Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.3 LAccepted-AOC PLOT NO 87 CHHOTALAL ESTATE OPP KHEMCHAND DAYALJI GODOWN NAROL ROAD AHMEDABAD GUJARAT 382405 | AHMADABAD | GUJARAT | 382405 | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical NOT SUITABLE | |
| 3 | Rejected-Technical | - | Rejected-Technical NOT SUITABLE |
Tender Value
Refer Docs
Closing Date
3 May 2019, 10:00 amClosed
Mugdha V. Kulkarni
Purchase Department, Trombay Unit, RCF Limited
SUPPLY OF VALVES
2019_RCFL_465680_1
E23019041S
Open Tender
Mechanical Tools and Equipment
Supply
30 days
RCF Trombay Unit
As per NIT.
9 documents required · 9 mandatory
₹0
Exempted
14 Jan 2020
26 Apr 2019
3 May 2019
26 Apr 2019
3 May 2019
26 Apr 2019
GATE VALVE WITH BOLTED BONNET OUTSIDE SCREW & INTEGRAL YOKE; SIZE: 6" NB X 600#; ENDS: BUTT WELDED MOC: (1) BODY & BONNET: ASTM A 216 GR WCB, (2) SEAT RING: ASTM A 105 + HARDFACED WITH STELLITE #6 (API TRIM #5) (3) DISC: ASTM A 216 GR WCB + HARDFACED 13% CR STEEL (API TRIM #5) (5) BONNET GASKET: SPIRALLY-WOUND SS 304 WITH GRAPHITE FILLER, (6) YOKE SLEEVE (BUSH): BRONZE / ASTM A439 TYPE D2 (7) GLAND & GLAND BUSH: ASTM A 105 / ASTM A276 TYPE 304. (8) STEM PACKING: GRAPHITE WITH BRAIDED END RINGS, (9) BACK SEAT: HARDFACED 13% CR STEEL (API TRIM #5) (10) BONNET STUDS & NUTS: ASTM A 193 GR B7 & ASTM A 194 GR 2H, (11) GLAND BOLTS / EYE BOLTS & NUTS: ASTM A 193 GR B7 & ASTM A 194 GR 2H (12) HAND WHEEL: DUCTILE IRON. COMPLIANCE STANDARDS: DESIGN STANDARD: API 600; FACE TO FACE DIMENSIONS: AS PER ANSI B16.10, ; PRESSURE & TEMPERATURE RATING: AS PER ANSI B 16.34; INSPECTION AND TESTING AS PER API 598; NOTES: 1) MTC & HYDROSTATIC TEST CERTIFICATE (AS PER API 598) TO BE FURNISHED ALONGWITH SUPPLY. 2) VALVES TO BE SUPPLIED DULY PAINTED BY AL. PAINT OF MIN. 40 MICRON DFT & PACKED WITH PROPER END CAP PROTECTOR.
SWING CHECK VALVE WITH BOLTED BONNET SIZE: 6"" NB X 600#; ENDS: BUTT WELDED MOC: (1) BODY / COVER: ASTM A 216 GR WCB; (2) SEAT RING: ASTM A 105 + HARDFACED WITH STELLITE #6; (3) DISC: ASTM A 216 GR WCB + HARDFACED 13% CR STEEL; (4) HINGE: ASTM A 216 GR WCB; (5) BONNET GASKET: SPIRALLY-WOUND SS 304 WITH GRAPHITE FILLER; (6) DISC WASHER, DISC NUT PIN AND HINGE PIN: 13% CR STEEL; (7) DISC NUT: SS 304; (8) COVER STUDS & NUTS: ASTM A 193 GR B7 & ASTM A 194 GR 2H; (9) HINGE PIN COVER: ASTM A 105; (10) HINGE PIN COVER BOLT: ASTM A 193 GR B7; COMPLIANCE STANDARDS: DESIGN STANDARD: API 600; FACE TO FACE DIMENSIONS: AS PER ANSI B16.10, ; PRESSURE & TEMPERATURE RATING: AS PER ANSI B 16.34; INSPECTION AND TESTING AS PER API 598; NOTES: 1) MTC & HYDROSTATIC TEST CERTIFICATE (AS PER API 598) TO BE FURNISHED ALONGWITH SUPPLY. 2) VALVES TO BE SUPPLIED DULY PAINTED BY AL. PAINT OF MIN. 40 MICRON DFT & PACKED WITH PROPER END CAP PROTECTOR.
PRESSURE SEAL COVER SWING CHECK VALVE SIZE: 2" NB X 1500#; ENDS: BUTT WELDED MOC: (1) BODY / COVER: ASTM A 216 GR WCB; (2) DISC AND SEAT RING: ASTM A 216 GR WCB + HARDFACED WITH STELLITE #6; (3) HINGE PIN: 13% CR STEEL; (4) GASKET: GRAPHITE; (5) STUDS & NUTS: ASTM A 193 GR B7 & ASTM A 194 GR 2H; COMPLIANCE STANDARDS: DESIGN STANDARD: API 600; FACE TO FACE DIMENSIONS: AS PER ANSI B16.10, ; PRESSURE & TEMPERATURE RATING: AS PER ANSI B 16.34; INSPECTION AND TESTING AS PER API 598; NOTES: 1) MTC & HYDROSTATIC TEST CERTIFICATE (AS PER API 598) TO BE FURNISHED ALONGWITH SUPPLY. 2)VALVES TO BE SUPPLIED DULY PAINTED BY AL. PAINT OF MIN. 40 MICRON DFT & PACKED WITH PROPER END CAP PROTECTOR.
GLOBE VALVE SW, 2" X 1500#, A105, NON IBR; MOC:- BODY AND BONNET- A 105, STEM- A479 TYPE 410 SS, WEDGE DISC/ PLUG DISC- A 276 TYPE 410- STELLITE, YOKE BUSH- A 439 TYPE D2, GLAND BUSH- SS 410, GLAND FLANGE- A 105, GLAND STUD/ NUT:- A 193 B7/ A 194 2H, GLAND PACKING- GRAPHITED WITH INCONEL WIRE CORED, HAND WHEEL- SG IRON, BODY TO BONNET JOINT- SCREWED AND SEAL WELDED. NOTES: 1) MTC AND HYDRAULIC TEST CERTIFICATE TO BE SUBMITTED 2) PRESSURE AND TEMPERATURE RATING AS PER ANSI B 16.34 3) INSPECTION AND TESTING AS PER API 598/ BS 1873 4) SW END CONNECTIONS AS PER ASME B 16.11 5) GENERAL VALVE DESIGN AND WALL THICKNESS AS PER API- 600.
Norflow Controls
XSIS VALVES PVT LTD
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_487863.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .