Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.8 LAccepted-AOC HM 324 PHASE IX SAS NAGAR MOHALI PB | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹20.4 L+₹2.5 L (13.7%)Rejected-Finance | L2 | Rejected-Finance Being L2 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
24 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D Chandigarh
Garrison Engineer I R and D, DIHAR Base Lab, Ground Floor, Near 3 (BRD) AF Stn, Industrial Area, Ph-II, Ramdarbar, Chandigarh
REPAIR TO ROAD AND PATH ETC AT SECTOR 24,37,38,42,28,29,30 AND RCMA BLDG 3BRD AT CHANDIGARH
2023_MES_597057_1
GE I R AND D/CHD-31/2023-24
Open Tender
Civil Works
Item Rate
180 days
Chandigarh
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandigarh
₹50,000
Yes
11 Jul 2023
22 May 2023
26 Jun 2023
22 May 2023
24 Jun 2023
5 Jun 2023
23 May 2023 - 3 Jun 2023
Amount
Material and labour for Repair to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc, cutting around adges making good by applying tack coat @ 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 Sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30mm rolled and compacted to required camber and gradient with 8 to 10 tonne power roller, complete all as specified and directed.
Scarifying or picking gravelled macadam or bituminous macadam surfaces in area n.exc 400 Sqm and exc 50 mm and n.exc 100 mm deep complete all as specified and directed.
Material and labour for applying evently a priming tack coat with bituminous primer by using paving bitumen of v-10 @ 3 KG/10 Sqm over bituminous macadam surface complete all as specified and directed
Material and labour for providing and consolidating premixed dense bituminous macadam (DBM GRADING II) for repairs to unlevelled surfaces by filling, using paving bitumin VG-30 @ 4.50% by weight of total mix laid, rolled and compacted to required gradient and camber with 8 to 12 ton power roller (consolidated thickness of 75mm or less) and laid by mechanical paver finisher complete all as specified and directed.
Material and labour for preparing existing black top surfaces surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleared surfaces with gunny bag to remove all loose dirt etc complete all as specified and directed.
Material and labour for applying evenly a priming tack coat with bituminous primer by using paving bitumen of V-10 grade @ 5 kg/10 Sqm complete all as specified and directed.
Material and labour for laying Bituminous semi dense asphaltic concrete 40mm consolidated thickness with 5.40% binder content by weight , VG-30 grade by weight of total mix,aggregate grading as per Grading 1 of Table 500-17 of MORTH specification of roads and bridge works 2013, made with self propelling mechanical paver, rolled and consolidated to reqd camber and gradient with 8 to 12 tonne power roller to a uniform smooth surface, required camber and gradiebt, complete all as specified and directed. ( Note :- (i) Work shall be executed as per design mix approved by the GE. (ii) Filler shall be cement (OPC-43 Grade) (iii) Any variatiion in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to the department. However, if binder content works out to be on minus side during design process (i.e less than 5.40%) same shall be adjusted considering the bitumen rate given in particular specification.
Material and labour for hot applied thermoplastic road marking compound minimum 2.5mm thick,using indegeneous modern propeller road marking machine including reflectorising glass beads @ 250gms per sqm area, thicknessof 2.5mm is exclusive of surface applied glass beads, as per the code of practice for road marking paints, white with hot thermoplastic road marking compound all as directed including applying one coat of sealing primer including all materials and labour, brushes, tools, equipment, fuel etc complete including applying paints in lines, dashes, arrows etc complete all as specified and directed. Note:- Road marking paint shall be carried out in accordance with manufacturere's instructions and as specified in particular specifications.
Supply and fixing for metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed
Supply and fixing for solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed.
Material and labour For Stone kerb of roughly squared stones of size 20cm x 30cm, dressed so that the maximum depression from a straightedge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 complete all as specified and directed.
Material and labour for PCC chequered tiles with white cement and pigment 30cmX30cmX25mm thick set & jointed in neat cement slurry as in path, pavement, floors, etc over 15mm thick screed bed CM (1:6) complete all as specified and directed.
Material and labour for 12mm thick premium quality tiles hi-traffic range of endura full body vitrified with anti skid finish,square in shape,area of each tile exceeding 0.08 sm but not exceeding 0.10 sm laid in floor/pavings set and jointed on screed bed of 40mm thick in Cement mortar 1:4 complete all as specified and directed.
Material and labour for convex road safety mirror 24 inch Dia, hoisted in MS Pole 3 m height and 50 mm dia with clamp arrangement including excavating in post holes each n exc 0.5 cu. m, getting out, returning, including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed
Machine pressed precast leather-finish, coloured, concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid over a layer of fine river sand, watering and consolidating complete all as specified and directed. . (Note: Sand will be measured paid for seperately under respective item supplied only).
Material and labour for sand cushioning including watering,ramming and consolidation complete all as specified and directed.
Material and Labour for PCC type C-2 (1:3:6) ,40mm graded aggregate , 75mm thick complete all as specified and directed.
Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thickaluminium sheet, face to be fully covered withhigh intensity encapsulated type heat activatedretro reflective sheeting conforming to type - IVof ASTM-D 4956-01 in blue and silver white or other colour combination including subjectmatter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and whitecolours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing ,complete all as specified and directed.
Material and labour for 100mm thick cement concrete type B 1 PCC (1:2:4) (using 20mm graded aggregate) as in hard standing finished even laid in alternate panel and smooth without using extra cement and spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floor, any thickness (below or above ground level) complete all as specified and directed.
Supply and fixing for PVC (SWR) pipes double socketed 110mm dia, in any length with rubber ring joints complete all as specified and directed.
Supply and fixing for PVC (SWR) bends 110mm radius.
Supply and fixing for PVC (SWR) junction single, (Single T) equal or unequal 110mm radius. complete all as specified and directed.
Supply and fixing for Stack clamps out of 50 mm by 5 mm flat iron Any dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
Material and labour for clearance and removing of bushes vegetation growth including taking out roofs of bushes/vegetation growth upto 30 cm deep and disposal of rubbish to a distance not exc 100m complete all as specified and directed
Dismantling/taking down AC, CI, & PVC rain water pipe (any size) including all fittings, head shoes, bends complete and removing from site from ground level complete all as specified and directed.
Dismantling floor tile of any make including cement mortar bedding and removing the rubbish off the premises complete all as specified and directed.
shree balaji builders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .