceable existing one complete all as specified and directed.

S&F Angle valve quarter turn 15mm bore cast copper alloy chromium plated fancy type with CP cup/ wall flange high pressure screwed for iron pipe and fixed, including taking down old unservicable existing one complete all as specified and directed.

S&F 2-way Angular Stop Cock, CP, with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed.

S&F 450mm long braided hose/PVC connection with 15mm brass nuts complete all as specified and directed.

S&F concealed stop cock quarter turn 15mm bore cast copper alloy chromium plated fancy type with CP cup/ wall flange high pressure screwed for iron pipe and fixed, including taking down old unservicable existing one complete all as specified and directed.

S&F 5mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered/bevelled edge etched smooth finish etc.complete all as specified and directed.

S&F CP/matt finished peg set of size 300mm long and 30mm wide with 6 nos hooks of approved quality fixed with suitable screws complete all as specified and directed.

S&F CP finished towel ring square shaped of size 135 x 195 mm including all accessories like wall flange/ cup fixed with suitable PVC wall plugs & screws as per manufacturer's instructions complete all as specified and directed.

S&F soap dish CP plated of suitable size to accommodate soap complete all as specified and directed.

S&F overhead shower minimum 125mm square shaped with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete all as specified and directed.

S&F stainless steel grating 125 x 125 mm size square shaped with self locking arangement for floor trap fixed in position complete all as specified and directed.

CP bottle traps 32mm size with 250mm and 175/190mm long wall connection pipes and wall flanges complete fixed in position complete all as specified and directed.

CP waste couplings 32mm size full thread with 80mm height complete fixed in position complete all as specified and directed.

S&F Self closing angle cock pressmatic for urinal with wall flange and 200 mm connecting pipe complete all as specified and directed.

Urinal spreader for urinals and incl all necessary accessories as recommended by manufacturer for fixing complete all as specified and directed.

PVC(HDPE) SWR , 32 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction, including bends/tee/elbow etc. laid in walls for connecting bottle traps complete all as specified and directed.

M & for water proofing treatment to sunken floor with the following course of treatment/ specification: (i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix) , mixed with WPC as per manufactrrer's instruction laid in slope 1:20 towards spouts including coveting corners (ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as pe rmanufacturer's instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed wth acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs. (iv) Applying 2nd layer of slurry @ 0.242 kg/sqm mixed with accrylic based polymer modified cementenous compound @ 0.126 kg/sqm.This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs. (v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces (vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation . (Make of PU primer - Dek guard EP -302 of M/S Fosroc or equivalant approved brand.Make of PU paint - Dek guard PUor equivalant approved brand. (vii) 2 Nos 40mm bore GI medium grade 450mm long spout ,to be provided through external wall to drainout accumulated water. (viii) Sunken floor shall be tested for water tighness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists (ix) Sunken portion shall be filled with lean concrete of grade M7.5 stone agreegate

M&L for Reinforced Cement Concrete (RCC) 1:2:4 using 20mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Form work rough finished to soffits of suspended slabs such as roof slabs not exc 200mm thick (Horizontal or sloping) complete all as specified and directed.

Form work rough finished to edges of concrete slabs exc 5 cm but not exc 10 cm thick

TMT Bars 10mm dia & over cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, & edges will be painted to match with printed sheet complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm plain colour PVC Sheet on back face complete all as specified and directed.

S&F 1st quality PVC tower bolt 150 mm long complete all as specified and directed.

S&F 1st quality PVC door Handles 150 mm long complete all as specified.

SWAMI ENGINEERS (BID ID -3114587)

Arneja Builders (BID ID -3102433)

ANIL KUMAR AND CO (BID ID -3126564)

Jawandha Enterprises (BID ID -3126618)

M/s Harmans (BID ID -3111973)