14/EDC(BLP)/2024-25

Amount

Loading, Unloading and safe cartage of the following materials from Electricity Store Centre, Balrampur to the work site/dump site (Distance up to 70 km)

ST Poles (11 mtr long)

PCC Poles (9 mtr long)

PCC Poles (8.5 mtr long)

ACSR Weasel Conductor

ACSR Rabbit Conductor

ABC 3X95+1X70+1x35 sq.mm.

ABC 3X50+1X35+1X16 sq.mm

33KV & 11 KV V-Type Steel X-Arm.

11 KV XLPE cable 3x300sq.mm.

11 KV XLPE cable jointing kit3x300sq.mm.O/D

11 KV XLPE cable jointing kit 3x300sq.mm.I/D

11 KV XLPE cable 3x185sq.mm.

11 KV XLPE cable jointing kit 3x185sq.mm.O/D

11 KV XLPE cable jointing kit 3x185sq.mm.I/D

LT XLPE cable 1x120sq.mm.

LT XLPE cable 1x240sq.mm.

LT XLPE cable 1x400sq.mm.

Other line materials

Erection/Interpolling of Single ST Poles (11 Mtr Long) for 11 KV/L.T. line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site

Erection/Interpolling of Single PCC Poles (9 Mtr Long) for 11 KV/L.T. line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site

Erection/Interpolling of Single PCC Poles (8.5 Mtr Long) for 11 KV/L.T. line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site

Erection/Interpolling of sectional Double pole sectional PCC pole (8.5 mtr long PCC Pole) alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site.

Earthing of 63 KVA Transformer MS earth rod (1800x20mm) into soil by hammering and properly fastening with Gl wire to each support by nut & bolt. Earthing rod must be 0.15 Mtr.above from the plinth of the support. All type nut & bolts would be given by the contractor(Earthing rod provided by the department).

Earthing of PCC poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastening with Gl wire to each support by nut & bolt. Earthing rod must be 0.15 Mtr.above from the plinth of the support. All type nut & bolts would be given by the contractor.

Erection of stay set with stay wire, stay clamp & stay insulator including with grouting of stay set by concrete of ratio 1:4:8 as per RESSPO norms before back fitting of the pits including binding, climbing, clamping, tightening and nozzeling of stay wire in all respect as per RESSPO norms. All clamps, nuts, bolts, stay insulator, cement. Brick, ballast, sand etc would be provided by the contractor.

Grouting of PCC Pole at the time of erection of pole in 1:4:8 concrete ratio from bottom of pole to ground level and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing. All material would be provided by the contractor.

Laying, stringing, sagging & binding of Weasel conductors of 11 KV in 3 phase, 3 wire line with jumpering (where as required)(Replacement of jarjar by new conductor/cable)

Laying, stringing, sagging & binding of Rabbit conductors of 11 KV in 3 phase, 3 wire line with jumpering (where as required)(Replacement of jarjar by new conductor/cable)

Laying, Stringing & Sagging of ABC Cable up to proper sag for the following size cable (Replacement of jarjar by new conductor/cable)

3X95+1X70+1x35 sq.mm.

3X50+1X35+1X16 sq.mm

Gaurding of 11 KV line at various road crossing and crowdy area. (where is required)

Replacement of Wooden X-Arm by new 33KV & 11 KV V-Type Steel X-Arm. (where is required)

Laying of 11 KV XLPE cable 3x300sq.mm. (U.G./O.H.) as per RESSPO norms.

Errection & Fitting of 11 KV XLPE cable jointing kit3x300sq.mm.O/D

Errection & Fitting of 11 KV XLPE cable jointing kit 3x300sq.mm.I/D

Errection of Laying of 11 KV XLPE cable 3x185sq.mm.(U.G./O.H.) as per RESSPO norms.

Errection of 11 KV XLPE cable jointing kit 3x185sq.mm. O/D

Errection of 11 KV XLPE cable jointing kit 3x185sq.mm.I/D

Installation of Lead cable of Various Distribution Transformer Installed on 11 KV feeders eminating from diffrenet 33/11 KV S/S. Size of LT XLPE cable 1x120sq.mm.

Installation of Lead cable of Various Distribution Transformer Installed on 11 KV feeders eminating from diffrenet 33/11 KV S/S. Size of LT XLPE cable 1x240sq.mm.

Installation of Lead cable of Various Distribution Transformer Installed on 11 KV feeders eminating from diffrenet 33/11 KV S/S. Size of LT XLPE cable 1x400sq.mm.

Cutting of tree branches for cleaning route of 11 KV/L.T line at the work site

Bundling, Wrapping and Carriage of G.I. wire 6 S.W.G./Conductor from worksite to ESC, Balrampur.

Decentralized Items:-Providing and fixing of following materials sanctioned Estimate/Package as per RESSPO U.P.P.C.L. drawing/ norms.(where is required).

F-Bracket

X-Arm holding clamp

Top T-off Holding

Dropper Channel

Nuts & Bolt.

Al Lug of Appripriate size

Copper L-Piece 50x50x50mm.

F-Clamp for ST/PCC

G.I. Pipe 6" Dia

XLPE cable Holding clamp

I-Hook with clamp

MS JANMEJAI SINGH CONTRACTOR

Ms Agarwal Electric Traders