REPAIR TO JOINERY, ROOF SHEET, FLOORING, GI AND SANITARY FITTINGS AND OTHER MISC B/R WORKS AT MH UNDER AGE B/R-II AT GE KAMPTEE

Amount

Dismantling of asbestos cement sheet (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed.

Re-fixing only 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts and washer in roofs, walls etc complete all as specified and directed.

M&L for 0.50mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet (AZ150) of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw/ J-type bolt /L-type bolt as per manufacturer instructions complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (AZ150) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ J-type bolt/ L-type bolt complete all as specified and directed.

Dismantling of timber fillets, rails, posts, rafters, purlins under 40 Sq cm in section complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide on new surfaces in any tint complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets any thickness and wall paneling including cover fillets complete all as specified and directed.

S&F PVC insulation panels 5 to 6mm thick with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid in multiple layers made of Aluminium/ G.I./ M.S. as per specification and drawing complete all as specified and directed.

M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted including GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mm x 15mm x 0.30mm, cross tee shall be 32mm x 15mm x 0.30mm thick with black lining in mid portion and wall angle shall be 24mm x 24mm x 0.30mm thick complete all as specified and directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC type B1 (1:2:4) using 12.5mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC type B1 (1:2:4) using 12.5mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for providing precast cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) set in CM 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water roughs, mangers, shelves and similar articles with plain faces, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200 mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed.

M&L for formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. rough finished surfaces of concrete flat complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 22 above but half brick wall in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces with CM 1:4 with liquid WPC on external walls finished even and smooth (without using extra cement) complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces with CM 1:3 on ceiling surfaces finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whiting complete all as specified and directed.

M&L for applying two coats of OBD over a coat of chalk whiting on new wall surfaces including preperation of surfaces complete all as specified and directed.

M&L for applying three coats of white wash on undecorated ceiling surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 300mm x 450mm, on vertical surface such as skirtings/ dados set and jointed in neat cement slurry and pointed in coloured cement to match and including 10mm thick backing coat in CM 1:3 finished even and fair complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular), polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:4 (including bodder tile) complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular), polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10mm thick backing coat in CM 1:3 finished even and fair complete all as specified and directed.

Demolition of stone slabs & tiles of any description or thickness in floors, aprons etc. laid, bedded & pointed in any mortar complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25 mm thick over cement screed base 20mm thick in CM 1:6 laid and jointed wih grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry @ 2 Kg per SQM, mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including 10mm thick screed in cement mortar 1:4 including taking down old one, complete all as specified and directed.

S&F pre-polished granite 20mm thick fixed on platform/ shelves/ steps/ cill over 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc complete all as specified and directed.

Taking down door / window frame with shutter (without taking off shutter from the frame) area not exc 1.50 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed.

S&F pressed steel frame for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed.

S&F pressed steel frame for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed.

M&L for PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate as in filling of pressed steel frame complete all as specified and directed.

S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F 30mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F second class hard wood 35mm thick factory made plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

S&F aluminium (colour powder coated) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as specified and directed. Notes: (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint Make of powder coated Aluminium Sections: Jindal or equivalent.

M&L for aluminium (anodised) grill made out of 5mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) complete all as per manufacturer's catalogue 7 specifications (Make: Grill No. 20 of 'DECO GRILL' or equivalent) complete all as specified and directed.

S&F colour powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F colour powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side/top hung/ type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified and directed.

Supply, fabrication and fixing anodised aluminium doors fixed or openable including frame/ chowkats etc from hollow rectangular sections like chowkats of size 100 x 44mm x 1.59mm (appx), vertical styles of size 82 x 44 x 1.59mm (appx) top and middle rails of size 82 x 44 x 1.59mm (appx) bottom rails of size 114 x 44 x 1.59mm (appx) complete including necessary jointing cleats, glazing clips, anodised aluminium beading and rubber gasket etc for securing glass, anodised aluminium fittings such as handles, other standard fittings, aluminium tower bolts - 2 Nos, Hydraulic Door closer of designation No-3 - 01 No and accessories for locking arrangements etc complete all as specified and directed. Note:- Glazing shall be measured and paid for separately under respective items complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 100mm long SS butt hinges and fixed with screw/welded to frames etc complete all as specified and directed.

S&F in repair 100mm long SS butt hinges and fixed with screw/ welded to frames etc complete all as specified and directed.

S&F 125mm aluminium pressed handles fixed complete all as specified and directed.

S&F 150mm aluminium pressed handles fixed complete all as specified and directed.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 150mm aluminium barrel tower bolts, fixed complete all as specified and as directed.

S&F in repairs 150mm aluminium barrel tower bolts, fixed complete all as specified and as directed.

S&F in repairs 125mm aluminium pressed handles fixed complete all as specified and directed.

S&F in repairs 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/ steel/ aluminium frames glazed with putty or fixed with beads etc complete all as specified and directed.

S&F 5.5mm thick tinted sheet glass ordinary quality and glazing with Al glazing clips & EPDM beading in square exc 0.5 sqm in each pane, complete all as specified and directed.

M&L for 4.0mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each panes complete all as specified and directed.

S&F 4mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/ wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and directed.

S&F in repairs 25mm dia stainless steel curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and directed.

S&F fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed.

Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

M&L for providing 75mm thick cement concrete 1:4:8 type D2 (Using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for pre polished chequered tiles rubber pressed glossy finish (any colour) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and directed.

Refixing old steel tubing and connections 15mm bore in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing old steel tubing and connections 20mm bore in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

S&F in repairs vitreous china white squatting pan "Orissa Pattern" size 580x440mm, with integrated foot rest (excluding flushing sistern, flush pipe etc) including making good to floor complete all as specified and directed.

S&F in repairs wall mounted vitreous china wash down water closet 'P' trap round of size 620 x 360 x 780mm along with soft close seat cover and twin flush (Aquafier EWC P trap) white colour with all fittings including joining mild steel CP or aluminimised hinging device complete all as specified and directed. Make: Prayag cat No 4125 or equivalent of Hindware/ Cera/ Jaquar.

S&F in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and directed.

S&F in repair vitreous china wash basin, white, with padestal flat back, size 540x400mm but including brackets and padestal etc complete all as specified and directed.

Supply only 10 ltr capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed. Make: Prayag Cat No 501 0r equivalent.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed. Make: Prayag Cat No 501

S&F in repairs flush pipe of polythene of low or high density 32mm PVC for low level flushing cistern complete all as specified and directed.

S&F in repairs grating doom 125mm dia of PTMT (minimum weight 40gms) with waste hole complete all as specified and directed.

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and directed.

S&F in repair 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and directed.

S&F in repair pillar taps 15mm of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as specified and directed.

Supply only pillar cock, Swan neck central hole basin mixer with hot/cold connection without pop up waste system complete all as specified and directed. Make:- Prayag Cat part No 8750 or equivalent in Hindware / Cera.

S&F in repair Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, fancy type screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repair bib tap 15mm dia cast copper alloy with crutch or butter fly handle screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs chromium plated shower rose with or without swivel joints of 125mm dia including fixing to 15mm bore of pipe complete all as specified and directed.

S&F in repair long shank and cup (concealed type) stop valve 15mm dia chromium plated fancy type, high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed complete all as specified and directed.

S&F in repair PVC connection 15mm dia, 450mm long including PTMT check nut complete all as specified and directed.

S&F in repairs stop valve/angle cock 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type complete all as specified and directed.

S&F tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x160mm including waste pipe 32mm dia complete all as specified and directed.

S&F waste fitting, 32mm/40mm brass, chromium plated for sink, basin, etc with long screwd shank and fly nut complete all as specified and directed.

S&F in repairs 40mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius for 110mm bore complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius for 75mm bore complete all as specified and directed.

Dismantling water tank of capacity exc 250 ltr & not exc 500 ltrs and removing to store of any description complete all as specified and directed.

Dismantling water tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed, including 20mm bore PTMT float valve including connections complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed, including 20mm bore PTMT float valve including connections complete all as specified and directed.

M&L for gun-metal, globe or gate valves, 15mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 2-way angle cock with flange 15mm dia cast copper alloy chromium plated fancy type, high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed complete all as specified and directed. Make:- Prayag Cat part No 7711 or equivalent.

S&F in repair health faucet of 15mm bore brass cromium plated including PVC pipe to connection GI tubing 15mm bore complete all as specified and directed. Make: Prayag cat no BEA-40.

Supply only plastic water closet seat, back, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs cabinet mirror 400 x 500mm for bathrooms complete all as specified and directed. Make: Prayag Cat Part No 551 or equivalent

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed.

S&F in repair corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. Make: Prayag cat No BEA 44 or equivalent

M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair CP grating of size 100mm dia complete all as specified and directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth in cement mortar 1:3 complete all as specified and directed.

M&L for cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in benching/ coping and the like including weathering slightly round or chamfered angles and throating complete all as specified and directed.

S&F 100mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F stack clamps made out of 25mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe complete all as specified and directed.

M&L for stack clamps out of 50mm by 5mm flat iron and 10mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 75mm pipe complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screw complete all as specified and directed.

S&F 12mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive fixed in aluminium doors, etc complete all as specified and as directed.

S&F in repair 18mm thick Al stone wood Polymer Composive Board (WPC) in cupboard shutter and like with decorative on both side design fixed by drilling screws and brackets complete all as specified and directed.

M&L for rendering dubbing coat over damaged irregular surface of chajjas roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even & smooth including making of drip course as required complete including roughening of surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed. Note: Rate for form work if required to be included in the rate quoted by the contractor.

Welding to existing steel door/gate, window in repairs not exc 2.5 cm in length thickness of metal exc 6mm but not exc 9mm complete all as specified and directed.

Welding to existing steel window in repairs exc 2.5 cm in length but not exc 5 cm in length thickness of metal exc 6mm but not exc 9mm complete all as specified and directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminum rod & high dencity plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210g) complete all as specified and directed.

Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3mm thick and weight not less than 3.00 kg/sqm over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100mm over lap on both sides all as per manufacturer's instructions including 15mm thick cement plaster in CM 1:4 with WPC and two coat of aluminium paint of 0.2Kg/Sqm over membrane complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.)[(-) Rs.43,430.00]

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL

M/s DS Khekde

Bidder Name

M/s DS Khekde

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL