Providing LIS for Horticulture land for Pabber to Bijori and its surrounding area in of G P Rantari teshil rohru Distt Shimla H P

Amount

Excavation in foundation trenches(for pipes & pits) upto all depths in all class fication of earth work such as pick work, jumper work, saturated soil including bailling and pumping out water, blasting soft/hard rock or chieselling soft/hard rock where blasting is protibited in all lifts including trimming and dressing of sides, leveling of beds to correct grade i/c shoring/strutting, planking,timbering & dewatering wherever required, stacking the useable & unuseable material/soil separately & after laying jointing & testing of pipes, returning the useable soil in trenches in 15cm. layers including consolidating of such deposoited layer by ramming & watering & then disposing of all surplus excavated soil/unuseable material as directed within all leads and lifts including restoration unmetalled surfaces to its original condit on & including cost of diversion for traffic, night signal, fixing caution boards crossing over trenches for access to houses, fencing etc. complete in all respects within all leads & lifts as per direction of Engineer-in-charge.

Providing and laying cement concrete 1:3:6 (1cement: 3 sand: 6 graded stone aggregate 20mm( twenty millimeter nominal size) and curing complete excluding cost of from work in foundation and plinth with in all leads & lifts as per entire satisfication of Engineer-in-Charge.

P/L 1:1:2 & 20mm curing comlete excluding cost of frame work and reinforcement for reinforced concerete work in. foundation & plinth

Foundation and plinth 1:11/2:3 Bed and wall ncluding attached buttress, pillasters and their caps and string cources etc. upto floor two level within all leads and lifts and as directed by the Engineer-in-charge.

foundation, footing basis of columns etc and mass concrete within all leads and lifts and as directed by the Engineer-in-charge

Providing mild steel/tor steel for RCC work including bending binding and placing in p[osition complete upto floor two level within all leads and lifts and as directed by the Engineer-in-charge.

Providing form work with steel plate 3.15mm thick welded with angle iron frames 30x30x5mmso as give a fair finish i/c centring, shuttering, &centring below supporting floor to ceiling not exceeding 4mtrs. &removal of the same for in-situ reinforced concrete & plain concrete work in:

Flat surface such as soffits of suspended floor, roofs, landing and the likefloor etc. upto 200mm in thickness within all leads and lifts.

Vertical surface such as wall(any thickness) partitions and the likeincluding attached pillasters, buttresses, plinth and string cources and thelike within all leads and lifts.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting fixing in postion and applying a priming coat of red lead paint etc.

White washing with lime on undecorated wall surfaces(two coats) to give an even shade I/c thoroughly brooming the surface to remove all dust dirt & other foreign matter. with in all leads and lifts as per the direction of the Engineer in charge.

Laying and jointing in trenches G.M.S tubes (Light/Medium) tube fitting and earth work to be measuread and paid for separetly.

50mm dia (L)

65mm dia (L)

Providing and fixing G.I Union to Pipes of various dia @1no/100 metres of length

50mm dia

65mm dia

Vikram Rithwan Contractor

Harsh Bhagta Govt. Contractor