Repair/replacement of internal wiring and light fitting at MD and OTM Accn at AFS Amla

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fitting fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc. complete all as specified.

Taking down ceiling fans of any size/sweep after disconnecting the wire from existing ceiling rose and refixing the same after cleaning dust, oiling, greasing including providing flexible cable from ceiling rose to connector of fan complete all as directed by Engineer-in-Charge

M&L for point wiring using approved colour coding as per IS with 1.5 sqmm two single core PVC insulated but unsheathed FR cable, 1100 volts grade, ISI-694 marked with multistranded copper conductor and earth continuity wire with similar 1.5 Sqmm cable (including connecting to earth dolly) drawn through ISI Marked heavy duty rigid PVC concealed conduit with all accessories etc with mild steel sunken box duly,concealed in wall and having PVC modular cover plate with frame suitable for modular switch/Sockets/regulators for the following :-

One light / fan controlled by one switch one way.

One light point controlled by two 2 way switches

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board.

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

One bell/ buzzer point controlled by one bell push

All as per item No : 03 but for point wiring with 2.5 Sqmm two single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 Amp socket outlet point on independent board.

M&L for point wiring using approved colour coding as per IS with 1.5 sqmm two single core PVC insulated but unsheathed FR cable, 1100 volts grade, ISI-694 marked with multistranded copper conductor and earth continuity wire with similar 1.5 Sqmm cable (including connecting to earth dolly) drawn through ISI Marked PVC Casing & caping with all accessories etc with mild steel sunken box duly conceled in wall and having PVC modular cover plate with frame suitable for modular switch/ Sockets/ regulators for the following :-

One light/fan point controlled by one No one way switch

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

One bell / buzzer point controlled by one bell push

All as per item No : 5 but point wiring with 2.5 Sqmm two single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 Amp socket outlet point on independent board.

2 runs of 1.5 Sqmm size main cable and one run of 1.5 Sqmm size earth continuity conductor

2 runs of 2.5 Sqmm size main cable and one run of 2.5 Sqmm size earth continuity conductor

2 runs of 4 Sqmm size main cable and one run of 4 Sqmm size earth continuity conductor

2 runs of 6 Sqmm size main cable and one run of 6 Sqmm size earth continuity conductor

S&F Modular switch 01 way 6 Amp , 01 module complete all as specified.

S&F Modular switch 02 way 6 Amp , 01 module complete all as specified.

S&F Modular switch 01 way 16 Amp , 01 module complete all as specified.

S&F Modular bell push 6 Amp, 01 module complete all as specified.

S&F Modular socket, 6 Amp - 2/3 pin combined, 02 module complete all as specified.

S&F Modular socket, 6 Amp/ 16 Amp - 2/3 pin combined, two in one, 02 module complete all as specified.

S&F in repair Modular step fan step regulator, 120 Watt - 02 module complete all as specified.

Supply & fix in repair Bell multi music type complete all as specified.

S&F in repair ceiling rose of 3 phase/ PVC/ polycarbonate, isolated body all as directed.

S&F in repair Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fitting completes all as specified.

S&F in repair highly efficient LED retrofit Lamp 09 W used as a ready replacement for existing GLS/CFL all as specified and as directed. Make: LED Adore 9w of Havells or equivalent in Crompton/Bajaj

S&F in repair for wall mounted LED 8W/10W CRCA fitting 230 V with extruded aluminium heat sink provided for efficient heat dissipation and integral LED rod, electronic driver and connector block etc., complete with all accessories internally prewired including necessary mounting arrangement, provision of new 2 core multistranded copper conductor of size 0.5 sq mm from ceiling rose to fitting including necessary LED polycarbonate tube 2FT 8W complete all as specified and directed. Make:- Cat no SZSLAMX010 of Shakti or equivalent in Crompton/Bajaj/ Havells

S&F in repair for wall mounted LED 18/20 W CRCA fitting 230 V with extruded aluminium heat sink provided for efficient heat dissipation and integral electronic driver connector block etc., complete with all accessories internally prewired including necessary mounting arrangement, provision of new 2 core multistranded copper conductor of size 0.5 sqmm from ceiling rose to fitting including necessary polycarbonate LED tube 4 feet, 18/20 W complete all as specified and directed. Make:- Cat no SZSLAMX020 of Shakti or equivalent in Bajaj/Havells/Crompton

S&F in repair for suspended type 4FT 36/40W LED fitting linear in sleek design 230 V with integral electronic driver connector block etc. complete with all accessories internally prewired including necessary mounting arrangement, provision of 2 core 0.5 sq. mm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed. Make: - Cat part no SZWXPMX040 of Shakti or equivalent in Crompton/Bajaj/Havells

S&F in repair decorative recess mounted luminaire 34/36 Watt LED suitable for 600 mm x 600 mm recess which provides glare free cool white symmetrical illumination and having integral electronic driver connector block etc. complete & necessary mounting arrangement , provision of 2 core 0.5 Sq. mm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed. Make:- Cat Part No LCTLRNE-36-FO-CDL of Crompton or equivalent in Bajaj/Havells/Shakti

S&F in repair decorative recess mounted luminaire 18-Watt LED, round shape and having integral electronic driver connector block etc. complete & necessary mounting arrangement, provision of 2 core 0.5 Sq. mm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed. Make:- Cat Part No BGSLO SLEEK 18W WH RD of Bajaj or equivalent in Crompton/Havells/Shakti

S&F in repair decorative Surface mounted 18W LED luminaire round shape with PDC Aluminium housing & high translucent frosted plastic diffuse and having integral electronic driver connector block etc. complete & necessary mounting arrangement , provision of 2 core 0.5 Sq. mm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed. Make:- Cat No BGSLO SLEEK SURFACE 18W WH RD of Bajaj or equivalent in Crompton/Havells/Shakti

S&F in repair for environment friendly high efficiency with better thermal management type building security light 24/25Watt with integral electronic driver connector block etc. complete with all accessories internally prewired including necessary mounting arrangement, provision of 2 core 1 Sq. mm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed. Make:- Cat Part No SZPSLMM024 of Shakti or equivalent in Bajaj/Crompton/Havells

S&F in repair GI pipe bracket bent to shape drilled / welded made out of 20 to 40 mm dia bore light grade GI Pipe 0.9 metre long for fixing of building security light fitting of any type and description including suitable size of MS clamps, nuts, bolts & washers including two coat of Aluminium paint over one coat of red oxide primer complete all as specified and directed.

Suply and fixing in repair LED decorative post top lantern fitting 25W, 230V AC integral pole mounted with spherical shaped polycarbonate diffuser and IP 65 protection and resistant to impact and corrosion with necessary electrical connection complete all as specified as directed. Make: Cat No BLPTSP 25W LED WW of Bajaj or equivalent model in crompton greaves/Havells / Philips

Supply & fix in repair decorative cylendrical shaped energy saving LED Bollard light fitting 08 to 10 watt 1000 mm long pressure die cast powder coated housing with diffuser with integeral electronic driver connector block etc complete with all accessories internally prewired with neccessary mounting arrangement complete all as specified and directed. Cat Part No MAYAI LBLA1-10-CDL of crompton, 111282 BGBOL 605 9W LED of Bajaj, BAMBOOBLS8WLED857PSYMTOPCM of Havells

S&F in repair Surface mounted 15/18 watt LED slim panel light, square shape with PDC Aluminium housing & high translucent frosted plastic diffuse and integral electronic driver connector block etc. with all accessories internally prewired including necessary mounting arrangement complete all as specified and directed. Make:- Cat no BGSLO SLEEK SURFACE 15W WH SQ of Bajaj or equivalent in Crompton/Havells/Shakti

Supply & fix in repair RGB 18 watt LED under water light with all accessories and mounting arrangement for under water purpose complete all as specified and directed. Make:- SZLFUMX018 or equivalent in Crompton/Bajaj/Havells

S&F in repair Environmental friendly, new generation, energy saving, decorative 7W/9W spike light using COB LED as light source and PDC Aluminium housing high translucent frosted plastic diffuser and integral electronic driver connector block etc. including all accessories internally prewired including necessary mounting arrangement complete all as specified and directed. Make: - Cat No BGSBL 9W LED WW of Bajaj or equivalent in crompton/Havells/ Shakti

Material and labour for plain cement concrete 1: 3: 6 type C2 using 40 mm graded stone aggregate as in foundation of POST TOP LANTERN light including necessary form work etc., complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for laying cables and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

M&L for cutting the existing PCC/bituminous road of any description to a size not exc. 0.45m wide x 0.45m deep for crossing of pipe/cable including refilling, ramming and making top 100mm thick surface good with plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and directed.

Material and labour for river washed and screened, dry sand filing in trenches below and around underground cables for cushioning of cables complete all as specified. Note:- For payment purpose only punned thickness of sand will be measured & paid.

Supply and lay un-reinforced precast concrete cable coverof Class LV type I flat size 250x150x40mm ladi adjacent to each other perpendicular to the direction of cable in trenches all as specified and directed.

Taking out carefully PVC insulated sheathed armoured stranded aluminium conductor LT underground cable upto 25 Sq.mm (2 core) from trenches/ ducts/ walls etc., including necessary dismantling, demolition and disconnecting cables from existing power line complete all as specified and as directed. Note :- (i) Earth work excavation, returning filling and disposal shall be measured & paid separately under respective items. (ii) The surface disturbed during dismantling/demolition shall be made good by contractor at his own cost by using 1:2:4 type B1 concrete (or) in CM 1:4 which deemed to be included in the contractor quoted rate

Supply, lay, joint test and commissioning of LT under ground cable 1100 volt grade, XLPE insulated and PVC sheathed heavy duty armoured with aluminium conductor, IS 7098-I Marked, laid in trenches/ ducts/ fixed on poles/ walls/ laid under roads/ paths/ drains/ culverts or encased in GI pipe including cable glands, lugs jointing material etc., complete all as specified and directed for the following size of cables:-

2 Core, 10 Sq.mm

2 Core, 16 Sq.mm

Supply & fix in repair decorative wall mounted energy saving red & Green Light fitting flexible and adjustable to any direction with integeral electronic driver complete with all accessories complete all as specified and directed. Make:- Any ISI marked make approved by GE

Supply & fix in repair wall mounted energy saving 20 watt LED Spot light light fitting flexible and adjustable to any direction with integeral electronic driver complete with all accessories complete all as specified and directed. Make:- SZSTCMX020 of Shakti or equivalent in Bajaj/Crompton/Havells

S&F in repair for MCB DB TPN 4 way double door sheet metal enclosure comprising of OEM/manufacturer specified bus bar 415 volts, 50 Hz bus bar and neutral link complete including inserting in wall complete all as specified.

S&F in repair for MCB DB VTPN 4 way double door sheet metal enclosure comprising of OEM/manufacturer specified bus bar 415 volts, 50 Hz bus bar and neutral link suitable for MCCB incomer & MCBs outgoing complete including inserting in wall complete all as specified.

S&F in repair for MCB DB SPN 04 way double door sheet metal enclosure with OEM specified common bus bar and neutral link compete to fixtures all as specified.

S&F in repair for MCB DB SPN 08 way double door sheet metal enclosure with OEM specified common bus bar and neutral link compete to fixtures all as specified.

S & F in repair MCCB 4 pole 415 Volts, 63/100 Amps, 16 KA

S&F in repair MCB triple pole and neutral 415 Volts, 63 Amps, 10 KA.

S & F in repair 'C' curve MCB SPN 240Volts 32/40 Amp.

S&F in repair 'C' curve MCB SP 240 volt 6 to 30 Amp.

M&L for plate earthing with galvanised mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth wirte 4 mm dia bolted (with GI nuts, bolts & check nuts) and riveted to earth plate at one end and connected to metallic bodies of equipment’s etc at the other end including 15 mm GI light grade protection pipe with all fittings from top of electrode to body of equipment fixed with iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-2 using 12 mm graded crushed stone aggregate and RCC cover complete all specified and shown in electrical plate No 3 of SSR Part-1 including testing earth resistance and submitting test report to AGE E/M by the contractor complete all as specified & directed. Note :- (i) Earthing resistance required in earthing shall less than 3.0 Ohms after completion of work. All earthing shall be tested by the contractor in presence of Engr-in-Charge. Test result shall be recorded and signed by the contractor and Engr – in- Charge. If contractor fail to achieve the above result the same shall be rectified by the contractor without any extra cost to Govt. The earthing result will be required maintaining up to end of defect liability period of one year and if any variation found in earthing result during defect liability period same will be intimated to the contractor by Engg-in-Charge and contractor shall rectify the same. The quoted rates shall be deemed to include for above said provision. (ii) Quoted rates shall be deemed to be included for earth wire with 15 mm dia protection pipe up to 7.5 length.

Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

Vee kay construction

M/S JAINENDRA KUMAR JAIN