Loading
Loading…
Loading…
Tender Value
₹13.0 L
EMD Value
₹16,300
Closing Date
10 Oct 2026, 6:55 pm2d left
STAFF OFFICER CIVIL JAGANNATH AREA
Office of the General Manager MCL, Jagannath Area Po-Dera,Dist-Angul, Odisha-759103
Providing five nos boreholes with its accessories at different locations of Jagannath OCP projects under Jagannath Area (Retender/2nd Call).
2026_MCL_366664_1
MCL/GM(JA)/SO(C)/e- Tender/26-27/57, Dtd-07/10/26
Open Tender
Civil Works - Others
Percentage
90 days
Jagannath OCP
AS PER NIT
3 documents required · 3 mandatory
₹16,300
7 Oct 2026
7 Oct 2026
12 Oct 2026
7 Oct 2026
10 Oct 2026
7 Oct 2026
7 Oct 2026 - 8 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Boring/drilling borewell of required dia for casing/strainer pipe by suitable methods as prescribed in IS:2800(Part-I) including collecting samples from different strata, preparing and submitting strata chart /bore log, inlduing hire and running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of EIC, up to 90 meter depth below ground level All types of soil 200 mm dia | 250 | m | 459.85 | ₹1,14,962.5 |
| 2 | Boring/drilling borewell of required dia for casing/strainer pipe by suitable methods as prescribed in IS:2800(Part-I) including collecting samples from different strata, preparing and submitting strata chart /bore log, inlduing hire and running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of EIC, up to 90 meter depth below ground level All types of soil 150 mm dia | 200 | m | 408.75 | ₹81,750 |
| 3 | Boring/drilling borewell of required dia for casing/strainer pipe by suitable methods as prescribed in IS:2800(Part-I) including collecting samples from different strata, preparing and submitting strata chart /bore log, inlduing hire and running charges of all equipments, tools , plants & machineries required for the job, all complete as per direction of EIC, beyond 90 meter & upto 150 meter depth below ground level All types of soil 150 mm dia | 300 | m | 459.85 | ₹1,37,955 |
| 4 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia | 250 | m | 1,181.25 | ₹2,95,312.5 |
| 5 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. | 20 | Hours | 819.45 | ₹16,389 |
| 6 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200mm dia | 5 | Each | 703.7 | ₹3,518.5 |
| 7 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200mm Clamp | 5 | Each | 2,034.35 | ₹10,171.75 |
| 8 | Providing of Rigid PVC pipe 50mm outer dia conforming to IS:4985 specification(6kgf/sqcm) | 750 | m | 175.95 | ₹1,31,962.5 |
| 9 | Providing of 40 mm Nozle & cross bolt at site | 5 | No | 282.9 | ₹1,414.5 |
| 10 | Providing of 50 mm dia MS clamp with nuts and bolts | 5 | No | 267.95 | ₹1,339.75 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.11 MB
Tendernotice_2.pdf
PDF • 2.20 MB
BOQ_379604.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .